Epson Dreamio EH-DM2- User Manual

3 Follow these safety instructions when setting up and using the projector : • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in ...

6 Class 1 LASER Product Do not open the top cover. There are no user serviceable parts inside the unit. Do not use the unit in places where there are lots of humidity or dust, near cooking or heating appliances, or in places where it may come into contact with smoke or steam. Do not use or store thi...

8 Take note of the following advice in order to prevent malfunction and damage. • Be sure to observe the operating temperatures and storage temperatures given in this guide when using and storing the projector. • Do not set up the unit in places where it might be subjected to vibration or shock. • D...

10 Readable disc types The following discs can be played. • The performance and tonal quality of copy- control CD discs that do not conform to the compact disc (CD) standard cannot be guaranteed with this unit. CDs that conform to the CD standard will bear the following compact disc logo mark. Check...

12 Parts Name and Functions Name Function A Slide lens cover Close the lens cover to protect the lens when the unit is not in use. You can stop the projection completely by closing the lens cover during projection. However, if this state continues for 30 minutes, the unit lamp is turned off automati...

13 Name Function A Computer input port Can be connected to the RGB output port of a computer. s p. 44 B Component input port Can be connected to the component (YCbCr or YPbPr) output port of a video device. s p. 44 C Video input port Can be connected to the ordinary image output port of a video devi...

14 Name Function A Focusing ring Move to the left or right for image focusing. s p. 20 B Status indicator If a problem occurs in the unit, the status indicator blinks or lights up to indicate the problem. s p. 58 C Lamp cover When replacing the lamp, open this cover and replace the lamp. s p. 66 D L...

15 Name Function A Remote control light- emitting area Emits remote control signals. s p. 16 B Turns power supply to the unit on or off. s p. 22 C Corrects keystone distortion of the screen image to square or rectangular. s p. 21 D Displays or closes the projection adjustment and checkout menu. s p....

16 At the time of purchase, the batteries are not installed into the remote control. Insert the batteries provided with this unit, before use. A Push in the catch on the rear of the remote control, then lift it upwards. B Insert the batteries observing correct polarity. C Close the battery cover. Pr...

17 Quic k Star t Quick Start Playback procedure No complicated connections are necessary. You do not even need to select the television type or change the input. You can enjoy your DVDs on the big screen by following these four easy steps. The standard speakers support Dolby Virtual Speaker, and you...

18 A Place the unit in a position that will enable the optimum size image to be projected on the screen. When you use a 16:9 ratio, 80” type widescreen, for example, place the unit approximately 237 cm away from the screen. The further this unit is moved away from the screen, the larger the projecte...

19 Quic k Star t A Insert the disc into its slot by facing the disc label upward. If you are using a dual-side disc, face the side you wish to play downwards. Insert an 8-cm disc into the disc slot center position. A short beep sounds and the power comes on. Inserting the disc makes the Disc indicat...

20 Adjust the volume and image being projected. Adjusting the projection position and volume Fine-tuning the projection size (Zoom button) Focusing (Focus ring) Volume control (Volume) To increase the size, press the “W” side. To decrease the size, press the “T” side. Using the main unit Using the r...

22 Press . After stopping, when you press , playback is resumed from the interrupted scene (resume). A When you have played back a disc, press to eject the disc from its slot. • Once you have pressed , if you want to play back the ejected disc again, you cannot push it back into the disc slot manual...

23 Quic k Star t From here on, operations are explained primarily using the buttons of the remote control. You can also use the buttons with the same markings as those on the unit control panel to achieve the same effect. Press during playback. • Press on the operation panel. The play is paused and ...

24 Press or during playback or when paused. If you press once during chapter/track playback, playback returns to the start of the chapter or track being played. After this, playback returns to the start of the previous chapter/track each time you press . After this, playback returns to the start of ...

