Epson CX7300- Manual
Epson CX7300– Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Step 5: Install CIS Catridges; Step 6: Fix the Support Arm and Tube line; If the switch is turned to down palce, then CISS
- Page 5 – Step 9: Check the nozzle
- Page 6 – Attention for Maintenance:; level with the printer.
Instruction for EPSON CX7300
You are welcomed to use continue Ink Supply System which will greatly reduce your cost. And
it is the ideal products suiting for Color Inkjet Printer. Pls Please look over the instruction
carefully before using it, which will make you use this system easily, safely and stably.
1. General Guide
1
、
Components
a
、
CIS System 1set b
、
Air Filters 6pcs c
、
Support Arm 1set
d
、
Standby Refill Kit 6pcs e
、
Instruction CD 1pc
2
、
Opening box inspection
a
、
Check whether all the accessories are ready before installing.
b
、
Check whether there's the leakage of the CISS, whether some tubes have been separated from the CISS
2. Printer Testing
1) Check whether the printer is in normal condition, like mechanical status, lubrication status etc.
2) Print testing lines to ensure the printing head is good condition.
3) Print pictures to see whether the printing image is good or not..
Please use this CIS System easily, it will not reduce or raise the accurateness of the printer. If the testing result is
abnormal, please consult the local dealer for this products.
3. Installation Procedures
Step 1: Preparation
Put the CISS on the right side of the printer. Pull out the small rubber plug from the Place 6pcs of air filters into air holes,
and place all the tubes at correct position. air hole as picture shown above.
Step 2: Take out the original cartridges
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Epson CX7300
Summary
Push it upside until it is locked by the third clip in the red circle. Step 5: Install CIS Catridges Move the carriage to the left side Make the cartridge round the printer cover as above show Move the carriage back to the original position Put in the special cartridge of CISS according to A sound D...
Step 9: Check the nozzle Nozzle is ok Print test lines. If it is OK, then you can begin using. Broken Lines If there is broken lines, then pls clean the printer head. Enter Checking Nozzle Panel Broken lines may be caused by air entering the nozzles. If there is still some broken lines after cleanin...
Press the reset button Press the ink-changing button again Press the ink-changing button again, then you will find the cartridges are full of ink. And you can print again. Another reset method is: turn down the printer for one minute and then turn it on. 5. Refill Ink Please pay attention to the ink...
