Page 2 - Contents; Introduction
2 Contents Contents Introduction 5 Projector Parts 6 Remote Control 8 Optional Accessories 9 Registration and Warranty 9 Using This Manual 10 Setting Up the Projector 11 Choose a Location 11 Installing the Projector 15 Connecting the Cables 17 Connecting Video and Computer Equipment 17 Making Other ...
Page 3 - Making Detailed Adjustments
Contents 3 Advanced Color Adjustments 30 Adjusting the Gamma Setting 31 Adjusting RGBCMY 32 Locking the Projector 32 Making Detailed Adjustments 34 Using the Menu System 34 Changing How the Menus Display 35 Adjusting the Picture Quality 36 Input Brightness Settings 36 Sharpness and Picture Quality S...
Page 4 - Maintenance
4 Contents Maintenance 56 Cleaning the Lens 56 Cleaning the 3D Glasses 57 Cleaning the Projector Case 58 Cleaning and Replacing the Air Filter 58 Replacing the Lamp 60 Resetting the Lamp Usage Timer 63 Checking the Projector Status 63 Storing the Projector 64 Transporting the Projector 64 Problem So...
Page 6 - Projector Parts; Front
6 Introduction Projector Parts Air exhaust Projector lens Adjustable foot HDMI ports External 3D IR port Remote receiver Vertical lens shift dial Front Back Lamp cover Air intake Air filter cover Power inlet Kensington ® lock port RS-232C port Video port PC port Control panel Horizontal lens shift d...
Page 7 - Bottom
Introduction 7 Escape button Power button Mounting bracket attachment points Bottom Projector Control Panel Source button Menu navigation/ vertical keystone buttons Front adjustable feet Menu button Enter button Retractable cover
Page 8 - Remote Control
8 Introduction Remote Control Source buttons Switch between equipmentconnected to the projector On button Turns projector on Menu navigationbuttons Color Mode button Quickly change color settings to match room lighting HDMI Link button Enables and disables the HDMI link function Illumination button ...
Page 9 - Optional Accessories; Quick; Home Service. In the unlikely event of an
Introduction 9 Optional Accessories Epson provides the following optional accessories for the projector: In addition to the accessories listed above, 1-year and 2-year extended service plans are available. You can purchase these plans and other accessories from an authorized EPSON reseller. To find ...
Page 10 - Using This Manual; Please follow these guidelines as you read through the manual:; If you need more help, you can use the EPSON
10 Introduction Using This Manual This book contains all the information you need to use the projector, in addition to basic setup and maintenance instructions, troubleshooting tips, important safety instructions, specifications, and warranty information. Please follow these guidelines as you read t...
Page 11 - Setting Up the Projector; Choose a Location
Setting Up the Projector 11 Setting Up the Projector Follow the instructions in this section to choose a location for the projector, connect the cables, and display an image. Choose a Location You can install the projector for the viewing setups shown below, as well as rear projection. Front Ceiling
Page 14 - Also keep these considerations in mind:
14 Setting Up the Projector To determine the exact image size when you know the projection distance (or the exact projection distance when you know the desired image size), you can use the Image Size Calculator. This program is available on the EPSON website at epson.com/support (U.S.) or epson.ca/s...
Page 15 - Installing the Projector; button on the remote control.; button to exit the menu system.
Setting Up the Projector 15 Installing the Projector To install the projector, you first need to determine the location, based on the size of your screen (maximum diagonal image size). Use the tables on page 13 as a guide to positioning the projector. To suspend the projector from a ceiling, you wil...
Page 17 - Connecting the Cables; Connecting Video and Computer Equipment; Mac
Setting Up the Projector 17 Connecting the Cables Connecting Video and Computer Equipment You can connect the projector to many types of video equipment, such as a Blu-ray Disc ™ /DVD player, digital tuner, cable or satellite box, video game console, camcorder, or digital camera. You can also connec...
Page 18 - For best results, connect your video equipment to the; equipment doesn’t support HDMI, connect it to either the; Connect the HDMI cable to one of the HDMI ports on the projector.
