Page 2 - LC D Desktop; Revision B
Elo Entuitive Touchmonitor User Guide 15 " LC D Desktop ET1529L Series Revision B P/N 008603 Elo TouchSystems, Inc. 1-800-ELOT OUCH www.elotouch.com
Page 4 - Table of Contents
Chapter 1 Intr oduction 1 Product Description .................................................. 1Detailed LCD Display PerformanceRequir ements ........................................................... 2 Customer Display ............................................... 4 Serial Version ...............
Page 7 - C H A P T E R; NTRODUCTION; Product Description
C H A P T E R 1 I NTRODUCTION Product Description The ET1529L is a retail terminal designed to present information to the operator and the customer. The ET1529L is available in serial and USB versions or combo touch monitor. The ET152 9L functionally consists of a 15.0” LCD main displ ay with a touc...
Page 8 - Detailed LCD Display Performance Requirements
The credit card reader reads all three stripes on a standard credit card or drivers license. The c redit card is read by sliding the credit card, str ipe side t oward the display through the credi t card reade r forward or backward. There is a USB cre dit card reader only. The Hub provide s 4 inter ...
Page 10 - Customer Display
Customer Display The Customer Di splay is a twenty character two line vacuum fluorescent display (VFD). It c onsist s of a VFD and VFD c ontrol ler. Seri al Versi on Opti onal Parameters Characters pe r row 20 Number of rows 2 Charact er 5x7 dot matrix configuration Char acter He ight 9.5mm Charac t...
Page 11 - Credit Card Reader
Speci ficati ons Sensor Se cuGe n FOR Im age Capt ure Spe ed 600ms/frame Image Tr ansf er Speed 500Byte/ms Pixel Resolution 356x292 USB Signal ing Type Full Spee d Type Theo ry of Operat i on The USB hos t i ni tiate s com munic at ion wit h t he FDU0 1 usi ng oper ati on c omm ands (Sens or LED On,...
Page 13 - NSTALLATION AND; Unpacking Your Touchmonitor
C H A P T E R 2 I NSTALLATION AND S ETUP This c hapter dis cus ses how to ins tal l your LCD to uchm oni tor and ho w to install Elo Touc hSystem s drive r software. Unpacking Your Touchmonitor Check that the fo llowing it ems are pre sent and in good condition: or Touchmoni tor To uchmonit or with ...
Page 14 - Product Overview
Product Overview Main Unit or Rear View 2- 8 Elo Entuiti ve Touchmoni tor User Gui de
Page 17 - USB Interface Connection; Remove the Cable Cover
USB Interface Connection Your touchmonitor comes with only one touchscreen connector cables: USB cable. (For Windows 2000 , Me and XP systems only.) To set up the dis play, please refer to the following figure s and proce dures: Remove the Cable Cover The cables are connected at the back of t he mon...
Page 23 - Replace the Cable Cover
Replace the Cable Cover Cable co ver lip cables Then you have attac hed all the cables to the monitor, gently bring al l the cables to ward the s tandard s o they fi t under the cover lip. Snap the Cable c over i n place over the co nnecti ons. 2-17
Page 24 - Optimizing the LCD Display; Installing the Peripheral Device Drivers; Finger Print Reader
Optimizing the LCD Display To ens ure the LCD display works well with your comput er, configur e the display mode of your graphi c car d to make it les s than or equal to 10 24 x 768 r esolution, and m ake sure the timing of the display mode is compatible with the LCD display. Refer to Appen- dix A ...
Page 25 - Convert M SR from HID to keyboard emulation
M agnetic Stripe Reader No device are nee ded. Testing the USB M SR Keyboard Emulation 1 Plug in the de vice. 2 Ope n MS Wor d. 3 Sli de the card thro ugh t he MSR to view t he data. Testing the USB-HID Class M SR 1 On the CD, browse to T ouch Moni tor Peripheral s\Magneti c Stripe Card Readers\Demo...
Page 28 - Convert M SR from keyboard emulation to HID
1.19 The DATA=01 means i t’s USB Keyboard Emulati on. 1.20 You must now rese t the MSR by sending the c ommand 02. 1.21 Type 02 i nto ar ea under the headi ng Mes sage(Hex) 1.22 The n cli ck on Send Message. 1.23 Doubl e click on The KB MSR Test ic on in the desktop and slide t he test c card. The f...
