Epson EH-TW3200- Manual

3 Table of Contents Ba si c o p er ati o n Appen d ix T roub les hoot in g Ima g e Qu alit y Adju st ment s Ins ta lli ng t h e pr o je c to r Conf ig urat ion Men u Troubleshooting ■ Problem Solving ........................................ 37 Reading the indicators ....................................

4 Features of the Projector "x.v.Color" mode realizes more natural color reproduction Image appearance can be selected to match the projection environment (Color Mode) The optimum images for the location can be projected simply by selecting the desired color mode from the following five pres...

6 Part Names and Functions Front / Top Control panel Buttons with no explanation function in the same way as the corresponding buttons on the remotecontrol. Refer to "Remote control" for further details on these buttons. • Front adjustable feet p.17 Extend to adjust the projection angle so t...

8 Part Names and Functions Rear Base • [Trigger out] port Outputs a 12-volt DC signal when the projector is turned on.It is used to transmit the power status of this projector (on/off) to external equipment such as a motorized screen. • [Video] input port p.12 Connects to the Composite Video output ...

9 Appearance Center of lens * Distance from center of lens to suspension bracket fixing point Units: mm Center of lens 450 131 148.3 4.5 12.3 134.7 5-M4 × 9 389.7 150 136 160 45 75 300 56 72 *

10 Setting up Adjusting the projection size A* B* 90 ° Screen size Center of lens Screen Adjusting the projection size Lens shift adjustment When the projector is further away from the screen, the projection image size are larger.While referring to the table below, position the projector so that the...

11 Setting up Install ing the Pr ojector Projection methods * When suspending the projector from a ceiling, change the configuration menu settings. p.34 When projecting from a ceiling * If you place the projector off to the side, aim it straight ahead (rather than at the center of the screen), then ...

12 Connecting Image Sources • Turn the power off for both the projector and the signal source before connecting them. If the power for either device is on at the time of connection, damage may result. • Check the shapes of the cable connectors and the device ports before making the connections. If y...

13 Install ing the Pr ojector Preparing the Remote Control Inserting batteries into the remote control Using the remote control If delays in the responsiveness of the remote control occur or if it does not operateafter it has been used for some time, it probably means that the batteries arebecoming ...

14 Starting and Stopping Projection Turning the power on and projecting images TIP If you set the "Direct Power On" to "On", the power of the unit will turn on when the main power switch is turned on, without having to press the power button of the remote control or the projector's c...

15 Starting and Stopping Projection Basic Operations When the expected images are not projected Turning the power off When the expected images are not projected Turning the power off Simply pressing or does not stop electricity consumption. If more than one signal source has been connected, or if no...

16 Adjusting the Projection Screen Focus adjustment Projection size adjustment (Zoom adjustment) Projection image position adjustment (Lens shift) If the projector cannot be set up directly in front of the screen, you can use the lens shift function to move the position of the projected images verti...

17 Adjusting the Projection Screen Basic Operations Adjusting the tilt of the projector Displaying a test pattern Adjusting the tilt of the projector Displaying a test pattern Extend Extend Retract Retract When an image from the projector that is placed on a flat surface is tilting horizontally ( ),...

18 Basic Image Quality Adjustments Selecting the color mode Selecting the aspect *If you press , the Select menu disappears. If you project an image that is compressed, enlarged or separated using the aspect function in public places such as a store or hotel for the purposes of profit-making or publ...

19 Basic Image Quality Adjustments Ima g e Quality Adjustments Normal Full Zoom Wide Living Room Natural Cinema Dynamic : Ideal for watching movies and concerts in a dark room. When the mode is selected, the EPSON cinema filter is automatically applied and the original colors of the image source are...

20 Advanced Color Adjustments You can select "Sharpness" or "Advanced" in the "Image" menu to adjust the images according to your own preferences. The adjustment screens for "Gamma" and "RGBCMY" can be displayed on the screen directly by pressing the correspon...

21 Advanced Color Adjustments Ima g e Quality Adjustments Customized ("Adjust it from the image") Customized ("Adjust it from the graph") Use or to move the gamma icon to the place where you want to adjust the brightness, and press or to confirm the selection. The place selected and ...

22 Advanced Color Adjustments RGB adjustment (Offset, Gain) RGB adjustment (Offset, Gain) RGB adjustment (Offset, Gain) Press and then select "Image" - "Advanced" - "RGB" in that order and confirm the selection. Use or (UP or DOWN) to select an item, and then use or (LEFT or ...

23 Ima g e Quality Adjustments Examining Image Quality Further In addition to color adjustments, adjustments to advanced sharpness and the amount of light from the lamp can also be made to match the image in search of the best picture. Sharpness (Advanced) adjustment Auto Iris (automatic aperture) s...

24 Viewing Images at a Preset Image Quality (Memory Function) After using a subset of "Signal" and "Image" in the configuration menu to adjust the projected images, the adjusted values can then be saved (Save Memory).In addition, the saved data can be retrieved easily, so that you ca...

25 Viewing Images at a Preset Image Quality (Memory Function) Ima g e Quality Adjustments Erase Memory Renaming Memory TIP Adjust each of the settings to the values to be saved. Press , and select "Save Memory". The Save Memory screen is displayed. Select the memory name to register the adju...