18 Setting Up the Projector For best results, connect your video equipment to the HDMI port, if possible. If your equipment doesn’t support HDMI, connect it to either the Component (for high quality, component video) or Video (for composite video) port. Note: You need to use a version 1.4 or higher ...
Page 19 - Making Other Connections; port and set the Trigger Out menu option to
Setting Up the Projector 19 Making Other Connections Connect the power cable and other cables described below, depending on how you plan to use the projector. ■ Plug the power cable into the projector and a grounded electrical outlet. ■ To use an AV controller with the projector, connect a 9-pin nul...
Page 20 - Installing Batteries in the Remote Control; Turning On the Projector
20 Setting Up the Projector Installing Batteries in the Remote Control The remote control uses two AA batteries. Warning: Keep batteries away from children. If a battery is swallowed, contact your doctor immediately. 1. Release the tab and lift open the cover. 2. Insert two new AA batteries as shown...
Page 21 - Turning Off the Projector; Selecting the Image Source
Setting Up the Projector 21 The power light flashes while the projector warms up. If you don’t see a picture, you may need to change the image source as described on page 21. Turning Off the Projector 1. Turn off any equipment connected to the projector. 2. Press the P power button on the projector ...
Page 22 - If you press the; Positioning the Image
22 Setting Up the Projector If you press the source button on the projector, you see a list of available sources. Press the source button to move through the list and select the desired source. Note: If an image does not appear, see “Problem Solving” on page 65. To temporarily turn off the image and...
Page 25 - Making Basic Adjustments; Focusing and Zooming; Use the focus ring to sharpen the image.
Making Basic Adjustments 25 Making Basic Adjustments Follow the instructions in this chapter to make basic adjustments to the image shape, size, color, and quality. For further refinements, see “Making Detailed Adjustments” on page 34. Focusing and Zooming Use the focus ring to sharpen the image. Us...
Page 26 - Choosing the Aspect Ratio; is
26 Making Basic Adjustments Choosing the Aspect Ratio In many cases, video signals are automatically resized to fit on your screen when Auto is selected as the Aspect setting. You may need to change the size of the image (or aspect ratio) for certain image types by pressing the Aspect button on the ...
Page 27 - Viewing 3D images
Making Basic Adjustments 27 ■ Anamorphic Wide to display images that have a 2.40:1 aspect ratio (such as CinemaScope ® ) when using a commercially available anamorphic lens (available from Epson—see page 9). Note: If you use this setting without an anamorphic lens, the image fills the screen vertica...
Page 28 - Projecting in Split Screen mode
28 Making Basic Adjustments Projecting in Split Screen mode You can use the Split Screen feature to simultaneously project two images from different image sources next to each other. You can control the Split Screen feature using the remote control or the projector menus. The Split Screen feature is...
Page 29 - Choosing the Color Mode
Making Basic Adjustments 29 2. Press the Menu button. You see this screen: 3. To select an input source for the other image, select the Source setting, press Enter , select the input source, select Execute , and press Enter . (You can also change image sources, if necessary.) 4. To switch the images...
Page 30 - Advanced Color Adjustments
30 Making Basic Adjustments Select the image source you want to adjust, then press the Color Mode button on the remote control. Choose from these settings: ■ Cinema for viewing movies in a dimly lit room. ■ Dynamic for projecting the brightest picture available. ■ Living Room for watching television...
Page 31 - Adjusting the Gamma Setting
Making Basic Adjustments 31 Adjusting the Gamma Setting You can select from five gamma settings (2.0 to 2.4) or customize your own setting from your image or a displayed graph. Lower values will increase the contrast of dark areas, but tend to blur the bright areas. Higher values will darken the lig...
Page 32 - Adjusting RGBCMY; Locking the Projector
32 Making Basic Adjustments Adjusting RGBCMY Use this feature to adjust the hue, saturation, and brightness for each of the red (R), green (G), blue (B), cyan (C), magenta (M), and yellow (Y) color components. 1. Press the RBGCMY button. You see the following displayed on the screen: 2. Use the u or...
