Epson RR 70W - Manual
A user manual for the Epson RR-60 and RR-70W scanners covers essential setup and operation, including hardware connections like USB cables and battery management for wireless models. The guide highlights software installation–such as drivers and utilities–and basic scanning procedures, from loading documents to initiating scans via computer or mobile devices. It also addresses connectivity troubleshooting, particularly Wi-Fi setup, ensuring compatibility with 2.4 GHz networks and resolving common connection errors.
Table of Contents:
- Page 1 – Scanner Connection and Model Specific Instructions
- Page 2 – Software Installation and Document Scanning Procedure
- Page 3 – Multi-Platform Scanning and Wi-Fi Troubleshooting
- Page 4 – Software Support and Copyright Information
Connect the scanner to your computer with the USB cable.
Branchez le scanner à votre ordinateur avec un câble USB.
RR-70W users:
The battery light flashes and the battery begins charging
after you connect the USB cable. The battery is not fully
charged at the time of purchase. Before installing the
software, make sure the battery is fully charged. When
charging is complete, the battery level is shown as full .
If the scanner is off when charging completes, the battery
light turns off.
Utilisateurs du modèle RR-70W :
Le témoin de la pile clignote et le chargement de la pile
commence après le branchement du câble USB. La pile
n’est pas complètement chargée au moment de l’achat.
Avant l’installation du logiciel, assurez-vous que la pile
est complètement chargée. Lorsque le chargement est
terminé, l’indicateur affiche que la pile est pleine . Si le
scanner est éteint lorsque le chargement se termine, le
témoin de la pile s’éteint.
Note:
An internet connection is required to obtain the
product software.
Remarque :
Une connexion Internet est requise pour
obtenir le logiciel du produit.
Visit Epson’s support site listed below for your
model.
Visitez le site de soutien d’Epson indiqué ci-dessous
pour votre modèle.
•
RR-60 (U.S./É.-U.)
www.epson.com/support/rr60
RR-60 (Canada)
www.epson.ca/support/rr60
•
RR-70W (U.S./É.-U.)
www.epson.com/support/rr70w
RR-70W (Canada)
www.epson.ca/support/rr70w
Click
Download
for the Drivers and Utilities Combo
Package.
Cliquez sur
Télécharger
pour obtenir l’Ensemble des
pilotes et logiciels.
Double-click the file you downloaded to install the
software. Follow the on-screen instructions to set up
the connection.
Double-cliquez sur le fichier que vous avez
téléchargé pour installer le logiciel. Suivez les
instructions à l’écran pour établir la connexion.
Note:
The first time you run your Kofax/Nuance software,
you will need to enter the appropriate serial number
from the
Kofax/Nuance PDF Software Serial Number
sheet
included with your product.
Remarque :
La première fois que vous exécutez le logiciel
Kofax/Nuance, vous devrez entrer le numéro de série
approprié tel qu’indiqué sur la feuille
Numéro de série du
logiciel Kofax/Nuance PDF
incluse avec votre produit.
1
1
1
2
RR-60
RR-70W
IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online
User’s Guide
.
IMPORTANT : Avant d’utiliser ce produit, assurez-vous de lire
ces instructions et les instructions de sécurité dans le
Guide de
l’utilisateur
en ligne.
Start Here
Point de départ
Connect the USB cable
•
Branchez le câble USB
Install software
•
Installez le logiciel
Note:
The illustrations show the RR-60, but the steps are the
same for the RR-70W, unless otherwise specified.
Remarque :
Les illustrations montrent le modèle RR-60,
mais les étapes à suivre sont les mêmes pour le modèle
RR-70W, à moins d’indication contraire.
Note:
Keep in a safe place and
do not discard.
Remarque :
Conservez ce
document dans un lieu sûr et
ne le jetez pas.
RR-60
RR-70W
Cleaning sheet
Feuille de nettoyage
Calibration sheet
Feuille de calibrage
Check that the ready light is on to verify the scanner
is on.
Vérifiez si le témoin de préparation est allumé afin de
confirmer que le scanner est allumé.
Ready light
Témoin de préparation
RR-70W users:
If the ready light is off, slide the power switch to the
position.
Utilisateurs du modèle RR-70W :
Si le témoin de préparation est éteint, faites glisser
l’interrupteur en position
.
Load the document against the left edge of the input
slot, faceup and with the top edge first.
Chargez le document contre le bord gauche de
la fente d’alimentation, face vers le haut et bord
supérieur en premier.
Press the start button.
Appuyez sur le bouton de démarrage.
Epson® ScanSmart starts automatically and your
document is scanned.
Epson® ScanSmart démarre automatiquement et
votre document est numérisé.
1
Scan a document
•
Numérisez un document
Kofax
®
/Nuance
®
Software Serial Number sheet
Feuille Numéro de série du
logiciel Kofax
®
/Nuance
®
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Epson
- Model
- RR 70W
- Document type
- Manual
- Language(s)
- English, French
- Pages
- 4
- File size
- 897.2 KB
- Format
Other Manuals for Epson RR 70W
Summary
Instructions for connecting the scanner via USB and specific details regarding battery charging indicators for the RR-70W model.
Steps for installing necessary drivers and utilities, and procedures for scanning documents, including checking ready lights and initiating scans.
Instructions for scanning using mobile devices (iOS/Android) and computers (Windows/Mac), along with troubleshooting steps for Wi-Fi setup issues related to network compatibility and router resets.