25 Quic k Star t The break function is useful if, in the middle of a movie, you want to get up or move around, get a drink, or some food, and so on. By simply pressing the button you can pause the disc being played until you can get up to turn the lights on in the room. Press during playback. • The ...

26 Advanced Operations Some discs have the following kinds of original menus saved in them. • Root Menu: When multiple titles (image and audio) have been recorded, this integrated disc information is displayed. • Menu: Title-specific playback data (chapter, angle, audio, and subtitle menus) is displ...

27 Adv anced Oper ations 3 Press . You can play a disc by selecting the desired chapter from any of the following two menus. • PBC (Playback control) function: If a Video CD with “PBC (playback control) enabled” specified on the disc or jacket is inserted into the disc slot, a menu screen is display...

28 If you select “Others” from the settings menu and set “PBC” to “Off”, the disc is played directly without displaying the menu screen. PBC is “On” by default. s p. 52 To play using the Preview function 1 If you press while a video CD is playing, the following Preview menu is displayed. • You can a...

29 Adv anced Oper ations 3 Select the track you want to see using , and press . The selected track is played. Although the , or files stored in a disc and a USB storage device are played back by selecting the desired file from a File List, the function varies depending on the file, as follows. • If ...

31 Adv anced Oper ations When playing MP3/WMA audio Once menu selection is complete and the audio begins, close the lens cover. The projection lamp turns off and you can enjoy just the music being played. Open the lens cover to turn the lamp back on. Simultaneous MP3/WMA and JPEG playback If a disc ...

32 During playback or when paused, select the chapter or track number you wish to play by pressing the numeric buttons. s “When using the numeric buttons” p. 26 Depending on the type of disc, you can loop playback within a range of titles, chapters, or tracks, as in the table below. Press during pla...

34 You can set titles, chapters, and tracks to playback in your order of preference. 1 Press during play or when paused. The program screen will appear for you to set a playback sequence. 2 Using the numeric keys, enter title and track/chapter numbers sequentially. s “When using the numeric buttons”...

35 Adv anced Oper ations You can zoom (enlarge or compress) the projection image on the unit screen. If the enlarged image exceeds the screen size, you can display it by panning. 1 Press during playback. The magnification (or zoom rate) is displayed. 2 Select the desired magnification by pressing re...

36 When a disc has been recorded with multiple audio signals or languages, you can switch to the available audio signal or language of your preference. 1 Press during playback. The current audio settings are displayed on the screen. 2 Select the desired settings by pressing repeatedly. You can choos...

37 Adv anced Oper ations For discs that have been recorded with multiple camera angles, you can switch from the main angle to a different camera angle of your preference, such as from above, or from the right, during playback. 1 Press during playback. The current angle is displayed on the screen. 2 ...

38 2 Pressing , position the pointer on the desired item and press . • You can set the title/chapter/track number and time by using the numeric keys, and set the play start time. s p. 26 • When the selected item appears, select the desired value using and press . • Press once and the playback inform...

39 Adv anced Oper ations When the time you set on the sleep timer has passed, the unit power switch is turned off automatically. You can prevent unnecessary power from being consumed if you fall asleep while watching a movie. If the sleep timer is set to “Sleep Off” and if play is stopped or finishe...

40 The unit automatically recognizes the aspect suitable for the input signal, and the image is projected in the appropriate aspect. If you want to change the aspect yourself, or if the aspect is not correct, you can change it in the following way. Press . • Each time you press the aspect ratio name...

41 Adv anced Oper ations When projecting component video (SDTV), composite video images When projecting component video (HDTV) images When projecting computer images Wide panel computer images are always projected at the normal (wide screen) setting. If wide panel computer images are not projected i...

42 You can attach a USB memory or multicard reader that conform to the USB 1.1 to the unit and play the following format files. • MP3/WMA files • JPEG files • DivX ® files The file playback and your operations during play are the same as when you play files of a using the standard DVD player. Playba...

