Euromaid ETTW800 - User Manual

Page 3 - CONTENTS

Safety Precautions Explanation of the symbolsInstallation Installation requirements Install upper drain hose Changing the position of the drain hose Installation positionOperation Preparation instructions Reference of laundry quantity corresponding to different capacities Laundry volume and detergen...

Page 4 - SAFETY PRECAUTION; Safety Precaution; For your safety, the information in this manual must be followed; MAXIMUM WATER PRESSURE

-1- SAFETY PRECAUTION Safety Precaution For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury or loss of life. This appliance is not intended for use by persons (including children) w...

Page 6 - INSTALLATION; Installation Requirements

-3- INSTALLATION Installation position In order to avoid electrical failure, discoloration and deformation, do not install the machine in the following places: • Locations exposed to direct sunlight • Locations exposed to rain or snow • Locations with uneven or unstable ground Installation Requireme...

Page 7 - OPERATION; Preparation Instructions; Jacket

-4- Water level Fabric type Laundry capacity (kg) Water flow Wash time (minutes) Detergent amount (g) Synthetics, silk, delicate fabrics Cotton or linen Heavy Soils 0 - 5.0 5.0 - 6.5 0 - 6.5 6.5 - 8.0 0 - 6. 5 6.6 - 8.0 Low Mid Mid High Mid High Gentle Gentle Normal 3 3 - 5 7 7 - 10 10 10 -35 (soak ...

Page 8 - Machine Overview

-5- Accessories Inner spin cover Water inlet hose Control Panel Overview • Water inlet: for the connection of hot or cold water.• Wash timer: for selection of the desired wash time.• Spin timer: for selection of the desired spin time. • Program selector: for washing or rinsing, select “ Gentle”or“ N...

Page 9 - Quick Start

-6- Washing Method Rinsing Method 1. Install the washing machine 2. Load the laundry 6. Repeat the steps 3-5 for rinsing 7. Move the laundry into the spin tub and close the spin cover 8. Turn the spin timer knob to set spin time 9. Remove the laundry from the spin tub 3. Add detergent and water into...

Page 10 - Spinning Method

-7- Spin Cover Safety Cover 1. Shake out the laundry and place into the right hand side of the machine (spinning drum). 2. Place the inner spin cover on top of the laundry and ensure it is lying horizontal. 3. Close the safety cover and the spin cover. Correct Incorrect Inner spin cover Spin tub 4. ...

Page 11 - MAINTENANCE; Notes

-8- OPERATION Energy and Water (WELS) ratings The tests for AS/NZS 2040 & AS/NZS 6400 Energy and Water (WELS) ratings were carried out under program normal . Below is the detail for test seting and steps; 1. Main wash: 30 min., H water level, wash temperature 40 ‘C ; 2. Spin: 3 min., 2 times; 4 ...

Page 12 - Main Technical Parameters

-9- • Check that the power supply is in good condition.• Check that the power plug is inserted properly. • Check that the wash timer knob or the spin timer knob is not in the "0" position. • Check that the drain hose is not laid too high.• Check that the drain hose is not frozen.• Check that...

Page 13 - MANUFACTURER GUARANTEE

MANUFACTURER GUARANTEE This warranty is provided in Australia by Glen Dimplex Australia Pty Limited ABN 69 118 275 460 (Phone number 1300 556 816) and in New Zealand by Glen Dimplex New Zealand Limited NZBN 9429000069823 (Phone number 09 274 8265) in respect of the Euromaid product. 1. Euromaid Expr...

Page 15 - NOTES