26 Configuration Menu Functions The configuration menus can be used to make a variety of adjustments and settings involving image quality and input signals. The following two types of menu are available. For details on the operation method, refer to "Using the configuration menus" in the nex...

27 Configuration Menu Functions Configuration Men u Changing settings Example: If you press when an item with next to it is selected, the selection screen for that item will be displayed. To return to a previous display, press . When setting is complete Press . Use or to adjust values. Use or to sel...

28 Configuration Menu Functions List of configuration menus When no image signals are being input, the "Image" menu and the "Signal" menu cannot be adjusted.Also, the items displayed in the "Image" menu, the "Signal" menu and the "Info" menu will varydepending...

32 Configuration Menu Functions (Setting is not possible when signals are being input from the [HDMI1] /[HDMI2] input port.)When part of the image is clipped, move the image display position vertically and horizontally so that theentire image is projected. Press , , and to adjust the position. (This...

35 Configuration Menu Functions Configuration Men u Sets the signal format in accordance with the video equipment that is connected to the [Video] or [S-Video] input port. If set to "Auto", the video signal format is set automatically.If there is a lot of interference in the image, or if a p...

37 T roub les hoot ing Problem Solving Reading the indicators The projector indicates its status using the indicators. (the icon and the around the button) and (the icon) light and flash, and lights and flashes in red according to the current status.The following tables show what the indicators mean...

38 Problem Solving Indicator statuses in normal operation During normal operation, the indicator is off. : Lit : Flashing Lamp replacement warning It is time to replace the lamp. Replace the lamp with a new one as soon as possible. p.50 If you continue to use the projector without replacing the lamp...

39 Problem Solving T roub les hoot ing When the indicators provide no help If any of the following problems occur and the indicators do not offer a solution, refer to the pagesgiven for each problem. Problems relating to images ■ No images appear ● No images appear p.39 Projection does not start, th...

43 Problem Solving T roub les hoot ing ■ Images appear dark ■ Projection stops automatically Problems when projection starts ■ Power does not turn on Have the color intensity and tint been adjusted correctly? Use the "Color Saturation" and "Tint" menu commands to adjust the color and...

44 Problem Solving Problems with the remote control ■ The remote control does not work Is the remote control light-emitting area facing towards the remote control light-receiving area when it is operated? Face the remote control towards the remote control light-receiving area.Operating range p.13 Is...

45 Appendix Maintenance This section describes maintenance tasks such as cleaning the projector and replacing consumable parts. Cleaning You should clean the projector if it becomes dirty or if the quality of projected images starts todeteriorate. Cleaning the air filter If the air filter becomes bl...

46 Maintenance Use a vacuum cleaner to remove any remaining dust from the surface of the air filter. Install the air filter. Install the air filter cover. Cleaning the projector case Clean the projector case by wiping it gently with a softcloth.If the projector is particularly dirty, moisten the clo...

47 Maintenance Appendix Consumable replacement periods Air filter replacement period • If the air filter has been broken or the "Replace" message is displayed even though the air filter has been cleaned. Replacing the air filter p.48 Lamp replacement period • The message "Replace the lam...

48 Maintenance Replacing consumables Replacing the air filter Replacing the lamp Resetting the lamp operating time Press the knobs to release the catches, and then pull the cover upward. Press or to turn off the power, and then turn the main power switch OFF. Remove the air filter cover. Dispose of ...

50 Optional Accessories/Consumables The following optional accessories/consumables are available for purchase if required. This list of optional accessories/consumables is current as of: 2010.7. Details of accessories are subject to change without notice. Varies depending on country of purchase. ■ O...

51 Appendix List of Supported Monitor Displays Component Video Composite Video /S-Video Signal Refresh rate (Hz) Resolution (Dots) SDTV (480i) 60 720 × 480 SDTV(576i) 50 720 × 576 SDTV(480p) 60 720 × 480 SDTV(576p) 50 720 × 576 HDTV   (720p) 50/60 1280 × 720 HDTV(1080i) 50/60 1920 × 1080 HDTV(1080p)...

53 Appendix Specifications * You can connect any HDMI or DVI-D compatible equipment. However, depending on the equipment, the projector may not project any image. Product name EH-TW3600 EH-TW3200 Dimensions 450 (W) × 136 (H) × 360 (D) mm (not including feet) Panel size 0.74 inch wide Display method ...

54 Specifications This product is also designed for IT power distribution system with phase-to-phase voltage 230V. ■ Angle of tilt If you set the projector higher than 8 º , it could damage the projector and cause an accident. ■ RS-232C cable layout • Connector shape : D-Sub 9-pin (male) • Projector...

55 Specifications Appendix We: EPSON AMERICA, INC. Located at: 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 Tel: 562-290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product ma...

56 Glossary Following is an explanation of some of the terms used in this guide which may be unfamiliar or which were not explained in the manual itself. Further information can be obtained by referring to other commercially-available publications. Aspect Ratio The ratio between an image's length an...

58 Index 2-2 Pull-down .................................................... 28 , 32 Abs. Color Temp. ............................................... 28 , 30 Advanced .......................................................... 28 , 30 Air filter ...........................................................