43 Adv anced Oper ations Aside from the built-in DVD player, this unit can project images by connecting to a computer or the following devices with a video output port. - Video recorder - Game machine - Video device with built-in TV tuner - Video camera and others Connecting with a video cable Video...

45 Adv anced Oper ations 1 Open the lens cover and press . 2 When you press , the following menu appears on the screen. The orange pointer points to the currently selected source. Select the desired source by pressing , and press . 3 Turn the device power switch on, and press the [Play] or [Playback...

46 When a computer image is not projected You can switch the image signal destination from the computer by holding down and pressing (the key is usually labeled or ). s Computer “Documentation” After switching, wait a few seconds for projection to start. Depending on the computer, each time the key ...

47 Adv anced Oper ations Connecting commercially available headphones. Audio Settings Caution • When listening with headphones, make sure the volume is not too high. You may damage your hearing when listening to sounds at high volume over an extended period of time. • Do not set the volume too high ...

48 You can connect to AV amplifiers and so on or equipment capable of making digital recordings when they are equipped with a coaxial digital audio input port. When connecting, use a commercially available coaxial digital cable. When you turn the Dolby Virtual Speaker function on, you can enjoy real...

49 Adv anced Oper ations 2 Select the desired settings by pressing repeatedly. When using the headphone the sound mode automatically changes to the Stereo mode as the Dolby Virtual Speaker mode is not applicable on headphone output. Sound mode will automatically toggle to the previous mode when the ...

50 Settings and Adjustments The settings of this unit can be adjusted to suit the environment in which it is used. 1 Press during playback or when stopped. The following setup menu is displayed. 2 Press and select the desired icon. Setup Menu Operation and Functions Using the setup menu Language set...

51 Settings and Adjustments 3 Press to select the item to be set, and then press . The settings are displayed on the right. 4 Select the setting you wish to change, and press . To display other setting pages, select a desired icon by repeatedly pressing . 5 After setup is complete, press to close th...

53 Settings and Adjustments Abkhazian 6566 Gaelic; Scottish Gaelic 7168 Magyar 7285 Sinhalese 8373 Afar 6565 Gallegan 7176 Malayalam 7776 Slovensky 8373 Afrikaans 6570 Georgian 7565 Maltese 7784 Slovenian 8376 Amharic 6577 Gikuyu; Kikuyu 7573 Manx 7186 Somali 8379 Arabic 6582 Guarani 7178 Maori 7773...

54 Playback Disc “Digital Output” Settings Stream PCM Linear PCM DVD video Linear PCM Stereo DTS DVD video DTS bit stream 48 kHz, 16 bit linear PCM Dolby digital DVD video Dolby digital bit stream 48 kHz, 16 bit stereo linear PCM Audio CD, Video CD, SVCD 44.1 kHz, 16 bit stereo linear PCM/48 kHz, 16...

55 Settings and Adjustments You can adjust the brightness, contrast, and other values of the projected image. 1 Press during projection. The following menu is displayed. 2 Press to select the item to be set, and then press . 3 Press to select the item to be set, and then press to adjust. • When opti...

56 Image page Option page Setting Item Setting Contents Brightness Adjusts the image brightness. Contrast Adjusts the difference between light and shade in the images. Color Saturation Adjusts the color saturation for the images. (This is not displayed when a computer is connected.) Tint Adjusts the...

57 Settings and Adjustments Info page Item Contents Information Displays the current status. Lamp Hours: Total usage time of the lamp. 0H is displayed for 0 to 10 hours. Changes to units of 1 hour at 10 hours and above. The display turns yellow text when it is time to change the lamp. Source: Displa...

58 Appendix You can check the status of this unit using the indicators on the top panel. Check each condition in the following table and follow the steps to remedy the problem. * If all indicators are not lit, the power cable is not connected correctly or the unit is not powered. Troubleshooting Whe...

