Page 3 - Table of Contents
Fixed Wireless Terminal: G32 & G36 3 Table of Contents Table of Contents .........................................3 Welcome ......................................................4 Fixed Wireless Terminal ................................6 Installation ................................................
Page 4 - Welcome; Disposal of the product
4 Fixed Wireless Terminal: G32 & G36 Welcome Welcome to the User Guide for the G32 / G36 Fixed Wireless Terminal. Important information: Some of the services described in this guide might not be supported by all networks. Please, contact your network operator for information on different network...
Page 5 - FCC Statement
Fixed Wireless Terminal: G32 & G36 5 Copyright No part of this document may be reproduced without the written per-mission of the copyright owner. The contents of this document are subject to revision without notice due to continued progress in methodology, design and manufacturing. Ericsson shal...
Page 6 - Fixed Wireless Terminal; Product Description
6 Fixed Wireless Terminal: G32 & G36 Fixed Wireless Terminal Product Description The FWT is a flexible and cost-effective solution for connection to the wireless GSM network when there is no fixed line infrastructure or if you need additional telephone lines. The G36 can also be connected to a P...
Page 7 - Supplied Parts; List of Components
Fixed Wireless Terminal: G32 & G36 7 Supplied Parts After unpacking, please check that the following parts and list of compo-nents are included: List of Components 1. FWT unit 2. Antenna 3. 4 x mounting screws 4. Power cable (USA, UK, EU or AUS) 5. AC/DC adapter 6. Wall mount bracket 7. Telephon...
Page 8 - External Connector and Indicators
8 Fixed Wireless Terminal: G32 & G36 External Connector and Indicators
Page 9 - Installation; SIM Card; Assembly
Fixed Wireless Terminal: G32 & G36 9 Installation SIM Card Your network operator provides you with a SIM (Subscriber Identity Module) card. The SIM card contains information about your telephone number and the services included in your subscription. Preparing Your FWT You need to follow these st...
Page 10 - Connecting a telephone to the FWT
10 Fixed Wireless Terminal: G32 & G36 2. Remove the front cover, by pressing down and pushing the small tab that is in the center of the bottom part of the FWT. Open the SIM Card holder and insert the SIM Card. 3. Close the SIM Card holder, placing it horizontally and securing it with the slidin...
Page 11 - Switch on the FWT; Enter PIN
Fixed Wireless Terminal: G32 & G36 11 Switch on the FWT Connect the power supply. The FWT switches on automatically and the LED indicators start flashing. Note: If the Power LED is off, there is a problem with the power supply. Please refer to the topic Troubleshooting documented on page 61 for ...
Page 12 - Network Search
12 Fixed Wireless Terminal: G32 & G36 2. Check that your computer has the standard modem installed, if not add one by following the steps described in PC Data Configurations on page 34. 3. Open your Web Browser on your PC, and type in the following URL: http://192.168.1.1/pin.asp 4. The followin...
Page 13 - Installing the FWT on the Wall; FWT Location
Fixed Wireless Terminal: G32 & G36 13 Now you have prepared the FWT for wall installation. Please, follow the instructions below for complete wall installation. Installing the FWT on the Wall FWT Location The GSM signal strength available at the FWT location affects the per-formance of the unit....
Page 14 - Wall mounting
14 Fixed Wireless Terminal: G32 & G36 Wall mounting Please proceed as indicated in the following picture. 1. Fix the wall-mounting bracket on the wall. 2. Press the FWT against the wall-mounting bracket. 3. Slide the FWT downwards. Warning: Once you have fixed the FWT to the wall and switched it...
Page 16 - Connecting Devices to the FWT; Connecting devices to the FWT
16 Fixed Wireless Terminal: G32 & G36 Connecting Devices to the FWT Warning: Before you start any connections please refer to the topic Product Care and Safety documented on page 71 for more detailed information and contact your network operator if you have any questions. Warning: To ensure good...