Page 34 - Using the Menu System
34 Making Detailed Adjustments Making Detailed Adjustments You can use the projector’s on-screen menus to make detailed adjustments to the image quality—such as the brightness, contrast, sharpness, and color. You can also change the menu display, sleep mode settings, and other projector features. Us...
Page 35 - Changing How the Menus Display
Making Detailed Adjustments 35 4. When you’re finished, press the Esc button to return to the previous menu or press the Menu button to exit the menu system. To display one of the line menus, press the Enter button. You see a display like this at the bottom of the image: ■ Press the l or r button to...
Page 36 - Adjusting the Picture Quality; Input Brightness Settings
36 Making Detailed Adjustments Adjusting the Picture Quality Before fine-tuning the image using these adjustments, make sure you have already selected the best Color Mode for your picture and viewing environment, as described on page 29. Then use the settings in this section to finish adjusting the ...
Page 38 - Sharpness and Picture Quality Settings
38 Making Detailed Adjustments Sharpness and Picture Quality Settings If the image looks fuzzy, or if it contains noise or flickering, you can use these settings to correct it. ■ Sharpness Use this function to make lines and edges appear more distinct in the image. This setting is stored separately ...
Page 39 - button; Color Settings; Adjusts the color intensity of the image.; Shifts the color balance between magenta and green.
Making Detailed Adjustments 39 ■ Noise Reduction Note: This is not be available with a signal input through the PC port. This setting reduces flickering of analog images. You can select from 3 levels of noise reduction. ■ Frame Interpolation This setting compares the current and previous frames, the...
Page 40 - to adjust darker shades and
40 Making Detailed Adjustments ■ Abs. Color Temp. Shifts the color balance between red and blue, making the image appear warmer or cooler. ■ Skin Tone Makes fine adjustments to the tint and controls the amount of red or green in the image. Also useful for correcting black-and-white images, if they l...
Page 41 - D Setup; D Display
Making Detailed Adjustments 41 ■ Gamma You can select from five gamma settings (2.0 to 2.4) or customize your own setting from your image or a displayed graph. Lower values will increase the contrast of dark areas, but tend to blur the bright areas. Higher values will darken the light areas. See pag...
Page 43 - Adjustments for Computer Images; Split Screen Setup; Screen Size
Making Detailed Adjustments 43 Adjustments for Computer Images In addition to the settings described previously, you can adjust the Tracking and Sync settings for analog RGB computer images. Normally, these settings are adjusted automatically by the projector. If you notice that the image is blurry ...
Page 44 - Swap Screens
44 Making Detailed Adjustments Note: Depending on the source and resolution of each input, the two screens may not appear to be of equal size when the Equal option is selected. ■ Source Select this option to open the Source menu and select which inputs should be displayed in split screen mode. The L...
Page 45 - Creating Memory Settings; Selecting Memory Settings
Making Detailed Adjustments 45 Selecting Memory Settings and Resetting the Projector Your projector comes with 10 memory locations where you can save customized settings to obtain the best picture quality for each of your video inputs. Creating Memory Settings Memory settings can be used to store mo...
Page 46 - Renaming Memory Settings
46 Making Detailed Adjustments Renaming Memory Settings You can rename memory settings so that they are easier for you to recognize. 1. Press the Memory button on the remote control. 2. Select Rename Memory . 3. Select the memory name you want to change, then press the Enter button. The name selecti...
Page 47 - Resetting the Projector
Making Detailed Adjustments 47 Resetting the Projector If the image quality isn’t what you expect, one or more settings may be adjusted improperly. If necessary, you can restore the projector to its factory-default (original) settings. To restore the settings in a specific menu (such as the Image or...
Page 48 - Customizing Projector Features; Image Sizing; button on the remote control. See page 26 for more information.
48 Making Detailed Adjustments Customizing Projector Features Use the settings in this section to adjust the image size and position, suppress on-screen text, and select basic setup options. Image Sizing Before adjusting any of these settings, make sure you have already selected an appropriate aspec...
Page 49 - Screen Options; button to temporarily stop projection.; Other Setup Options; You can select different options for projecting the image:
Making Detailed Adjustments 49 ■ Zoom Caption Pos. Lets you adjust the shape and position of the image so that subtitles are visible (available only if the Aspect setting has been set to Zoom ). Adjust Overscan before changing the zoom position. Screen Options ■ Messages Turn this setting off if you...
