Enviro 50-1096 - Manual
Enviro 50-1096 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety Precautions
- Page 3 – Table of Contents
- Page 4 – Codes And Approvals; This ENVIRO SIENNA Fireplace:
- Page 5 – Specifications; chained to the fireplace.
- Page 7 – If not recently done, remove the glass and let the unit air out; Turn on gas to the heater. Leak test all joints; NEVER USE AN OPEN FLAME FOR LEAK TESTING.; the rocker switch to ON. Check that all burner ports have flame.; Operating Instructions; For Your Safety, Read Safety Precautions And
- Page 9 – Maintenance And Service
- Page 10 – TO BE INSTALLED BY A QUALIFIED SERVICE AGENCY ONLY
- Page 11 – Initial Installation
- Page 12 – blockage or severe down draft conditions.
- Page 13 – QUALIFIED INSTALLERS ONLY
- Page 14 – ENVIRO
- Page 15 – When servicing controls,
- Page 16 – exceeds
- Page 18 – Secondary Installation; care to not knock the pilot and the side brick panels.
- Page 20 – NOTE: The logs are fragile and should be handled gently.; left log
- Page 22 – ports air holes are blocked.; Never operate the fireplace with the glass door removed.; minimum for Natural Gas and 7⁄8” (22 mm) minimum
- Page 23 – The brick panel set is fragile, handle with extreme care.
- Page 24 – Trouble Shooting; Problem
- Page 25 – Parts List- Unit Components; Reference
- Page 26 – Parts Diagram - Components; SIE
- Page 27 – Parts Diagram - Burner
- Page 29 – Parts Diagram - Options
- Page 30 – Warranty; When filing a warranty claim, please
- Page 31 – Installation Data Sheet
SHERWOOD INDUSTRIES IS AN ENVIRONMENTALLY RESPONSIBLE COMPANY. THIS MANUAL IS PRINTED ON RECYCLED PAPER.
B Y : S H E R W O O D I N D U S T R I E S L T D
OWNER’S MANUAL
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
This appliance is
only for use with
the type of gas
indicated on the
rating plate. This
appliance is not
convertible for use
with other gases,
unless a certified
kit is used.
WHAT TO DO IF YOU SMELL GAS
• Open windows/extinguish any open flame.
• Do not try to light any appliance.
• Do not touch any electrical switch or use any
phone in your building.
• Immediately call your gas supplier from a
neighbour’s phone. Follow the gas supplier’s
instructions.
• If you cannot reach your gas supplier, call the fire
department.
WARNING
If the information in this manual is not followed exactly, a fire or explosion
may result causing property damage, personal injury or loss of life.
Installation and service must be performed by a qualified installer, service
agency or the gas supplier.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapours and
liquids in the vicinity of this or any other appliance.
50-1096
Massachusetts installations (Warning): This product must be installed by a licensed plumber or
gas fitter when installed within the Commonwealth of Massachusetts. Other Massachusetts code
requirements: Flexible connector must not be longer than 36in, shut off valve must be a “T” handle
gas cock; only direct vent sealed combustion products are approved for bedrooms/bathrooms;
fireplace dampers must be removed or welded in the open position prior to the installation of a
fireplace insert or gas log.
Sienna
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
FOR SAFE INSTALLATION AND OPERATION OF YOUR “ENVIRO” HEATER, PLEASE CAREFULLY READ THE FOLLOWING INFORMATION: • All ENVIRO gas-fired appliances must be installed in accordance with their instructions. Carefully read all the instructions in this manual first. Consult the building authority having jur...
Table of Contents 3 Safety Precautions.....................................................................................................2 Table of Contents......................................................................................................3 Codes And Approvals......................
DIRECT VENT: This type is identified by the suffix DV. This appliance draws all of its air for combustion from outside the dwelling, through a specially designed vent pipe system.This appliance has been tested and approved for installations from 0 feet to 4500 feet (1372 m) above sea level. BV: This...