Page 17 - Installing the FWT as a telephone line
Fixed Wireless Terminal: G32 & G36 17 The FWT is also equipped with a USB port that enables you to use it as a GSM modem. This enables PC fax and for data transfers as well as SMS services. Note: When making the connections, the two-wire telephone cable polarity does not matter. Tip: If your hom...
Page 18 - Connecting the FWT to a PBX; Generic requirements
18 Fixed Wireless Terminal: G32 & G36 communication can take place at a time, in the same way as an ordinary fixed line. You cannot, for example, receive or originate a telephone call while sending or receiving a fax. Warning: In order to avoid GSM interferences (noise), place the FWT at least t...
Page 19 - G36 FWT connectivity to the analog trunk of the PBX
Fixed Wireless Terminal: G32 & G36 19 • The trunk card must support either Busy Tone Detection (BTD) or Polarity Reversal Detection on answer and release. • The PBX can be programmed to utilize Least Cost Routing (LCR), if available, to automatically choose the trunk where the G36 FWT is connect...
Page 20 - Using telephones; Using fax machines; Sending a fax
20 Fixed Wireless Terminal: G32 & G36 Routing (LCR) programmed PBX. Once LCR is programmed, make a call to a mobile telephone number. See if the call is established through the FWT and check the speech quality. If the PBX does not offer the LCR option, choose the FWT trunk manu-ally with a speci...
Page 21 - Receiving a fax; Connecting PCs
Fixed Wireless Terminal: G32 & G36 21 destination number (B-number) in order to inform the FWT that the next call is a fax call (Example: *01*B-number). This is not usually necessary, as most faxes automatically send the CNG tone so that the fax call is made automatically by the FWT. Receiving a...
Page 22 - GSM data
22 Fixed Wireless Terminal: G32 & G36 EDGE/GPRS data access type allows you to make outgoing connec-tions only, usually to connect to the Internet. Your GSM network opera-tor provides you with an Internet connection as part of the EDGE/GPRS service. Warning: The EDGE /GPRS data communication ser...
Page 24 - Changing Volume
24 Fixed Wireless Terminal: G32 & G36 Advanced Features If a DTMF telephone is connected to the FWT, the following features can be accessed. Changing Volume During a call, you can increase or decrease the reception volume level. • Increase volume: dial R#### • Decrease volume: dial R**** Call Di...
Page 25 - Call Restriction / Call Barring
Fixed Wireless Terminal: G32 & G36 25 Note: If instead of hearing beeps you can hear a deep tone, this means that there has been an error in the activation or the deacti-vation. Call Restriction / Call Barring You can restrict certain types of calls that can be made or received. You need a passw...
Page 26 - Multiparty Calls
26 Fixed Wireless Terminal: G32 & G36 Note: If instead of hearing beeps you hear a deep tone, this means that there has been an error in the activation or deactiva-tion Multiparty Calls You can handle more than one call simultaneously. For example, you can put an ongoing call on hold, while you ...
Page 27 - Call waiting service; Making a Second Call
Fixed Wireless Terminal: G32 & G36 27 Call waiting service If you wish to be able to receive a second call while another call is in progress, you must turn on the call waiting service. Note: These dialing sequences may vary depending on your network operator. If these do not work, please consult...
Page 28 - Conference Calls; Explicit Call Transfer
28 Fixed Wireless Terminal: G32 & G36 • To put the ongoing call on hold and answer the waiting call: press R2 R2 R2 R2. You can switch again between both calls by pressing R2 R2 R2 R2 each time. Note: If “divert when busy” is on, the waiting call is diverted to the number you have specified. Con...
Page 29 - Phonebook / Abbreviated Dialing; Voice Mail
Fixed Wireless Terminal: G32 & G36 29 Phonebook / Abbreviated Dialing You can store telephone numbers in either the SIM card memory or the FWT memory. Up to 99 telephone numbers can be stored in each of them. The following table shows how to manage the phonebook with the 99 memory positions (Pos...
