Enviro 2100 - Manual
Enviro 2100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety Precautions; FOR SAFE INSTALLATION AND OPERATION OF YOUR “ENVIRO” WOODSTOVE,
- Page 3 – Table of Contents
- Page 4 – Operating Instructions
- Page 9 – Specifications
- Page 10 – Installation
- Page 13 – A L
- Page 17 – Parts List
- Page 18 – Parts Diagram
- Page 19 – Warranty
- Page 20 – Installation Data Sheet
SHERWOOD INDUSTRIES IS AN ENVIRONMENTALLY RESPONSIBLE COMPANY. THIS MANUAL IS PRINTED ON RECYCLED PAPER.
B Y : S H E R W O O D I N D U S T R I E S L T D
OWNER’S MANUAL
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Wood Stove
2100 Freestanding
PLEASE READ THIS ENTIRE MANUAL BEFORE INSTALLATION AND USE OF THIS
WOOD BURNING ROOM HEATER. FAILURE TO FOLLOW THESE INSTRUCTIONS
COULD RESULT IN PROPERTY DAMAGE, BODILY INJURY OR EVEN DEATH.
Contact your local building or fire officials, or the authority having jurisdiction
about restrictions and installation inspection requirements in your area.
This heater meets the U. S. Environmental Protection Agencies
emission limits for wood heaters sold after July 1st, 1988.
Under specific conditions this heater has been shown to deliver
heat at rates ranging from 11,800 to 34,000 BTU per hour.
50-1084
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Safety Precautions FOR SAFE INSTALLATION AND OPERATION OF YOUR “ENVIRO” WOODSTOVE, PLEASE CAREFULLY READ THE FOLLOWING INFORMATION: ● Please read this entire manual before you install and use your new heater. Failure to follow these instructions may result in property damage, personal injury, and ev...
Table of Contents 3 Safety Precautions.........................................................................................................2Table of Contents...........................................................................................................3Operating Instructions............
Operating Instructions FIRST START When first installed, the chimney, firebricks and steel are cold and it usually takes several hours on a fairly high burn for them to become hot and dry enough for the stove to function well. The paint will smell a little for the first time or two as it cures. You ...
