Epson 5030UBe- User Manual

Quick Setup

Before using the projector, make sure you read the safety instructions in the
online

User’s Guide

.

Choose a location

Keep the projector level and place it at a height so its lens is even with the
top or bottom of the screen and is centered horizontally. If this isn’t possible,
use the lens shift dials or the keystone correction buttons on the projector to
reposition the image (see “Adjust the image”).

In order to view 3D images correctly, RF 3D glasses must be worn within 32 feet
(10 m) of the projector. Use the image below to determine the viewing distance
for 3D projection (the shading represents the 3D viewing area):

See the online

User’s Guide

for more information on where to place your

projector.

Connect the projector

Choose from the following connections. For additional connection types, see
the online

User’s Guide.

Video device

Connect up to 4 video devices and use the Source

buttons on the remote

control or the

button on the projector to switch between them.

Component video cable

RCA video cable

HDMI cable

WirelessHD (PowerLite Home Cinema 5030UBe only)

Follow these steps to set up the included WirelessHD Transmitter.

1

Place the transmitter within 32 feet (10 m) of the projector. Make sure the
front of the transmitter faces the front of the projector. See the online

User’s Guide

for more information on the WirelessHD transmission range.

Note:

Do not place the transmitter on a metal surface, as this may

interfere with the signal. Make sure there are no obstructions between
the transmitter and the projector.

2

Plug the AC adapter into the transmitter and a wall outlet.

3

Connect the HDMI cables to your video input devices and the HDMI ports
on the side and back of the WirelessHD Transmitter. You can connect up
to five input devices to the transmitter. See “Viewing WirelessHD content”
for information on switching between input sources

Note:

You can connect tablets, smartphones and other devices that

support the MHL™ standard to the HDMI port on the side of the
WirelessHD Transmitter. Devices that use MHL connection include the
Samsung™ Galaxy Note II™ and the Roku

®

Streaming Stick™. Some

devices may require an adapter or may not require an MHL cable.
Not all features or functions may be supported. Check your device’s
documentation for more information.

4

To use the transmitter as a pass-through device to a television or other
display, connect an HDMI cable to the display device and the HDMI output
port on the rear of the transmitter. See “Viewing WirelessHD content” for
information on switching between wireless and wired display modes.

Connect audio

Connect your device’s audio output to your home theater receiver or powered
speakers.

Home theater system

Video source

Surround sound

Receiver

Projector

Video cable

Powered speakers

External speakers

Video source

Projector

Video cable

Note:

See your home theater receiver documentation for more information

on connections.

Turn on your equipment

1

Turn on your video source.

2

Plug in the projector.

3

Press the

power button on the projector or the

On

button on the

remote control. The shutter opens and the power

light flashes blue,

then stays on.

Note:

To shut down the projector, press the

power button on the

projector or the

Standby

button on the remote control twice, then

unplug it. You don’t have to wait for the projector to cool down.

4

The default language of the menu system is English. To select another
language, press the

Menu

button on the projector or remote control.

Select

Extended

and press

Enter

. Select

Language

and press

Enter

.

Select your language and press

Enter

. Press the

Menu

button to exit

the menu system.

Adjust the image

1

If you don’t see an image, press one of the Source

buttons on the remote

control or the

button on the projector to select the image source.

Note:

If you still see a blank screen or have other display problems,

see “Troubleshooting.”

2

Turn the horizontal and vertical lens shift dials to adjust the image
position and center it on the screen.

3

To raise the image, adjust the front feet as shown below.

4

Turn the zoom ring to reduce or enlarge the image.

5

Turn the focus ring to sharpen the image.

6

Your projector automatically adjusts images that look like

or

,

but if necessary you can press the or buttons on the projector to
correct this.

Note:

When setting up the projector, make sure that it is placed level

to the screen in order to provide the best possible image quality. If you
must set up the projector at an angle, use the or buttons to correct
the image shape.

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).

Choose which source

to display

Turn projector on

Access projector

menus

Turn off projector

display

Navigate projector

menus

Turn projector off

Switch between

2D and 3D

Control WirelessHD

functions

For more information on using the remote control, see the online

User’s Guide

.

PowerLite

®

Home Cinema 5030UB/5030UBe

PowerLite

®

Pro Cinema 4030/6030UB