Page 33 - Installing the Touch Driver Software
To te st the dri vers: 1 In windo ws cl ick o n Start > Run 2 Enter “cm d” > O K 3 Type “ ECH O ELO >\.\ LCLD9 \” > Ent er The di spl ay will sho w ELO. Installing the Touch Driver Software Elo TouchSystems provides driver software that allows your touc hmonitor to work with your compute...
Page 35 - PERATION; About Touchmonitor Adjustments
C H A P T E R 3 O PERATION About Touchmonitor Adjustments Your touchmonito r will unlikely re quire adjust ment. Variat ions i n vide o output and ap- plic ation may require adjustme nts to your t ouchmo nitor to optimize t he qual ity of the di splay. For bes t performanc e, your touc hmonitor sho ...
Page 36 - ” LCD Function Key
5 4 3 2 1 15.0” LCD Function Key Controls Function 1 Po we r Switch Turns the displa y system power on or off . 2 Select Dis plays the OS D menus on the screen and used to selec t (“Clockwise” and “Counter-c lockwise” direction) the OSD control op tions on the screen. 3 Adjusts the decre asing value...
Page 37 - Controls and Adjustment; OSD M enu Functions
Controls and Adjustment OSD Lock/Unlock You are able to lock and unlock the OSD feat ure. The monitor is shipped in the unlocked position. To lock the OSD: 1 Press the Menu button and button simultaneously for 2 se conds. A window will appear di splaying “OSD Unl ock”. Conti nue t o hold the buttons...
Page 39 - Display Angle
Language • Languages us ed fo r OSD menu displ ay: Englis h, Fre nch, German, Spanish and J apane se. Recall Defaults • Recall s the factory OSD default se ttings. OSD Timeout • Adjusts the amount of t ime in whic h the OSD will disappe ar. Power-Save (No Input) • The LCD pane l background is c ut w...
Page 41 - ” LCD Function Key
4 3 2 1 12.1” LCD Function Key Controls Function 1 Select Dis plays the OS D menus on the screen and used to selec t (“Clockwise” and “Counter-c lockwise” direction) the OSD control op tions on the screen. 2 Adjusts the decre asing value of the selec ted OSD contro l option. 3 Adjusts the increasing...
Page 44 - OSD Timeout; OSD Exit
Language • Sele ct the l anguage used fo r the OSD menu from amo ng Engl ish, Fre nch, Deutsch, Spanish, and Japane se. Recall Defaults • Restore al l original factory defaults. OSD Timeout • Adj ust how lo ng the OSD menu is di splayed. OSD Exit • Exit ’s the OSD m enu. 3- 38 Elo Entui tive Touc hm...
Page 45 - ROUBLESHOOTING; Solutions to Common Problems
C H A P T E R 4 T ROUBLESHOOTING If yo u are expe riencing t rouble wi th your to uchmonitor, refer t o the foll owing tabl e. If the problem persists, please contact your local dealer or our servi ce center. Elo Techni- cal Support numbers are list ed on t he last page of this manual. Solutions to ...
Page 47 - ATIVE
C H A P T E R A N ATIVE R ESOLUTION The nati ve res olutio n of a monito r i s t he res olutio n l eve l at which the LCD panel is designed to perform best. For the Elo LCD touchmonito r, the native resolut ion is 1024 x 768 for the 15.0 inch size. In almost all cases, screen images look best when v...
Page 49 - OUCHMONITOR
C H A P T E R B T OUCHMONITOR S AFETY This manual contains i nformation that is important for the proper setup and maintenance of yo ur touchm onitor. Before set ting up and powering on your new touc hmonitor, read thro ugh this manual, es pecial ly Chapter 2 (Installation), and Chapte r 3 (Operati ...
Page 50 - Care and Handling of Your Touchmonitor
Care and Handling of Your Touchmonitor The fol lowi ng t ips will hel p kee p yo ur Elo Entui tive touc hmonitor functio ning at the optimal le vel. • To avoid risk of elect ric shock, do not disassembl e the bric k supply or display unit cabine t. The uni t is not user servic eable. Reme mber to un...