Page 31 - SIM Card Security; To Manage your SIM Card; To Change your PIN
Fixed Wireless Terminal: G32 & G36 31 Note: If instead of hearing beeps you hear a deep tone, this means that there has been an error in the activation or deactiva-tion. SIM Card Security To Manage your SIM Card Most SIM cards are locked at the time of purchase. If the SIM card lock is on, you h...
Page 32 - To Unblock your SIM Card
32 Fixed Wireless Terminal: G32 & G36 Alternatively, use the Web interface. Please follow these steps before you enter your PUK code: • Open your Web Browser on your PC, and type in the following URL: http://192.168.1.1/puk.asp • The following screen will be displayed: • Type the new value in th...
Page 34 - PC Data Configurations; USB Driver Installation
34 Fixed Wireless Terminal: G32 & G36 PC Data Configurations USB Driver Installation The Windows ™ operating system requires an upgraded USB driver to allow access to the FWT. To install the driver, follow the following in-structions: • Insert CD into CDROM drive • Select Setup and double click ...
Page 55 - Web-based Configuration
Fixed Wireless Terminal: G32 & G36 55 Web-based Configuration This chapter describes the interface and user settings (volume, ringing signals, dial speed setups etc) that are available and the procedures for the use of your PCs standard modem to make data calls (Internet browsing, e-mail, etc.) ...
Page 56 - Localization; User settings
56 Fixed Wireless Terminal: G32 & G36 Localization Allows you to change the language in which the web page will be dis-played. The options are: • English (default) • Spanish User settings This option will allow you to change the reception volume level from 0 to 3, the default is 1.
Page 57 - Ringing Signals; Ring Signal functionality
Fixed Wireless Terminal: G32 & G36 57 Ringing Signals Ring Signal functionality Activation of the ring signal functionality according the following condi-tions: • Disabled for all incoming calls • Enabled for all incoming calls • Enabled only for voice calls • Enabled only for fax calls • Enable...
Page 58 - Data ringing signal defined sequence; Calling Line Identification Presentation
58 Fixed Wireless Terminal: G32 & G36 Data ringing signal defined sequence Ringing signal used for incoming data call. Calling Line Identification Presentation Selection of Calling Line Identification Presentation (CLIP) functions. Allowed protocols are: • ETSI V.23 • ETSI DTMF • Bellcore • None...
Page 59 - Minute minder; Call Setup
Fixed Wireless Terminal: G32 & G36 59 Abbreviated Dialing This check box option allows a user to Enable/Disable the abbreviated dialing function. By default, this functionality is set to Enabled. Dial Speed Setup This setting allows you to adjust the dialing speed (interval between digits). Ther...
Page 60 - Change PIN; IP Address
60 Fixed Wireless Terminal: G32 & G36 • Bearer capability – the bearer capability associated to a destination number. This bearer capability can be voice, fax or circuit-switched data. Change PIN This section allows you to change your PIN and PIN2. Please refer to the topic To Change your PIN do...
Page 61 - Troubleshooting; LED indicators
Fixed Wireless Terminal: G32 & G36 61 Troubleshooting This chapter describes the procedures to identify and, if possible, cor-rect problems that might occur with the FWT or its installation. Some problems require that you call your network operator, but most prob-lems you may encounter can be ea...
Page 64 - Audible Tones
64 Fixed Wireless Terminal: G32 & G36 Audible Tones The FWT generates audible tones in your telephone set, thus providing the same service characteristics as the one given by the traditional fixed line network. The following table describes the nature of the main tones you will get when using th...
Page 65 - Technical Data; GSM Air Interface
Fixed Wireless Terminal: G32 & G36 65 Technical Data GSM Air Interface Frequency Bands: GSM 850/1900 or GSM 900/1800. GSM 850 Frequencies: TX 824-849 MHz, RX 869-915MHz RF power: Maximum 2 W (30 dBm) Power class 4 GSM 900 Frequencies: TX 880-915 MHz, RX 925-960 MHz RF power: Maximum 2 W (33 dBm)...
