Epson 5025UB- User Manual

Quick Setup

Before using the projector, make sure you read the safety instructions in the
online User’s Guide.

Choose a location

Keep the projector level and place it at a height so its lens is even with the
top or bottom of the screen and is centered horizontally. If this isn’t possible,
use the lens shift dials or the keystone correction buttons on the projector to
reposition the image (see “Adjust the image”).

In order to view 3D images correctly, RF 3D glasses must be worn within 32 feet
(10 m) of the projector. Use the image below to determine the viewing distance
for 3D projection (the shading represents the 3D viewing area):

See the online User’s Guide for more information on where to place your
projector.

Connect the projector

Choose from the following connections. For additional connection types, see
the online User’s Guide.

Video device

Connect multiple video devices and use the Source buttons on the remote
control or the

button on the projector to switch between them.

Component video

cable

RCA video cable

HDMI cable

Computer

VGA cable

HDMI cable

HDMI port

Connect one end of an HDMI cable to the projector’s

HDMI

port and the other

end to an HDMI port on your computer.

Monitor port

Connect one end of a VGA cable to the projector’s

PC

port, and the other end

to your computer’s

monitor port. If you are using a laptop, switch it to

external display (see “Troubleshooting”).

Connect audio

Connect your device’s audio output to your home theater receiver or powered
speakers.

Home theater system

Video source

Surround sound

Receiver

Projector

Video cable

Powered speakers

External speakers

Video source

Projector

Video cable

Note:

See your home theater receiver documentation for more information

on connections.

Turn on your equipment

1

Turn on your video source or computer.

2

Plug in the projector.

3

Press the

power button on the projector or the

On

button on the

remote control. The shutter opens and the power light flashes blue,
then stays on.

Note:

To shut down the projector, press the

power button on the

projector or the

Standby

button on the remote control twice, then

unplug it. You don’t have to wait for the projector to cool down.

4

The default language of the menu system is English. To select another
language, press the

Menu

button on the projector or remote control.

Select

Extended

and press

Enter

. Select

Language

and press

Enter

.

Select your language and press

Enter

. Press the

Menu

button to exit

the menu system.

Adjust the image

1

If you don’t see an image, press one of the Source buttons on the remote
control or the

button on the projector to select the image source.

Note:

If you still see a blank screen or have other display problems,

see “Troubleshooting.”

2

Turn the horizontal and vertical lens shift dials to adjust the image
position and center it on the screen.

3

To raise the image, adjust the front feet as shown below.

4

Turn the zoom ring to reduce or enlarge the image.

5

Turn the focus ring to sharpen the image.

6

If your image looks like

or

, you can press the or buttons on

the projector to correct this.

Note:

When setting up the projector, make sure that it is placed level

to the screen in order to provide the best possible image quality. If you
must set up the projector at an angle, use the or buttons to correct the
image shape.

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).

Choose which source

to display

Turn projector on

Access projector menus

Turn off projector
display

Navigate projector
menus

Turn projector off

Switch between

2D and 3D

For more information on using the remote control, see the online User’s
Guide.

Viewing 3D images

To view 3D content, you must first connect a 3D-compatible video device to
one of the

HDMI

ports on your projector. You also need a pair of Epson

®

(part

number V12H548006) or Epson-compatible RF 3D active shutter glasses.

1

Turn on and begin playback on the 3D-compatible video device.

Note:

Make sure you set the video device to play content in 3D mode.

2

Press the

2D/3D

button on the remote control, if necessary.

3

Slide the power switch on your 3D glasses to the

On

position.

Note:

If the glasses don’t automatically display 3D content, you may

need to pair them with the projector. Move the glasses within 10 feet
(3 m) of the projector, then press and hold the

Pairing

button on the

3D glasses for at least 3 seconds. The status light on the glasses will
alternately flash green and red, then remain green for 10 seconds if
pairing is successful.

PowerLite

®

Home Cinema 5025UB