Page 3 - PRECAUTIONS; WARNING; DANGER
EPSON Perfection 610 Rev. B PRECAUTIONS Precautionary notations throughout the text are categorized relative to 1)Personal injury and 2) damage to equipment. DANGER Signals a precaution which, if ignored, could result in serious or fatal personal injury. Great caution should be exercised in performi...
Page 4 - PREFACE; Provides a general overview and specifications of the product.
EPSON Perfection 610 Rev. B PREFACE This manual describes basic functions, theory of electrical and mechanical operations, maintenance and repair procedures of EPSON Perfection 610. The instructions and procedures included herein are intended for the experienced repair technicians, and attention sho...
Page 5 - Revision Status
EPSON Perfection 610 Rev. B Revision Status Revision Issued Date Description A June 16, 1999 First Release B August 2, 1999 Parts list and exploded digrams have been added to Appendix.
Page 6 - Contents
EPSON Perfection 610 Rev. B Contents Product Description Features ......................................................................................................... 8 Specifications ................................................................................................. 8 Interface S...
Page 7 - PRODUCT DESCRIPTION
Page 8 - Figure 1-1. Exterior View of the Perfection 610
EPSON Perfection 610 Revision B Product Description Features 8 1.1 Features The major features of the EPSON color image scanner Perfection 610 are as follows. Easy to use: USB I/F, Friendly user interface TWAINStart Button (Ease of use with Page Manager) High quality: Resolution: 600 dpi (Optical re...
Page 9 - ELECTRICAL SPECIFICATIONS
EPSON Perfection 610 Revision B Product Description Specifications 9 Number of hubs: This device must be in the Tier 1 or 2 with a recommended USB cable.(Tier 1: Host - this device, Tier 2: Host - Hub - this device) Light source: White cold cathode fluorescent lamp Option: None Operate switch: None ...
Page 10 - DOCUMENT
EPSON Perfection 610 Revision B Product Description Specifications 10 DOCUMENT Reflective type: Documents which has a smooth surface such as printing and photograph. DIMENSION Dimension: 287(W) x 425(D) x 88(H) mmRefer to Figure 1-2. Weight: 4.5 Kg Figure 1-2. Exterior Dimension of the Perfection 61...
Page 11 - Interface Specifications
EPSON Perfection 610 Revision B Product Description Interface Specifications 11 1.3 Interface Specifications This section provides specifications of the USB, the only interface supported by the Perfection 610. 1.3.1 USB Specifications Any items not included in this specification shall be in complian...
Page 12 - Lamp Descriptions; NOTE: The lamp goes off after 30 minutes.
EPSON Perfection 610 Revision B Product Description Control Codes 12 1.4 Control Codes The command level of this scanner is ESC/I-D1 . The commands supported are shown in the table below. Table 1-3. Control Codes 1.5 Lamp Descriptions Since this scanner does not have any LED indicator, it shows the ...
Page 13 - Error Indications; COMMAND ERROR
EPSON Perfection 610 Revision B Product Description Error Indications 13 1.6 Error Indications Refer to Section 1.5 for the error indications. COMMAND ERROR Cause: Undefined command is detected. Disposition: The scanner ignores a wrong command and parameter(s), so it keeps the current settings or de...
Page 14 - Manuscript Table
EPSON Perfection 610 Revision B Product Description Manuscript Table 14 1.7 Manuscript Table Dimension: 216 mm (Horizontal) x 297 mm (Vertical) 216 mm 3 ± 2 mm 297 mm Front 3 ± 2 mm Origin Point
Page 15 - C H A P T E R; OPERATING PRINCIPLES
Page 16 - Engine Mechanism
EPSON Perfection 610 Rev. B Operating Principles Engine Mechanism 16 2.1 Engine Mechanism This section explains the engine functions and operating principles of the EPSON Perfection 610. The engine mechanism has the two major parts; the carriage unit (=scanning head) and the carriage move mechanism....
Page 19 - Figure 2-5. Power Supply Circuit Block Diagram; T o t h e M a i n B o a r d
EPSON Perfection 610 Rev. B Operating Principles Engine Mechanism 19 Figure 2-5. Power Supply Circuit Block Diagram S m o o t h i n gC i r c u i t F u l l W a v eR e c t i f i e r C i r c u i t S m o o t h i n gC i r c u i t S w i t c h i n gC i r c u i t A C V o l t g e I n p u t F i l t e r C i r ...