Page 51 - ECHNICAL; Display Modes
C H A P T E R C T ECHNICAL S PECIFICATIONS Display Modes Your Elo Entuitive to uchmonit or is co mpatible with the following standard video modes: Ite m Re s olution Type H. Scan(KHz) V. Scan(Hz) Po l. 1 640X350 VGA 31.469 70.087 + / 2 720X400 VGA 31.469 70.087 - / + 3 640X480 VGA 31.469 59.940 - / ...
Page 52 - Touchmonitor Specifications
Touchmonitor Specifications Mode l ET15 29L LCD Dis play 15. 0” TF T Ac tive Matrix Panel Dis play Size 304.1 (H) x 228(V) mm Pix e l Pitch 0.297(H) x 0.297 (V) mm Dis play M ode VGA 640 x 3 50 (70 Hz) VGA 720 x 4 00 (70 Hz) VGA 640 x 480 (6 0 / 72 / 75 Hz) SVGA 800 x 600 (56 / 60 / 72 / 75Hz) XGA 1...
Page 53 - AccuTouch Touchscreen Specifications
AccuTouch Touchscreen Specifications M e chanical Cons truction Top : Po lyes ter with outs ide hard- surface c oating with c lear or antigla re finish. Inside : Trans parent conduc tive co ating. Bo ttom: Glass sub stra te with uniform re sis tive coa ting. Top and bottom layers separated by Elo-pa...
Page 54 - IntelliTouch Touchscreen Specifications
IntelliTouch Touchscreen Specifications M e chanical Pos itional Acc uracy Standard deviation of e rror is le ss than 0. 080 in. (2 .03 mm). Equates to le ss than ± 1%. Touchpoint De ns ity More than 100, 000 touchp oints/in2 (15,50 0 touchpoints/cm2). Touch Activ ation Force Typ ically less than 3 ...
Page 55 - Infrared Touchscreen Specifications
Infrared Touchscreen Specifications M e chanical Input M e thod Input Method Finger o r glove d hand activation Ele ctrical Pos itional Acc uracy Typ ical centroid accuracy: 2 mm with 1 mm STD error Re s olution Touchpo int dens ity is b ased on controller resolutio n of 409 6 x 4096 Touch Activ ati...
Page 57 - REGULATORY INFORMATION
REGULATORY INFORMATION I. Electrical Safety Information: A) Compliance is requi red wi th res pect t o the voltage, fre quency, and current require- me nts indi cate d on the manufac ture r’s labe l. Connecti on t o a diff erent po wer sour ce than those specified herein will likely result in improp...
Page 61 - WARRANTY
WARRANTY Exc ept as o therwise stat ed he rein or in an order ackno wledgment del ivere d to Buyer, Se ll er war rants t o Buye r that the Pr oduc t s hall be fr ee of def ec ts i n m at er ials and wor kmans hip. With the exception of the negotiat ed warrant y per iods ; the warr anty for the touc ...
Page 63 - INDEX
Numer ics 15.0" LCD Touchmonitor (ET1529L-XXWA-1) Dimensions, 50 A About Touchmonitor Adjustments, 29 AccuTouch Touchscreen Specifications, 47 Auto Adjust, 32 B Base Bottom Vi ew, 9 Brightness, 32 C Care and Handling of Your Touchmonitor, 44 Chemical Resistance, IntelliTouch, 48 Chemical Resista...
Page 66 - USB INTELLIHEAD; FOR SWIPE READERS; TECHNICAL REFERENCE MANUAL
USB INTELLIHEAD FOR SWIPE READERS TECHNICAL REFERENCE MANUAL Manual Part Number 99875320-1P OCTOBER 2004 PRELIMINARY REGISTERED TO ISO 9001:2000 20725 South Annalee Avenue Carson, CA 90746 Phone: (310) 631-8602 FAX: (310) 631-3956 Technical Support: (651) 415-6800 www.magtek.com
Page 68 - iii; Limited Warranty
iii Limited Warranty MagTek, Inc. warrants that the Product described in this document is free of defects in materials and workmanship for a period of one year from the date of purchase where the date of purchase is defined as the date of shipment from MagTek. During this warranty period, MagTek sha...