Page 66 - FWT Interfaces; Basic Kit; USB Interface
66 Fixed Wireless Terminal: G32 & G36 FWT Interfaces Basic Kit The Basic Kit consists of: FWT unit, power supply, mains cable, wall-mount bracket, antenna, Quick Guide and User Guide manuals and telephone cable. • Size: Height 148 mm, Width 165 mm • Depth: 45 mm • Weight: 310 grams • SIM card: S...
Page 68 - Accessories; Antennas; External dual band omni directional antenna
68 Fixed Wireless Terminal: G32 & G36 Accessories The G3x series FWT benefits from a wide range of accessories, which ensure the best and easiest way to install, serve and maintain the FWT, enhancing their functionality. Only these, approved-by-Ericsson, acces-sories will guarantee the quality a...
Page 69 - Battery; Battery Cable; DC/DC Power Converter; Mechanical Antitheft Lock
Fixed Wireless Terminal: G32 & G36 69 Battery The FWT can be installed with a backup battery: • Rechargeable lead-acid battery: 6V, 1.2-1.3 Ah with 2.5 hours con-tinuous conversation, 13.5 hours stand-by. Warning: Ericsson recommends precaution when handling lead-acid batteries, and also special...
Page 70 - Mechanical Antitheft Key
70 Fixed Wireless Terminal: G32 & G36 from the wall mounting bracket. The FWT can be removed by using the Mechanical Key Mechanical Antitheft Key The mechanical key is used to “unlock” the FWT in cases of the me-chanical lock being used. The key is inserted into the “keyhole” at the bottom of th...
Page 71 - Product Care and Safety; Product care
Fixed Wireless Terminal: G32 & G36 71 Product Care and Safety Note: Please read this information before using your FWT. Save this User Guide since it contains important safety information and operating instructions. Product care • Treat your product with care. Keep it in a clean and dust-free pl...
Page 72 - Antenna care; Radio wave exposure information
72 Fixed Wireless Terminal: G32 & G36 Antenna care • Use only an antenna that has been specifically designed and ap-proved for your FWT. Use of unauthorized antennas, modifications, or attachments could damage the FWT and may violate the appro-priate regulations, causing loss of performance and ...
Page 74 - Battery information; Moving or Storing the FWT
74 Fixed Wireless Terminal: G32 & G36 Battery information Warning: When a battery is not installed or is connected to a terminal that is switched off, it should be recharged during 24 hours every 6 months. • Do not expose the battery to extreme temperatures, never above +60°C. For maximum batter...
Page 75 - Warranty; Limited Warranty; Ericsson Warranty; What Ericsson will do
Fixed Wireless Terminal: G32 & G36 75 Warranty Limited Warranty Thank you for purchasing this Ericsson Product. To get the maximum use out of your new product, we recommend that you follow a few sim-ple steps: • Read the Guidelines for safe and efficient use. • Read all of the terms and conditio...
Page 76 - Conditions
76 Fixed Wireless Terminal: G32 & G36 For efficiency purposes, Customers are reminded that should their Erics-son Product need warranty service, they return it to the dealer from which it was purchased or call their local Ericsson helpdesk for further information on warranty claims. Conditions 1...
Page 78 - Glossary
78 Fixed Wireless Terminal: G32 & G36 Glossary The following definitions are supplied in order to better understand cer-tain concepts included in this manual: B B B B ----number number number number The B-number refers to the number that you dial. It is also commonly referred to as destination n...
Page 80 - Index
80 Fixed Wireless Terminal: G32 & G36 Index A Abbreviated Dialing, 28, 58 Accessing the battery compartment, 74 Accessories, 68 Advanced Features, 24 Alternate Line Service (ALS), 30 Antenna care, 71 Antennas, 68 Assembly, 9 Audible Tones, 64 B Basic Kit, 66 Battery, 69 Battery Cable, 69 Battery...
