Epson LS500 - Installation Manual
Epson LS500 – Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Placing the Furniture; Place the jig with the; labels facing down, then fold one of the larger flaps and its tab up.
- Page 3 – Insert the tab into the notch.; Placing the Projector; Place the projector on top of your furniture.
- Page 4 – Remove the projector’s lens cap and front cover.; Projecting the Wall Bracket Guide; Visit; file for your screen size.
- Page 6 – Top screw; Top screw
- Page 7 – Assembling the Screen; Assembling the Frame; Spread out the included transparent sheet on the floor.; Insert the brackets into the shorter frame pieces.
- Page 8 – Insert four of the supplied M5 × 8 mm screws in each corner.; Testing the Frame Position; Remove the jig from the front of the projector.; Attaching the Screen Material
- Page 9 – Fold the screen material over the frame to check the alignment.
- Page 10 – Insert two of the supplied M5 × 15 mm screws in each corner.
- Page 11 – Mounting the Screen
- Page 12 – Making Final Adjustments; User’s Guide; Installing the Streaming Device
- Page 13 – Remove the projector’s storage space cover.
- Page 14 – Setting Up Android TV; Turn the projector on.
Epson
®
EpiqVision™ Ultra LS500
Laser Projection TV Installation Guide
IMPORTANT:
Before using this product, make sure you read these instructions and the safety instructions in the
ELPSC35/ELPSC36 Safety Guide
and online
User’s Guide
. Visit
www.epson.com/support/LS500
(U.S.) or
www.epson.ca/support/LS500
(Canada) to view online guides.
Required Supplies
Before you begin, make sure you have the following items:
■
Level
Note:
We recommend a bubble level for leveling the furniture and projector, and a laser level for leveling the screen.
■
Tape measure
■
Electric drill
■
Wall bracket mounting screws
Note:
You will need 8 screws to attach the supplied wall brackets. Use screws that are appropriate for the wall on which you will mount
the screen.
■
Pencil
■
Computer with an HDMI output and an Internet connection
■
HDMI cable
■
Stud finder (if your installation location requires attaching to studs)
Note:
We recommend that you use painter’s tape to avoid scratching your wall during installation. See “Mounting the Screen” for details.
Box Contents
Your Epson EpiqVision Ultra LS500 Laser Projection TV box contains the following items:
■
Epson LS500 projector
■
Epson ELPSC35 100" or ELPSC36 120" screen
■
Cardboard jig for projector positioning
■
2 pairs of white gloves for carrying and mounting the screen
Video
Visit
www.epson.com/support/LS500
(U.S.) or
www.epson.ca/support/LS500
(Canada) to view the supplemental installation
video.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Epson LS500
Summary
2 Placing the Furniture Placing the Furniture Before proceeding with the installation, move the furniture you will place the projector on to its final location. This will give the furniture time to settle into the floor as needed, which is especially important for softer surfaces like carpets and ru...
Placing the Projector 3 3. Insert the tab into the notch. 4. Repeat the process on the other side of the jig to complete the assembly. Placing the Projector 1. Place the projector on top of your furniture. 2. Place the jig against the wall, aligning the center of the jig with the expected center of ...
4 Projecting the Wall Bracket Guide 4. Connect the power cable to the projector and an HDMI cable to the projector’s HDMI1 port. Note: Don’t plug the projector in or connect the other end of the HDMI cable yet. 5. Remove the projector’s lens cap and front cover. 6. Align the projector’s center with ...