Page 69 - iv; FCC WARNING STATEMENT
iv FCC WARNING STATEMENT This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environmen...
Page 71 - vi
Page 72 - SECTION 1. FEATURES AND SPECIFICATIONS; FEATURES
1 SECTION 1. FEATURES AND SPECIFICATIONS The USB (Universal Serial Bus) IntelliHead Swipe Reader is a compact magnetic stripe card reader that conforms to ISO standards. The Reader is compatible with any device with a USB interface. A card is read by sliding it past the head either forward or backwa...
Page 73 - CONFIGURATIONS; REFERENCE DOCUMENTS; MagTek
USB IntelliHead Swipe Reader 2 CONFIGURATIONS The Configurations are as follows: Table 1-1. Configurations ACCESSORIES The accessories are as follows: Part Number Description 21042806 USB MSR Demo Program with Source Code (Diskette) 99510026 USB MSR Demo Program with Source Code (WEB) REFERENCE DOCU...
Page 74 - SPECIFICATIONS
Section 1. Features and Specifications 3 SPECIFICATIONS Table 1-2 lists the specifications for the USB IntelliHead. Figure 1-2 shows the dimensions for the standard product. Table 1-1. Specifications Reference Standards ISO 7810 and ISO 7811 and AAMVA* Power Input 5V from USB bus Recording Method Tw...
Page 76 - SECTION 2. INSTALLATION; USB CONNECTION; WINDOWS PLUG AND PLAY SETUP; Magnetic Card Reader Design
5 SECTION 2. INSTALLATION This section describes the cable connection, the Windows Plug and Play Setup, and the physical mounting of the unit. USB CONNECTION Since the USB IntelliHead is supplied as an OEM product, the installation and system integration will be unique for each application. The read...
Page 78 - SECTION 3. OPERATION; CARD READ
7 SECTION 3. OPERATION CARD READ A card may be swiped past the read head at any time. The magnetic stripe must face toward the head and may be swiped in either direction. If there is data encoded on the card, the device will attempt to decode the data and then send the results to the host via a USB ...
Page 80 - SECTION 4. USB COMMUNICATIONS; HID USAGES
9 SECTION 4. USB COMMUNICATIONS This device conforms to the USB specification revision 1.1. This device also conforms with the Human Interface Device (HID) class specification version 1.1. The device communicates to the host as a vendor-defined HID device. The details about how the card data and com...
Page 81 - REPORT DESCRIPTOR
USB IntelliHead Swipe Reader 10 following table. The usage types are also listed. These usage types are defined in the HID Usage Tables document. Magnetic Stripe Reader usage page 0xff00: Usage ID (Hex) Usage Name Usage Type Report Type 1 Decoding reader device Collection None 20 Track 1 decode stat...
Page 82 - CARD DATA
Section 4. USB Communications 11 Item Value (Hex) Input (Data, Variable, Absolute, Buffered Bytes) 82 02 01 Usage (Command message) 09 20 Report Count (24) 95 18 Feature (Data, Variable, Absolute, Buffered Bytes) B2 02 01 End Collection C0 CARD DATA Card data is only sent to the host on the Interrup...
Page 84 - CARD ENCODE TYPE; TRACK DATA
Section 4. USB Communications 13 CARD ENCODE TYPE This one-byte value indicates the type of encoding that was found on the card. The following table defines the possible values. Value Encode Type Description 0 ISO/ABA ISO/ABA encode format 1 AAMVA AAMVA encode format 2 reserved 3 Blank The card is b...
Page 86 - Get Property Response Data:
Section 4. USB Communications 15 RESULT CODE This one-byte field contains the value of the result code. There are two types of result codes: generic result codes and command-specific result codes. Generic result codes always have the most significant bit set to zero. Generic result codes have the sa...
Page 87 - SOFTWARE_ID PROPERTY; String
USB IntelliHead Swipe Reader 16 Property ID is a one-byte field that contains a value that identifies the property. The following table lists all the current property ID values: Value Property ID Description 0 SOFTWARE_ID The device’s software identifier 1 SERIAL_NUM The device’s serial number 2 POL...
