Page 2 - Revision C; Elo Touch Solutions
Elo Touch Solutions 19” LCD Rear-Mount Touchmonitor Optional Power Brick User Guide Revision C P/N E824781 Elo Touch Solutions 1-800-ELOTOUCH www.elotouch.com
Page 3 - Disclaimer; Trademark Acknowledgments
C opyright © 2012 ELO Touch Solutions. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, o...
Page 5 - C H A P T E R; NTRODUCTION; Product Description; Precautions
1-1 C H A P T E R 1 I NTRODUCTION Product Description Your new touchmonitor combines the reliable performance of touch technology with the latest advances in (LCD) display design. This combination of features creates a natural flow of information between a user and your touchmonitor. This LCD monito...
Page 6 - NSTALLATION AND; Unpacking Your Touchmonitor
2-2 C H A P T E R 2 I NSTALLATION AND S ETUP This chapter discusses how to install your LCD touchmonitor and how to install the driver software. Unpacking Your Touchmonitor Check that the following items are present and in good condition: LCD monitor Video cable USB cable Elo QuickStart CD Software ...
Page 10 - Installing the Driver Software
3-6 Installing the Driver Software ELO Touch Solutions provides driver software that allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD-ROM for the following operating systems: • Windows 7 • Windows Vista • Windows XP • Windows 2000 • Windows Me • Windows 98 ...
Page 11 - Pulse Recognition and IntelliTouch Plus monitor); Installing the Serial Touch Driver for Windows 7, Windows Vista,
3-7 Installing the Serial Touch Driver (not applicable to Acoustic Pulse Recognition and IntelliTouch Plus monitor) Installing the Serial Touch Driver for Windows 7, Windows Vista, Windows XP, Windows 2000, ME, 98/95 and NT4.0. NOTE: For Windows 2000 and NT4.0 you must have administrator access righ...
Page 12 - Installing the Serial Touch Driver for MS-DOS and Windows 3.1
3-8 Installing the Serial Touch Driver for MS-DOS and Windows 3.1 You must have a DOS mouse driver (MOUSE.COM) installed for your mouse if you wish to continue using your mouse along with your touchmonitor in DOS. To install Windows 3.x and MS-DOS touch driver from Windows 95/98, follow the directio...
Page 13 - Installing the USB Touch Driver; Installing APR USB Touch Driver for Windows 7, Windows Vista and
3-9 Installing the USB Touch Driver Installing the USB Touch Driver for Windows 7, Windows Vista, Windows XP, Windows 2000, ME and Windows 98. 1 Insert the ELO CD-ROM in your computer’s CD-ROM drive. If Windows 2000 or Windows 98 starts the Add New Hardware Wizard, do the following: 2 Choose Next . ...
Page 14 - PERATION; About Touchmonitor Adjustments
3-10 C H A P T E R 3 O PERATION About Touchmonitor Adjustments Your touchmonitor will not likely require adjustment. However, variations in video output and application may require adjustments to the touchmonitor to optimize the quality of the display. For best performance, your touchmonitor should ...
Page 15 - Rear Panel Controls; MENU
3-11 Rear Panel Controls MENU SEL 1 2 3 4 5 Control Function 1 Menu/Exit Display/exits the On Screen Display (OSD) menus. 2 1. Enter contrast of the OSD. 2. Increase value of the adjustment item. 3. Select item clockwise. 3 1. Enter brightness adjustment. 2. Decrease value of the adjustment item. 3....
Page 18 - Preset Modes
3-14 Preset Modes To reduce the need for adjustment for different modes, the monitor has default setting modes that are most commonly used as given in the table below. If any of these display modes are detected, the monitor automatically adjusts the picture size and centering. When no mode is matche...
Page 22 - ROUBLESHOOTING; Solutions to Common Problems
4-18 C H A P T E R 4 T ROUBLESHOOTING If you are experiencing trouble with your touchmonitor, refer to the following table. If the problem persists, please contact your local dealer or our service center. Solutions to Common Problems Problem Suggestion(s) The monitor does not respond 1. Check that t...
Page 23 - A P P E N D I X; ATIVE
A-19 A P P E N D I X A N ATIVE R ESOLUTION The native resolution of a monitor is the resolution level at which the LCD panel is designed to perform best. For the LCD touchmonitor, the native resolution is 1280 x 1024 for the 19 inch size. In almost all cases, screen images look best when viewed at t...
Page 25 - OUCHMONITOR
B-21 A P P E N D I X B T OUCHMONITOR S AFETY This manual contains information that is important for the proper setup and maintenance of your touchmonitor. Before setting up and powering on your new touchmonitor, read through this manual, especially Chapter 2 (Installation), and Chapter 3 (Operation)...
Page 26 - Warning
B-22 Care and Handling of Your Touchmonitor The following tips will help keep your touchmonitor functioning at the optimal level. • To avoid risk of electric shock, do not disassemble the brick power supply or display unit cabinet. The unit is not user serviceable. Remember to unplug the display uni...
Page 27 - ECHNICAL
Page 28 - Touchmonitor Specifications
C-24 Touchmonitor Specifications Model 1939L LCD Display 19” TFT Active Matrix Panel Display Size 376(H) x 301(V) mm Pixel Pitch 0.294(H) x 0.294(V) mm Display Mode CGA 512 x 247 (60Hz) CGA 512 x 256 (60Hz VGA 640 x 350 (70Hz) VGA 720 x 400 (70Hz) VGA 640 x 480 (60 / 72/ 75Hz) SVGA 800 x 600 (56 / 6...
Page 30 - II. Emissions and Immunity Information
26 R EGULATORY I NFORMATION I. Electrical Safety Information: A) Compliance is required with respect to the voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified herein will likely result in improper operation,...
Page 32 - III. Agency Certifications
28 III. Agency Certifications The following certifications have been issued for this monitor: • Australia C-Tick • Canada cUL • Canada IC • China CCC (Asia models only) • China RoHS (Asia models only) • Europe CE • Japan VCCI • United States FCC • United States UL • Argentina S-mark • Sweden MPR II ...
Page 33 - ARRANTY
29 W ARRANTY Except as otherwise stated herein or in an order acknowledgment delivered to Buyer, Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship. The warranty for the touchmonitors and components of the product is 3 (three) years. Seller makes no warra...
