Enviro C-10365 - Manual
Enviro C-10365 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety Precautions
- Page 3 – Table of Contents
- Page 4 – Codes And Approvals
- Page 5 – Specifications
- Page 6 – NOTE: Venting terminals shall not be recessed into walls or siding.; Initial Installation; QUALIFIED INSTALLERS ONLY; D E
- Page 8 – FOLLOW THE VENT LENGTH DIAGRAM PRECISELY.
- Page 13 – Roof Pitch
- Page 16 – IN; STALLATION INSTRUCTIONS:
- Page 21 – owner’s conversion kit.
- Page 22 – GAS LINE CONNECTION; Always check for gas leaks with a soap; TO TEST VALVE PRESSURES; NEVER USE AN OPEN FLAME FOR LEAK TESTING.
- Page 23 – Secondary Installation; NOTE: The logs are fragile and should be handled gently.
- Page 24 – CAUTION: NEVER OPERATE THIS APPLIANCE WITH THE GLASS DOOR REMOVED.; ALL
- Page 25 – Operating Instructions; FOR YOUR SAFETY READ COMPLETELY BEFORE OPERATING.; WHAT TO DO IF YOU SMELL GAS
- Page 26 – Routine Maintenance and Service
- Page 27 – Trouble Shooting; Problem
- Page 28 – Parts List
- Page 30 – Parts Diagram - Chassis
- Page 32 – Warranty; TO THE DISTRIBUTOR
- Page 33 – Installation Data Sheet
B Y : S H E R W O O D I N D U S T R I E S L T D
OWNER’S MANUAL
This appliance may be installed in an after market permanently
located, manufactured (mobile) home, where not prohibited by
local codes.
This appliance is only for use with the type of gas indicated on the
rating plate. This appliance is not convertible for use with other
gases, unless a certified kit is used.
WHAT TO DO IF YOU SMELL GAS
• Open windows/Extinguish any open flame.
• Do not try to light any appliance.
• Do not touch any electrical switch or use any phone in your
building.
• Immediately call your gas supplier from a neighbour’s phone.
Follow the gas supplier’s instructions.
• If you cannot reach your gas supplier, call the fire
department.
WARNING
If the information in this manual is not followed exactly, a fire or explosion may
result causing property damage, personal injury or loss of life. Installation and
service must be performed by a qualified installer, service agency or the gas supplier.
FOR YOUR SAFETY
Do not store or use gasoline or other Flammable vapours and liquids in the vicinity of
this or any other appliance.
EG40-070
Massachusetts installations (Warning): This product must be installed by a licensed
plumber or gas fitter when installed within the Commonwealth of Massachusetts. Other
Massachusetts code requirements:-Flexible connector must not be longer than 36
inches, shut off valve must be a “T” handle gas cock, only direct vent sealed combustion
products are approved for bedroom/bathrooms, fireplace dampers must be removed or
welded in the open position prior to the installation of a fireplace insert or gas log.
EG40 DV
SHERWOOD INDUSTRIES IS AN ENVIRONMENTALLY RESPONSIBLE COMPANY. THIS MANUAL IS PRINTED ON RECYCLED PAPER.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
FOR SAFE INSTALLATION AND OPERATION OF YOUR “ENVIRO” HEATER, PLEASE CAREFULLY READ THE FOLLOWING INFORMATION: • All ENVIRO gas-fired appliances must be installed in accordance with their instructions. Carefully read all the instructions in this manual first. Consult the building authority having jur...
Table of Contents 3 Safety Precautions..........................................................................................2Table of Contents...........................................................................................3Codes And Approvals..............................................
DIRECT VENT: This type is identified by the suffix DV. This appliance draws all of its air for combustion from outside the dwelling, through a specially designed vent pipe system. This appliance has been tested and approved for installations from 0 feet to 4500 feet (1372 m) above sea level. In the ...