Page 88 - POLLING_INTERVAL PROPERTY
Section 4. USB Communications 17 SERIAL_NUM PROPERTY Property ID: 1 Property Type: String Length: 0 – 15 bytes Get Property: Yes Set Property: Yes Default Value: The default value is no string with a length of zero. Description: The value is an ASCII string that represents the device’s serial number...
Page 90 - INTERFACE_TYPE PROPERTY; Byte
Section 4. USB Communications 19 01 02 03 08 Example Set MAX_PACKET_SIZE property Response (Hex): Result Code Data Len Data 00 00 Example Get MAX_PACKET_SIZE property Request (Hex): Cmd Num Data Len Prp ID 00 01 03 Example Get MAX_PACKET_SIZE property Response (Hex): Result Code Data Len Prp Value 0...
Page 92 - SECTION 5. DEMO PROGRAM; INSTALLATION
21 SECTION 5. DEMO PROGRAM The demo program, which is written in Visual Basic, can be used to do the following: • Read cards from the device and view the card data • Send command requests to the device and view the command responses • Guide application developers in their application development by ...
Page 93 - SOURCE CODE
USB IntelliHead Swipe Reader 22 SOURCE CODE Source code is included with the demo program. It can be used as a guide for application development. It is described in detail, with comments, to assist developers. The book USB Complete by Jan Axelson is also a good guide for application developers, espe...
Page 94 - APPENDIX A. USB INTELLIHEAD SWIPE READER; Part Number Title
23 APPENDIX A. USB INTELLIHEAD SWIPE READER The following drawing is provided in this section: Part Number Title 21030006 USB-HID INTHD 3TK 125MM WRE, 5P CONN
Page 102 - Caution
1 SECTION 1. FEATURES AND SPECIFICATIONS The USB (Universal Serial Bus), HID Keyboard Emulation, Swipe Reader is a compact magnetic stripe card reader, which conforms to ISO standards. The Reader is compatible with the PC series of personal computers and emulates the operation of a keyboard. A card ...
Page 103 - The hardware configurations are shown in Table 1-1.; ACCESSORIES
USB HID Keyboard Emulation Swipe Reader 2 The hardware configurations are shown in Table 1-1. Table 1-1. Configurations ACCESSORIES The accessories are as follows: Part Number Description 21042806 USB MSR Demo Program with Source Code (Diskette) 99510026 USB MSR Demo Program with Source Code (WEB) R...
Page 110 - HOST APPLICATIONS
9 SECTION 4. USB COMMUNICATIONS This device conforms to the USB specification revision 1.1. This device also conforms with the Human Interface Device (HID) class specification version 1.1. The device communicates to the host as a HID keyboard device. The latest versions of the Windows operating syst...
Page 112 - . Vendor defined usages must
Section 4. USB Communications 11 PROGRAMMABLE CONFIGURATION OPTIONS This device has a number of programmable configuration properties. These properties are stored in non-volatile EEPROM memory. These properties can be configured at the factory or by the end user using a program supplied by MagTek. P...
Page 120 - TERMINATION_CHAR PROPERTY
Section 4. USB Communications 19 TERMINATION_CHAR PROPERTY Property ID: 5 Property Type: Byte Length: 1 byte Get Property: Yes Set Property: Yes Default Value: 0D (hex) (carriage return) Description: This property is defined as follows: mod c c c c c c c mod 0 – Send c after card data 1 – Send c aft...
Page 126 - Attach the device to a USB port on the host
25 SECTION 5. DEMO PROGRAM The purpose of this demo program is not to demonstrate card reading with this HID keyboard emulation device. Use a text editor application such as Windows Notepad to demonstrate card reading for this HID keyboard emulation device. Any application that allows user input fro...
Page 127 - The Clear Dialog button clears the Communication Dialog edit box.
USB HID Keyboard Emulation Swipe Reader 26 • Enter a command in the Message edit box. All data entered should be in hexadecimal bytes with a space between each byte. Enter the command number followed by the command data if there is any. The application will automatically calculate and send the comma...