Page 21 - TROUBLESHOOTING
Page 23 - Table 3-2. Problems and Corresponding Tables to Refer to
EPSON Perfection 610 Revision B Troubleshooting Troubleshooting 23 3.3 Troubleshooting This section describes how to troubleshoot problems according to exhibited phenomenons.See Table 3-2 that enables you to find the defective part to the unit level. Then refer to the corresponding table for checkpo...
Page 24 - Table 3-5. The carriage unit operates but the error is indicated.
EPSON Perfection 610 Revision B Troubleshooting Troubleshooting 24 Table 3-5. The carriage unit operates but the error is indicated. Cause Step Checkpoints Finding Remedy The CR home position sensor is defective. 1 Check the signal levels between the collector (+) and emitter (-) of PC1. The signal ...
Page 25 - ASSEMBLY AND DISASSEMBLY
Page 26 - F r o n t; E P S O N; I n s i d e
EPSON Perfection 610 Revision B Assembly and Disassembly Overview 26 4.1 Overview This chapter describes procedures for disassembling the EPSON Perfection 610. Unless otherwise specified, the scanner can be disassembled by reversing the disassembly procedures. 4.1.1 Precautions The directions used i...
Page 27 - Disassembly Procedures; the left side of the scanner body.
EPSON Perfection 610 Revision B Assembly and Disassembly Disassembly Procedures 27 4.2 Disassembly Procedures 4.2.1 Releasing the Carriage Lock 1. Using a standard screw driver, release the Carriage Lock located at the left side of the scanner body. Figure 4-2. Carriage Lock Location C A U T I O N W...
Page 28 - Holding the Document Cover by the edges, release the two hooks
EPSON Perfection 610 Revision B Assembly and Disassembly Disassembly Procedures 28 4.2.2 Document Cover Removal 1. Open the Document Cover. 2. Holding the Document Cover by the edges, release the two hooks by pushing the cover to the rear as shown in Figure 4-4. Figure 4-3. Document Cover Removal (1...
Page 29 - Lifting up the rear end of the Upper Housing, release the three; Figure 4-7. After Removing the Upper Housing
EPSON Perfection 610 Revision B Assembly and Disassembly Disassembly Procedures 29 4.2.3 Upper Housing Removal 1. Release the Carriage Lock. (See Section 4.2.1.) 2. Remove the Document Cover. (See Section 4.2.2.) 3. Remove the two screws (gold, CBS, M3x6) at the back of the scanner body. 4. Lifting ...
Page 30 - Using a standard screw driver, lift up the carriage cover in the
EPSON Perfection 610 Revision B Assembly and Disassembly Disassembly Procedures 30 4.2.4 Inverter Lamp / Inverter Board Removal 1. Release the Carriage Lock. (See Section 4.2.1.) 2. Remove the Document Cover. (See Section 4.2.2.) 3. Remove the Upper Housing. (See Section 4.2.3.) 4. Remove the two sc...
Page 31 - Remove the black screw and disconnect the 2-pin connector for the
EPSON Perfection 610 Revision B Assembly and Disassembly Disassembly Procedures 31 6. Disconnect the connector for the Inverter Lamp from the Inverter Board. 7. Remove the black screw and disconnect the 2-pin connector for the CCD sensor, and then remove the Inverter Board. 8. Remove the Inverter La...
Page 32 - Using a standard screw driver, remove the timing belt clamp
EPSON Perfection 610 Revision B Assembly and Disassembly Disassembly Procedures 32 4.2.5 Carriage Unit Removal 1. Release the Carriage Lock. (See Section 4.2.1.) 2. Remove the Document Cover. (See Section 4.2.2.) 3. Remove the Upper Housing. (See Section 4.2.3.) 4. Using a standard screw driver, rem...
Page 33 - Remove the hexagon nut at the rear end of the carriage guide shaft.
EPSON Perfection 610 Revision B Assembly and Disassembly Disassembly Procedures 33 5. Remove the hexagon nut at the rear end of the carriage guide shaft. 6. Remove the tension spring and the screw (gold, CBS, M3x4) securing the driven pulley assembly. Figure 4-13. Hexagon Nut Removal Figure 4-14. Dr...
