EverFocus EHD650 - Manual
EverFocus EHD650 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; OSD
- Page 4 – Package Contents; OPTIONAL ACCESSORIES
- Page 7 – Hardware Overview
- Page 8 – Detail Installation Steps:; Figure 1; Locking Screws; Figure 2
- Page 9 – Instruction for rotating the camera mounting; Please unscrew fixing screws that hold the camera module.
- Page 10 – Mounting Cameras on the Ceiling/Wall
- Page 11 – Conduit cable and Connect Power and Video; conduit in the bag and wire power connection cable through it.; Conduit plug
- Page 12 – Figure 7
- Page 13 – V. Phase adjustment screw; is located on the termination board. The vertical phase; Micro Switch for Alarm trigger
- Page 14 – Adjust Lens zoom and focus and View; Adjust view angle; Zoom
- Page 18 – : Press SET button and you can return to the previous page.; : Press SET button and you can return to the previous page.
- Page 22 – Internal; SYNC – LINELOCK
- Page 24 – you will be asked “Are you sure?” before; SW REV; indicating firmware version.
- Page 25 – EverFocus Electronics Corp.
EVERFOCUS
1/3” Wide-Dynamic
True D/N Rugged Dome Color Camera
Operation Instructions
Model No.
EHD650
Please read this manual first for correct installation and operation. This manual should be retained
for future reference. The information in this manual was current when published. The
manufacturer reserves the right to revise and improve its products. All specifications are therefore
subject to change without notice.
PRECAUTIONS
1. Do not install the camera near electric or magnetic fields.
Install the camera away from TV, radio transmitter, magnet, electric motor, transformer,
audio speakers since the magnetic fields generate from above devices will distort the video
image.
2. N
e
ver disassemble the camera nor put impurities in it.
Disassembly or impurities may result in trouble or fire.
3. Never face the camera toward the sun.
Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.
4.
Keep the power cord away from wet and never touch the power cord with wet hands.
Touching the wet power cord with hands or touching the power cord with wet hands may
result in electric shock.
5. Never install the camera in areas exposed to water, oil or gas.
Water, oil or gas may result in failure, electric shock or file.
6. Cleaning
Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from
the camera body. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor
and the camera lens.
7. Do not operate the camera beyond the specified temperature, humidity or power source
ratings.
Use the camera at temperatures within -40
℃
~ 50
℃
(-40
℉
~122
℉
)
and humidity between
20%~80%. The input power source is 24VAC .
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
- 2 - TABLE OF CONTENTS 1. PRODUCT OVERVIEW ........................................................................................................................... 3 1.1 M AIN F EATURES .................................................................................................................
- 4 - 1.2 Package Contents z Camera Unit x 1 z Mounting Accessory includes: - Screws x 4 - Expanding Screws x 4 - Wrench x 1 z Weather-proof Conduit x 1 z Extension Power Cable and Video cable x 1 z Extension Power Cable x 1 z Desiccant Pack x 1 z Manual x 1 OPTIONAL ACCESSORIES z Wall Mount Bracket...
- 7 - 1.5 Hardware Overview Conduit plug setscrew Side conduit hole Back conduit hole Mounting Setscrew Mounting Setscrew Mounting Setscrew Mounting Setscrew OSD mini-joystick Controller Camera Module