Page 130 - INSTALLATION GUIDE; USB Interface Customer Pole Displays; HARDWARE INSTALLATION
INSTALLATION GUIDE LD9000U series User Manual available at our web site www.logiccontrols.com USB Interface Customer Pole Displays LD9000U, LD9200U, LD9300U, LD9400U, LD9500U, LD9900U, LD9000XU, LD9200XU, LD9300XU, LD9400XU, LD9500XU and LD9900XU HARDWARE INSTALLATION Your LD9000U family of pole dis...
Page 131 - SOFTWARE COMMANDS; INTERFACE TO SOFTWARE USING USB DEVICE NAME
Logic Controls, Inc. SOFTWARE COMMANDS Logic Controls pole displays are controlled by command codes and data from the computer. Commands are transmitted to the pole display as ASCII codes. The command codes listed below are expressed in hexadecimal (base 16) numbers enclosed inside angle brackets &l...
Page 132 - Customer Displays; by 20 character display; USER MANUAL
i Customer Displays 2 by 20 character display USER MANUAL Models: LD9000 Series
Page 133 - NOTICE
ii NOTICE The manufacturer of the POS pole display makes norepresentations or warranties, either expressed or implied, byor with respect to anything in this manual, and shall not beliable for any implied warranties of fitness for a particularpurpose or for any indirect, special or consequentialdamag...
Page 134 - TABLE OF CONTENTS
iii TABLE OF CONTENTS FEATURES .....................................................................................1 MODEL IDENTIFICATION............................................................2 CARTON CONTENTS ...................................................................2 INSTALLATION .....
Page 135 - Features - All Models
1 FEATURES The LD9000 family of pole displays offers a wide range of high qualityfeatures and models to choice from. Listed below are the featuresincorporated into each pole display. Not all features are available in allmodels. The model identification chart will assist you in selecting themodel bes...
Page 136 - MODEL IDENTIFICATION; CARTON CONTENTS; Metal base plate with mounting hardware.
2 MODEL IDENTIFICATION LD9 __ __ __ - __ __ X = Double Sided DisplayPT = Pass Thru25 = DB25F connector to computer POWER ADAPTER 0 = 120VAC* COMMAND SET 1 = 220VAC 0 = LOGIC CONTROLS* 1 = LOGIC CONTROLS SERIAL/PARALLEL INTERFACE WITH PASS-THRU 0 = SERIAL 9600 BAUD* 2 = SPECIAL COMMAND SET 1 ( Aedex ...
Page 137 - Serial Interface Non-pass-thru Models Installation
3 INSTALLATION Your PD9000 family of pole displays has been pre-assembled tomake the installation as simple as possible. Serial Interface Non-pass-thru Models Installation 1. Mount the pole display to the metal base plate using the mounting hardware provided. 2. The pole display can be used in a fre...
Page 139 - FUNCTIONAL TEST; MSDOS command prompt; Serial Interface Pole Displays Functional Test; Type “ABCDEFGH” and press ENTER key.The display will show
5 FUNCTIONAL TEST The following test sequence will verify that your pole display isworking properly. Before you start this procedure, you must install thepole display correctly as outlined under the INSTALLATION section.The functional test should be done under MSDOS command prompt by booting up the ...
Page 140 - Parallel Interface Pole Displays Functional Test
6 LD9100-PT, LD9300-PT, LD9400-PT and LD9500-PT 1. Type “ABCDEFGH” and press ENTER key.The display will show “ABCDEFGH” on the first line. 2. Type “ ^A PASSTHRU” ( ^A is entered as Ctrl-A ) and press ENTER key. The data will be passed through to the peripheral (e.g. aprinter). These characters are n...
Page 142 - INTERFACE CONNECTION; Serial Interface Connector Configuration
8 INTERFACE CONNECTION Serial Interface Connector Configuration The pin out configuration for the standard serial pole display is aDB9F connector. It plugs directly into the serial port of the computer. 1. DCD (tied to pins 4&6)2. NC3. TXD from PC4. DTR (tied to pins 1&6)5. Ground6. DSR (tie...
