Elo touch monitor - Manual

2-3 C H A P T E R 2 C HAPTER 2 I NSTALLATION AND S ETUP This chapter discusses how to install your CRT touchmonitor and how to install Elo TouchSystems driver software. Unpacking Your Touchmonitor Check that the following 5 items are present and in good condition: N OTE : Power cord is not included....

2-4 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Connecting Your Touchmonitor I MPORTANT : Before connecting the cables to your touchmonitor and PC, be sure that the computerand touchmonitor are turned off. Connect the Video Cable • Connect one end of the video cable to the vide...

2-5 Connect the Serial Touchscreen Cable • Connect the touchscreen cable. Connect one end to the appropriate port on the back of your computer. Connect the other end of the cable to the touchscreen connector on your touchmonitor. The touchscreen cable connectors should fit snugly into the connectors...

2-6 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Connect the Power Cable • Your monitor does not include a power cable. You may either purchase a country specific power cable from Elo (www.elogaming.com), or construct your own custom power cable (see Appendix B for details). Con...

2-7 Installing the Driver Software Elo TouchSystems provides driver software that allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD-ROM for the following operating systems: • Windows XP • Windows 2000 • Windows Me • Windows 98 • Windows 95 • Windows NT 4.0 A...

2-9 Installing the Touch Driver for MS-DOS and Windows 3.1 You must have a DOS mouse driver (MOUSE.COM) installed for your mouse if you wish to continue using your mouse along with your touchmonitor in DOS. To install Windows 3.x and MS-DOS from Windows 95/98, follow the directions below: 1 Insert t...

3-11 C H A P T E R 3 C HAPTER 3 O PERATION About Touchmonitor Adjustments By design, your Elo Entuitive touchmonitor should not require any adjustments. The factory settings will give you optimum video results with most standard PC video display adapters. However, after connecting your touchmonitor ...

3-12 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Touchmonitor Controls You can adjust the screen display by using the plastic knob labeled OSD located on the right-hand side of the touch controller bracket. Using the On Screen Display (OSD) 1 Push the OSD knob to access the OSD...

3-13 OSD Adjustments Symbol Function Process H. Size Adjusts the horizontal size of the entire screen image. H. Position Adjusts the horizontal position of the entire screen image. V. Size Adjusts the vertical size of the entire screen image. V. Position Adjusts the vertical position of the entire s...

4-17 C H A P T E R 4 C HAPTER 4 T ROUBLESHOOTING Problem Suggestion (s) No picture. Your touchmonitor may not be getting power. Make certain that your power strip is plugged into the wall socket and that the PC and touchmonitor are plugged in and powered on. Test the power supply by trying different...

A-19 A P P E N D I X A C HAPTER 4 T OUCH T ECHNOLOGY Touchscreens: An Overview Typically, users communicate with computers by using a mouse, a keyboard, or a combination of the two. Users who are not keyboard-literate or mouse-savvy can become frustrated with how long human-to-computer interactions ...

A-20 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e iTouch Touchscreens Elo built on its IntelliTouch surface wave technology to create its iTouch "touch-on-tube" solution. Elo eliminated the clear glass layer between the viewer and the display. iTouch touchmonitors have b...

B-21 A P P E N D I X B C HAPTER 4 T OUCHMONITOR S AFETY DANGER As this equipment is received it presents an electrical shock hazard that could result in serious injury or death. Only qualified persons should work around this equipment when it is energized. This equipment is intended to be used by a ...

C-23 A P P E N D I X C C HAPTER 4 T ECHNICAL S PECIFICATIONS N OTE : All specifications are subject to change. Touchmonitor Specifications 19"Monitor 17" Monitor 15" Monitor Picture Tube 19” (18” diagonal viewable image), 0.25-mm dot pitch. 17” (15.7” diagonal viewable image), 0.27-mm do...

C-27 Power Consumption The touchmonitor comes with a power-saving feature that controls its power consumption. This feature complies with both the EPA’s Energy Star requirements. It also conforms to the Display Power Management System (DPMS) power-down signaling method approved by the Video Electron...

C-28 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Preset Timing Table Your Elo Entuitive touchmonitor has 5/4 preset timing modes. The following are modes preset as factory defaults: *Recommended primary mode No. Resolution Horizontal Frequency Refresh Rate 1 640x400 31.5 kHz 70...

29 C HAPTER 4 R EGULATORY I NFORMATION Electrical Safety Information A) Compliance is required with respect to the voltage, frequency, and currentrequirements indicated on the manufacturer’s label. Connection to a differentpower source than those specified herein will likely result in improper opera...

30 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e 1) In order to meet emission and immunity requirements, the user mustobserve the following: a) Use only the provided I/O cables to connect this digital device withany computer. b) To ensure compliance, use only the provided manufac...

31 C HAPTER 4 W ARRANTY Except as otherwise stated herein or in an order acknowledgment delivered to Buyer, Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship. With the exception of negotiated warranty periods, the warranty for the touchmonitor and compon...

I n d e x - 3 3 A About the Product, 1About Touchmonitor Adjustments, 11 B Bottom Corner, 13Brightness, 15 C C. Correct, 14Chemical Resistance, 25Color Control, 14Connect the Power Cable, 6Connect the Serial Touchscreen Cable, 5Connect the Video Cable, 4Connecting Your Touchmonitor, 4Connector Infor...