Page 51 - Adjusting the LCD Alignment
Making Detailed Adjustments 51 ■ High Altitude Mode Adjusts the speed of the fan so it can properly cool the projector at higher altitudes. Turn this setting on if you are using the projector at an altitude of 4921 feet (1500 meters) or higher. Note: The maximum operating altitude is 7500 feet (2286...
Page 54 - Using HDMI Link; Setting Up HDMI Link; and set it to
54 Using HDMI Link Using HDMI Link When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control them using the HDMI Link control buttons on the projector’s remote control. This lets you use just one remote control to operate many commonly used features on all your ...
Page 55 - Changing HDMI Link Settings
Using HDMI Link 55 4. Set up your connected devices so their HDMI CEC-compatible functions are enabled. For details, refer to the device manufacturer’s documentation. Changing HDMI Link Settings 1. Press the HDMI Link button on the projector’s remote control. 2. Select Device Connections . You see t...
Page 56 - Cleaning the Lens; Clean the lens whenever you notice dirt or dust on the surface.
56 Maintenance Maintenance Your projector needs little maintenance. All you need to do on a regular basis is keep the lens clean. You also may need to clean the air filter to prevent overheating. Warning: Before cleaning any part of the projector, turn it off and unplug the power cord. Never open an...
Page 57 - Cleaning the 3D Glasses
Maintenance 57 Caution: Never rub the lens with abrasive materials. Use only lens cleaning fluids that are designed for cleaning optics. Avoid touching the lens with your bare hands to prevent fingerprints on or damage to the lens surface. Cleaning the 3D Glasses Use the included lint-free cloth (do...
Page 58 - Cleaning the Projector Case; power button on the projector twice or the; button on the remote
58 Maintenance Cleaning the Projector Case Before you clean the case, turn off the projector and unplug the power cord. ■ To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth. ■ To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent. Then wipe t...
Page 59 - or five times to remove loose dust from the air filter.; Use a small vacuum cleaner that is designed for computers and
Maintenance 59 4. Remove the air filter as shown. 5. Gently tap both sides of the air filter against a hard surface four or five times to remove loose dust from the air filter. Note: Do not use excessive force when tapping the air filter, or it may crack and become unusable. Do not rinse the air fil...
Page 60 - on the inner edge of the cover to lock it into place, as shown below.; Replacing the Lamp; The projected image gets darker or starts to deteriorate.; appears on the screen when you start projecting.
60 Maintenance 8. Insert the outer edge of the air filter cover into the notches on the projector, then press in on the inner edge of the cover to lock it into place, as shown below. Replacing the Lamp The projection lamp lasts for up to 4000 hours in Normal mode. You can use the Info menu to check ...
Page 61 - Follow these steps to replace the lamp:; Wait about an hour to make sure the lamp is no longer hot.
Maintenance 61 Follow these steps to replace the lamp: 1. If the projector is on, press the P power button on the projector twice or the Standby button on the remote control and wait for the power light to stop flashing. 2. Turn off the power switch on the back of the projector and unplug the power ...
Page 63 - Resetting the Lamp Usage Timer; Checking the Projector Status
Maintenance 63 10. Tighten the lamp cover screw. 11. Reset the lamp usage timer, as described on page 63. Resetting the Lamp Usage Timer After replacing the lamp, plug the projector back in, turn on the power switch on the back of the projector, and press the P power button on the projector or the O...
Page 64 - Storing the Projector
64 Maintenance 2. Use the menu navigation buttons to open the Info menu. The following information appears: Note: The information displayed depends on the currently selected image source. The Lamp Hours shows 0H until you’ve used the lamp for at least 10 hours. The resolution indicates the total num...
Page 65 - Problem Solving; If the projector isn’t working correctly, first press the; Lights indicating normal operation
Problem Solving 65 Problem Solving This section explains how to interpret the projector’s status lights, solve problems with the picture and remote control, and contact technical support. What To Do When the Lights Come On or Flash The lights on top of the projector indicate the projector’s status a...