Page 143 - Parallel Interface Connector Configuration
9 Parallel Interface Connector Configuration All standard parallel pole displays will have a DB25 male connector. Itis connected to the printer port of the computer. 1. –Strobe 2. Data 0 3. Data 1 4. Data 2 5. Data 3 6. Data 4 7. Data 5 8. Data 6 9. Data 7 10. – Ack 11. Busy 12-17 NC 18-25 Ground Fo...
Page 145 - Message Scroll Left on Top Line
11 7. Carriage R eturn <0D>, (13), {^M}: The cursor moves to the left most digit of the row it is in. 8. Digit Select <10>, (16), {^P}: Moves the cursor to any position on the display with thiscommand followed by a data byte of <00> to <27>, or in decimal(00) to (39). 9. Curs...
Page 147 - Extended Pass-thru Command Set is available as option.; Standard Pass-thru Command Set
13 PASS-THRU COMMAND SET (LD9100-PT, LD9100X-PT): All software commands of the non-pass-thru single sided model areavailable with following additional commands for pass-thru anddouble-sided display control. When power is turned on or after areset command has been initiated, all text is displayed on ...
Page 148 - HARDWARE CONFIGURATION
14 HARDWARE CONFIGURATION Serial pole displays were factory configured for serial RS232Cinterface using the following protocol: · 9600 Baud Rate· 8 Data Bits· 1 Stop Bit· No Parity Other optional baud rates are available with factory settings. Refer tothe model identification chart for further infor...
Page 149 - DISPLAY CHARACTER CODES
15 DISPLAY CHARACTER CODES D7 0 0 0 0 0 0 0 0 D6 0 0 0 0 1 1 1 1 D5 0 0 1 1 0 0 1 1 D4 0 1 0 1 0 1 0 1 D 3 D 2 D 1 D 0 0 1 2 3 4 5 6 7 0 0 0 0 0 DP SP 0 @ P ‘ p 0 0 0 1 1 DC 1 ! 1 A Q a q 0 0 1 0 2 DC 2 " 2 B R b r 0 0 1 1 3 D L DC 3 # 3 C S c s 0 1 0 0 4 DI M DC 4 $ 4 D T d t 0 1 0 1 5 M S % 5 ...
Page 150 - GENERAL SPECIFICATIONS; Serial
16 GENERAL SPECIFICATIONS LD9000 LD900X OPTICAL: Number of rows 2 2 x 2 sides Number of digits/row 20 20 Dot matrix 5 x 7 5 x 7 Digit height) 0.374in. (9.5mm) 0.374in. (9.5mm) Digit width 0.244in. (6.2mm) 0.244in. (6.2mm) Character config. ASCII ASCII Brightness (typical) 900 cd/m 2 900 cd/m 2 Displ...
Page 151 - SecuGen FDU0
SecuGen _______________________________________________________ Products - 1 PC Peripheral Type, USB Fingerprint Recognition Device FDU02 SGD 03-03210001A SecuGen FDU0 2 General Description FDU02 is a Fingerprint Capture Device thatsupports the USB (Universal Serial Bus)interface and can do hot atta...
Page 152 - Supports only fingerprint optic recognition function
SecuGen _______________________________________________________ Products - 2 PC Peripheral Type, USB Fingerprint Recognition Device FDU02 SGD 03-03210001A SecuGen FDU0 2 Theory of Operation The USB host initiates the communication with the FDU02 using operation commands. Fingerprint data are then ca...
Page 153 - Supports both fingerprint optic recognition and mouse function
SecuGen _______________________________________________________ Products - 3 PC Peripheral Type, USB Fingerprint Recognition Device FDU02 SGD 03-03210001A SecuGen FDU0 2 ♦ Supports both fingerprint optic recognition and mouse function
Page 158 - Cable connection (Between USB interface and Sensor)
SecuGen _______________________________________________________ Products - 8 PC Peripheral Type, USB Fingerprint Recognition Device FDU02 SGD 03-03210001A SecuGen FDU0 2 Mounting ♦ Cable connection (Between USB interface and Sensor) FDU02AI USB interface board (FDU02AI) is cable-connected to the Fin...
