Elo ET1724L-7SWB-1-NL - Manual

2-3 C H A P T E R 2 C HAPTER 2 I NSTALLATION AND S ETUP This chapter discusses how to setup your LCD desktop touchmonitor and how to install Elo TouchSystems driver software. Unpacking Your Touchmonitor AC/DC Power adapter US power cord Video cable Serial touchscreen cable CD and Quick Installation ...

2-4 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Rear View

2-5 Connecting Your Touchmonitor Before connecting the cables to your touchmonitor and computer, be sure that the touchmonitor and computer are off. Video Cable Connection 1 Set the touchmonitor on a solid horizontal surface, such as a table or desk. 2 Connect the female end of the video cable conne...

2-6 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Touchscreen Cable Connection 1 Connect the female end of the 9-pin touchscreen RS-232 cable to the serial port on the back of your computer. 2 Connect the male end of the cable to the serial touchscreen connector on your touchmoni...

2-7 Power Cable Connection 1 Depending on where you live, you will use either the European or US/Canadian power cable. Connect the female end of the power cable to the Brick power supply. 2 Connect the Brick power supply into the power port on the touchmonitor. To protect your equipment against risk...

2-8 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Video Input Pin Assignment This section describes the pin assignment of the LCD’s 15 Pin Mini D-sub (video cable) connector. Pin No. Signal Connector 1 Red Video Signal 2 Green Video Signal 3 Blue Video Signal 4 N.C. 5 Ground 6 Gr...

2-9 Installing the Driver Software The driver software allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD-ROM for the following operating systems: • Windows XP • Windows 2000 • Windows Me • Windows 98 • Windows 95 • Windows NT 4.0 Your touchmonitor is plug-an...

3-13 C H A P T E R 3 C HAPTER 3 O PERATION Variations in video output and application will likely require you to adjust your touchmonitor to optimize the quality of the display. For best performance, your monitor should be operating in native resolution; that is, 1280 x 1024 at 60 Hz. Use the Displa...

3-14 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Touchmonitor Controls Setting the Refresh Rate Follow the instructions below to set your refresh rate in Windows 98. 1 Go to the configuration window (Start>Settings>Configuration window). 2 Double-click on the Display icon...

3-15 Adjustments All adjustments are made using the on-screen display (OSD) controls. Figure 3.1 Touchmonitor Controls Control Function Power Press the power key to turn the monitor on. Press it again to turn the monitor off. Menu Activate the OSD adjustment menu. Move from the submenu back to the p...

3-16 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Screen Adjustments The setting switches are normally in stand-by mode. 1 Push the MENU button once to display the OSD screen. The resolution and frequency are displayed at the top of the menu box. 2 Push the or button to select t...

3-18 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e OSD and Power Lock/Unlock 1 Press the MENU and Power button together for 2 or 3 seconds. 2 Press the MENU button and select the PL icon. 3 Select Yes. 4 Power the monitor off then on. 5 Press the MENU and Power button. The status...

3-19 OSD Adjustments The OSD adjustments available are listed below. BRIGHTNESS Adjusts the brightness of the screen. CONTRAST Contrast allows you to adjust the difference between black and white shades for image sharpness. COLOR CONTROL Color temperature affects the tint of the image. With lower co...

3-20 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e AUTO ADJUST Adjusts the shape of the screen automatically at the full screen pattern. LANGUAGE Select the language in which adjustment menus are displayed. The following languages are available: English, French, German, Italian, ...

4-21 C H A P T E R 4 C HAPTER 4 T ROUBLESHOOTING T IPS If you are experiencing trouble with your touchmonitor, refer to the following table. If the problem persists, please contact your reseller or our technical support at 1-800-557-1458. Problem Suggestion(s) No image appears on screen. Check that ...

A-23 A P P E N D I X A C HAPTER 4 N ATIVE R ESOLUTION The native resolution of a monitor is the resolution at which the LCD panel is designed to perform best. In almost all cases, screen images look best when viewed at their native resolution. You can lower the resolution setting of a monitor but no...

B-25 A P P E N D I X B C HAPTER 4 T OUCHMONITOR S AFETY This manual contains information that is important for the proper setup and maintenance of your touchmonitor. Before setting up and powering on your new touchmonitor, read through this manual, especially Chapter 2 (Installation), and Chapter 3 ...

B-27 Care and Handling of Your Touchmonitor The following tips will help keep your Elo Entuitive touchmonitor functioning at the optimal level. • To avoid risk of electric shock, do not disassemble the brick supply or display unit cabinet. The unit is not user serviceable. Remember to unplug the dis...

C-29 A P P E N D I X C C HAPTER 4 T ECHNICAL S PECIFICATIONS Preset Timing Table Your Elo Entuitive touchmonitor is compatible with the following standard video modes. All specifications are typical and subject to change. Table C.1 Analog R.G.B. Input. Number Resolution Horizontal Frequency 1 720 x ...

C-30 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e VESA Mounting This display unit supports VESA FPMPMI standard for 100mmx100mm screw mounting by giving four screw holes inside the base stand of the unit. The base stand must be removed before connecting to the Speciality Flat Pa...

C-31 Touchmonitor Specifications Display Type 17” TFT Recom mendedResolution 1280 x 1024@60Hz Maximum Resolution Analog RGB: 1280x1024@75Hz Frequency Rate Horizontal: 31.0 to 80.0KHz Vertical: 56 to 75Hz Maximum Bandwidth 135 MHz Display area 337.92 x 270.336 mm LCD display color 16.7M Colors max. O...

C-32 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e AccuTouch Touchscreen Specifications See http:/www.elotouch.com/products/accutec/accuspec.asp for complete and updated specifications. Mechanical Positional Accuracy Standard deviation of error is less than 0.080 in. (2.03 mm). E...

C-33 IntelliTouch Touchscreen Specifications See http://www.elotouch.com/products/inteltec/intelspec.asp for complete and updated specifications. Mechanical Positional Accuracy Standard deviation of error is less than 0.080 in. (2.03 mm). Equates to less than ±1%. Touchpoint Density More than 100,00...

37 C HAPTER 4 R EGULATORY I NFORMATION I. Electrical Safety Information: A) Compliance is required with respect to the voltage, frequency, and currentrequirements indicated on the manufacturer’s label. Connection to a differentpower source than those specified herein will likely result in improper o...

I n d e x - 4 1 Numerics 17" LCD Desktop Touchmonitor (ET1724L-XSWB-1) Dimensions, 34 A About the Product, 1AccuTouch Touchscreen Specifications, 32Adjustments, 15AUTO ADJUST, 20Auto Adjust, 16 B BRIGHTNESS, 19 C Care and Handling of Your Touchmonitor, 27Chemical Resistance, AccuTouch, 32Chemica...