Page 66 - Lights indicating a problem
66 Problem Solving Power light flashes blue, power button is on The projector is warming up. Wait for the picture to appear. The projector is cooling down. Wait until the power light stops flashing and remains off. Then press the P power button on the projector or the On button on the remote control...
Page 67 - Solving Picture Problems; You cannot turn on the projector.
Problem Solving 67 Solving Picture Problems You cannot turn on the projector. ■ Make sure the power cord is connected and the power switch on the back of the projector is turned on. Then wait a moment for the P power button to light up before pressing the P power button on the projector or the On bu...
Page 68 - D content does not display or does not display correctly.
68 Problem Solving 3D content does not display or does not display correctly. ■ Press the 2D/3D button on the remote control to switch to 3D viewing mode, if necessary. ■ Make sure you are within the 3D viewing range (see page 11). ■ Check that your video device and media are both 3D-compatible. Ref...
Page 69 - The picture isn’t rectangular.
Problem Solving 69 ■ If the function key doesn’t let you display simultaneously on both screens, you might need to use the Display utility in the Windows Control Panel to make sure that both the LCD screen and external monitor port are enabled. From the Windows Control Panel, open the Display utilit...
Page 70 - The picture is blurry.
70 Problem Solving The picture is blurry. ■ Make sure the Input Signal is set correctly for your video equipment (see page 50). ■ There may be dirt on the lens. Clean the lens as described on page 56. ■ Adjust the focus (see page 25). ■ Make sure the lens is not fogged by condensation. If you’ve jus...
Page 71 - Solving Remote Control Problems; The projector doesn’t respond to remote control commands.
Problem Solving 71 Solving Remote Control Problems The projector doesn’t respond to remote control commands. ■ Make sure you’re within about 32 feet (10 m) of the projector, and the remote control is aimed at the projector’s front or back sensor within the ranges shown below. ■ You may need to repla...
Page 72 - Where to Get Help; Internet Support
72 Problem Solving Where to Get Help Internet Support Epson provides technical assistance 24 hours a day at epson.com/support (U.S.) or epson.ca/support (Canada). Here you can access troubleshooting information, download product documentation, and receive technical advice through email. Speak to a S...
Page 73 - Specifications; General
Specifications 73 Specifications General Type of display Poly-silicon TFT active matrix Size of LCD panels 0.74 inch (18.8 mm) wide Lens F=2.00 to 3.17 Resolution (native format) 1920 × 1080 pixels, 1080p Brightness Normal mode:White light output up to 2400 lumens (ISO 21118 standard)Color light out...
Page 75 - Safety; Compatible Video Formats
Specifications 75 Safety United States FCC Part 15B Class B (DoC)UL60950-1 2 nd edition Canada ICES-003 Class BCSA C22.2 No. 60950-1-07 Pixelworks DNX ™ ICs are used in this projector. Compatible Video Formats The projector supports analog video in NTSC, PAL, and SECAM formats, and it automatically ...
Page 76 - ESC/VP21 Command Codes
76 Specifications Analog RGB (computer display) HDMI 3D mode ESC/VP21 Command Codes You can use an AV controller with a 9-pin null modem serial cable to control the projector. You can download the complete ESC/VP 21 Communication Manual for home theater projectors from the EPSON website at epson.com...
Page 77 - Notices; Important Safety Information
Notices 77 Notices Important Safety Information Follow these safety instructions when setting up and using the projector: ■ Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. ■ If you or any viewe...
Page 79 - FCC Compliance Statement; For United States Users
Notices 79 ■ Allow the lamp to cool for one hour before replacing it. ■ Unplug the projector during lightning storms or when not in use for extended periods. ■ Don’t place the projector or remote control on top of heat-producing equipment. ■ If you use the projector in a country other than where you...
Page 80 - WARNING; Copyright Notice
80 Notices WARNING The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and...
Page 81 - Trademarks
Notices 81 Trademarks EPSON, PowerLite, and C 2 Fine are registered trademarks, 1080Perfect is a trademark, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark, DigiScan and AccuCinema are trademarks, and Extra Care is a service mar...