Page 34 - Release the timing belt from the driven pulley.; Figure 4-18. Carriage Guide Shaft Removal
EPSON Perfection 610 Revision B Assembly and Disassembly Disassembly Procedures 34 7. Release the timing belt from the driven pulley. 8. Remove the driven pulley assembly by pushing it in the direction indicated with the arrow. (See Figure 4-17.) 9. Remove the CR shaft from the Carriage Unit. 7 . Fi...
Page 35 - Inserting a standard screw driver from the back, remove the FFC; Figure 4-19. FFC Metal Clamp and FFC Removal; Release the FFC (white) from the connector and the two guide tabs
EPSON Perfection 610 Revision B Assembly and Disassembly Disassembly Procedures 35 10. Inserting a standard screw driver from the back, remove the FFC metal clamp. Figure 4-19. FFC Metal Clamp and FFC Removal 11. Release the FFC (white) from the connector and the two guide tabs in the Carriage Unit,...
Page 36 - and then remove the FFC fixing plate.
EPSON Perfection 610 Revision B Assembly and Disassembly Disassembly Procedures 36 4.2.6 Carriage Motor / Timing Belt Removal 1. Release the Carriage Lock. (See Section 4.2.1.) 2. Remove the Document Cover. (See Section 4.2.2.) 3. Remove the Upper Housing. (See Section 4.2.3.) 4. Remove the Carriage...
Page 37 - Follow the steps below to remove the Timing Belt from the CR Motor
EPSON Perfection 610 Revision B Assembly and Disassembly Disassembly Procedures 37 9. Follow the steps below to remove the Timing Belt from the CR Motor Unit. 1) Remove the E-ring. 2) Remove the transmission gear. 3) Disengage the timing belt from the drive pulley. Figure 4-24. Timing Belt Removal F...
Page 38 - Slide the Carriage Unit slowly until you see the whole main board
EPSON Perfection 610 Revision B Assembly and Disassembly Disassembly Procedures 38 4.2.7 Main Board Removal 1. Release the Carriage Lock. (See Section 4.2.1.) 2. Remove the Document Cover. (See Section 4.2.2.) 3. Remove the Upper Housing. (See Section 4.2.3.) 4. Slide the Carriage Unit slowly until ...
Page 40 - Disconnect the locking connector (pull and release) for the Panel
EPSON Perfection 610 Revision B Assembly and Disassembly Disassembly Procedures 40 4.2.8 Panel Board Removal 1. Release the Carriage Lock. (See Section 4.2.1.) 2. Remove the Document Cover. (See Section 4.2.2.) 3. Remove the Upper Housing. (See Section 4.2.3.) 4. Remove the screw (gold, CBS, M3x4). ...
Page 41 - Release the locking connector (pull and release) for the Panel; Figure 4-31. Connectors for the Power Supply Board
EPSON Perfection 610 Revision B Assembly and Disassembly Disassembly Procedures 41 4.2.9 Power Supply Board Removal 1. Release the Carriage Lock. (See Section 4.2.1.) 2. Remove the Document Cover. (See Section 4.2.2.) 3. Remove the Upper Housing. (See Section 4.2.3.) 4. Release the locking connector...
Page 42 - plate, and then remove it toward the inside.
EPSON Perfection 610 Revision B Assembly and Disassembly Disassembly Procedures 42 6. Remove the two screws (gold, CBS, M3x4) securing the shield plate, and then remove it toward the inside. 7. Disconnect the cable from the locking connector (push and release), remove the five screws (gold, CBS, M3x...
Page 43 - ADJUSTMENT
Page 45 - MAINTENANCE
Page 47 - APPENDIX
Page 48 - Following figures shows interconnection of the scanner.; B 1 0 3 M A I N B o a r d; P o w e r S u p p l y B o a r d
EPSON Perfection 610 Rev. B Appendix Overview 48 7.1 Overview This section provides useful information for servicing this scanner. 7.1.1 Interconnection Following figures shows interconnection of the scanner. Figure 7-1. Interconnection (USB) 7.1.2 Connector Assignment Table 7-1. Connector Summary- ...
Page 50 - Parts List and Explode Diagrams
EPSON Perfection 610 Rev. B Appendix Parts List and Explode Diagrams 50 7.2 Parts List and Explode Diagrams Table 7-9. Parts List Ref. # Description Ref. # Description Ref. # Description 100 FRAME,BASE 122 LOGO PLATE;E 146 MOTOR ASSY.,CR 101 HOUSING ASSY.,UPPER;ASP 123 EXTENSION SPRING,18.4 147 C.B....