59 Appendix When lights on red Error : lit : flashing : off Internal failure Wait for approximately 1 minute and 30 seconds. Then, disconnect and reconnect the power cable. If the indicator status does not change when is pressed and the power turned on... Fan related error/Sensor error High temperat...

61 Appendix If this unit is not functioning normally, check the following notes before requesting repairs. However, if the unit fails to improve, contact your dealer for advice. At these times Check here Reference page Power does not turn on • Did you press ? s p. 18 • Disconnect and reconnect the p...

62 When using external video or computer mode At these times Check here Reference page No images appear • Is the power for the connected equipment turned on? Switch on the power to the connected equipment, or start playback depending on the playback method for the connected equipment. s p. 45 “Signa...

63 Appendix This section describes maintenance tasks such as cleaning the unit and replacing consumable parts. Cleaning the air filter and air intake vent When dust builds up on the air filter or the air intake vent, or the message “The unit is overheating. Make sure nothing is blocking the air vent...

64 Air filter replacement period When the air filter gets dirty or is broken Lamp replacement period • The message “Replace the lamp” appears on the screen when projection starts. • The projected image gets darker or starts to deteriorate. The following optional accessories and consumables are avail...

65 Appendix Replacing the air filter 1 Turn the power switch off and when a short beep sounds, unplug the power cable. 2 Remove the air filter cover. 3 Take out the old air filter. 4 Install the new air filter. 5 Install the filter cover. Dispose of used air filters properly in accordance with your ...

66 Replacing the lamp 1 Turn the power switch off, and when a short beep sounds, unplug the power cable. 2 Loosen the screws of the lamp cover attachment using the screwdriver that supplied with the replacement lamp. Slide the lamp cover horizontally, and then lift it up to remove it. 3 Loosen the l...

67 Appendix 6 Tighten the lamp attachment screws firmly. 7 Install the lamp cover. Resetting the lamp operating time After the lamp has been replaced, make sure you initialize the Lamp Hours setting. The unit has a built-in counter that keeps track of the lamp operating time and the lamp replacement...

69 Appendix Refer to the following table and place the unit in a position which allows the best possible projection for the size of the screen. Units: cm (ft.) Units: cm (ft.) Projection Distance and Screen Size 16:9 Screen Size Projection Distance Minimum Maximum (Zoom Adjustment Wide) - (Zoom Adju...

70 Composite video Units: Dots * Letterbox signal Component video Units: Dots * Letterbox signal Computer image Units: Dots * 1 You cannot connect to models where the VGA output port is not installed. * 2 Letterbox signals Even when signals other than those mentioned above are input, it is likely th...

71 Appendix The file format must meet the following requirements • Resolution: up to 720 x 576 • GMC (global motion compensation) point: Up to one • Bit rate: CD: 5.6 Mbps DVD: 19Mbps USB: 5.57 Mbps (However, this may be slower depending on the performance of the USB storage.) Compatible MPEG format...

72 * The USB ports may not accept all USB-compatible devices. Pixelworks DNX TM IC is installed in this unit. Specifications Product name EH-DM2 Dimensions 320W x 135H x 230D mm (Including projections) Panel size 0.55” wide Display method Polysilicon TFT active matrix Resolution 409, 920 pixels (854...

74 HDTV An abbreviated form of “High-Definition Television system” to be applied to a high-definition TV set that can satisfy the following requirements: -Vertical resolution 720p or 1080i or higher (where, “p” refers to progressive scan, and “i” refers to interlace scan)-16:9 screen aspect ratio JP...

75 A Audio page ................................................................................ 52Auto Setup ................................................................................ 62 B Break ......................................................................................... 25Bright...

76 Inquiries < EUROPE, MIDDLE EAST & AFRICA > This address list is current as of the 5th of April, 2007. A more up-to-date contact address can be obtained from the corresponding website listed here. If you do not find what you need on any of these pages, please visit the main Epson home pa...

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed...