Elo SW 601075 - Manual

B-S ERIES T OUCHCOMPUTER U SER G UIDE 1 C H A P T E R 1 SETUP This chapter discusses how to set up and test your touchcomputer. For information on peripheral options, refer to Chapter 3, “Options and Upgrades.” Unpacking Your Touchcomputer Check that the following items are present and in good condi...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 2 Adjusting the Display The display screen can be adjusted from 0 to 70 degrees, as shown below. CAUTION: To prevent tipping or dropping, be sure to hold the base when adjusting the display. Setting Up the Operating System If configured with an operating system,...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 3 3. Click Customize . The Regional and Language Options window appears. Select the Languages tab. 4. If required, check the boxes for “Install files for complex script and right-to-left languages” and “Install files for East Asian languages.” 5. Select the Regi...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 4 7. Click Apply . 8. Select your location from the drop-down list in the Locations pane. 9. Click OK .

B-S ERIES T OUCHCOMPUTER U SER G UIDE 5 Selecting the Time Zone (For Windows XP and POSReady 2009 Only) When the following window appears, you can change the time zone, date, and time of the touchcomputer. After making any changes, click Next to finish. Windows Setup completes the installation of th...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 6 5. Click Inject , and the following window will pop out. 6. Click the drop-down list and select the preference language. 7. Click Inject Selected Language 8. The following window will be presented:

B-S ERIES T OUCHCOMPUTER U SER G UIDE 7 9. After the language package is installed correctly, press any key to exit this window. 10. Click Exit Æ Exit Æ Restart Selecting the Region (For Windows 7 Only) When the following window appears, you can change the country, time and currency, and keyboard la...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 8 Choosing the Computer Name (For Windows 7 Only) When the following window appears, you can choose a computer name of the touchcomputer. After making any changes, click Next to continue. Selecting the Update Options (For Windows 7 Only) When the following windo...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 9 After making any changes, click Next to continue. Reviewing the Time and Date Settings (For Windows 7 Only) When the following window appears, you can set up the time and date of the touchcomputer. After making any changes, click Next to finish. Windows Setup ...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 10 Click the Align button. This launches the calibration program. The window shown below opens. Follow the instructions to calibrate the touchscreen.

B-S ERIES T OUCHCOMPUTER U SER G UIDE 11 Securing the Base When mounting the B-Series touchcomputer, the baseplate must be removed and mounted on a flat surface. Use the four pre-tapped holes to secure the baseplate from below the mounting surface before reattaching the touchcomputer as shown below....

B-S ERIES T OUCHCOMPUTER U SER G UIDE 12 C H A P T E R 2 OPERATION This chapter describes how to control the On-Screen Display (OSD), power buttons, and I/O panel. All adjustments made to the OSD and power controls are automatically saved. User settings remain unchanged after powering off/on or in t...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 13 On-Screen Display (OSD) OSD Menu 1. To display the OSD Menu, press the Menu button. Press the RIGHT button or LEFT button to toggle and the SELECT button to select from the different OSD sub-menus and functions. 2. When the function you want to change is show...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 14 Feature Description Image setting Adjusts H position, V position, clock, and phase. • H position: Moves the screen horizontally right and left (1 pixel pitch increment). • V position: Moves the screen vertically up and down (1 line increment). • Clock: Adjust...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 16 Using the Input/Output Panel To access the input/output (I/O) ports, remove the cable cover at the bottom of the unit. A security screw is included and may be used to secure the cable cover to the touchcomputer. Below are the I/O descriptions by model: B1 and...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 17 C H A P T E R 3 OPTIONS AND UPGRADES Adding Optional Peripherals When adding a peripheral, complete installation and setup instructions are provided with the field-installable kits. The following peripherals are available for purchase separately as field-inst...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 18 Magnetic Stripe Reader (MSR) You can add a magnetic stripe reader (MSR) to the B-Series touchcomputer to any of the 4 mounting locations located on the display head top, bottom, left, and right. Software application and drivers can be found in the following d...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 19 Testing in USB MSR Human Interface Device (HID) Mode 1. Double-click the MagSwipe HID Demo icon to start the test application. 2. Slide a card through the MSR and verify that the data is displayed in the application window.

B-S ERIES T OUCHCOMPUTER U SER G UIDE 20 3. If the card ID appears in the Reader Output window, the reader is functioning. Customer Display You can optionally add a customer display to the B-Series touchcomputer to any of the four mounting locations located on the display head top, bottom, left, and...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 21 Fingerprint Reader (FPR) You can add a fingerprint reader to the B-Series touchcomputer to any of the four mounting locations located on the display head top, bottom, left, and right. Software application and drivers can be found in the following directory or...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 22 Cash Drawer Port Card A Cash Drawer Port Card can be installed in any available expansion slot. This card provides: • 1 x 12V or 24V selectable cash drawer RJ11 port. The voltage setting can be set via jumper on the card prior to installing into the touchcomp...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 23 C:\EloTouchSystems\Peripherals Part number: E017487 Wireless Adapter A wireless adapter can be installed as an option in the B-Series touchcomputer in the I/O area under the cable cover. Typical specifications for the wireless adapter are: • USB dongle module...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 24 Second Hard Disk Drive A second hard disk drive can be added via the second hard drive mounting kit. This addition provides extra data storage or can be used in conjunction with the RAID controller card for RAID functionality. This option occupies a single ex...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 25 Parallel Port Card A parallel port card can be added to any Expansion slot. This option provides a parallel port for printer interfaces only. Software drivers can be found in the following directory or on www.elotouch.com : C:\EloTouchSystems\Peripherals Part...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 26 C H A P T E R 4 SAFETY AND MAINTENANCE Safety Important information regarding the proper setup and maintenance of your touchcomputer: • To reduce the risk of electric shock, follow all safety notices and never open the touchcomputer case. • Turn off the produ...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 27 Care and Handling The following tips help keep your touchcomputer functioning at the optimal level. To avoid risk of electric shock, do not disassemble the power adapter or display unit cabinet. The unit is not user serviceable. Remember to unplug the display...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 28 WEEE Directive In the European Union, the Waste Electrical and Electronic Equipment (WEEE) directive label shown to the left indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility for reco...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 29 Recovering the Operating System If for any reason the touchcomputer’s operating system and software need to be recovered TO FACTORY SETTINGS, there are two ways you can recover your system: I) Use the Elo recovery utility (included in POSReady 2009,Windows 7,...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 31 5. Click Recover Æ Start Recovery Process 6. Once completed, click Exit Recovery Process Æ Exit . The system will restart automatically.

B-S ERIES T OUCHCOMPUTER U SER G UIDE 32 OR II) Use the Elo recovery DVD (Some Windows XP versions include a recovery DVD; for these systems there is no recovery partition on the HDD, so you must follow the following procedure to recovery the system. Some Windows XP versions, and ALL POSReady 2009 a...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 33 6. Once you see the “ Command Prompt ” window to start the recovery process type: • “ pos9 ” to start the recovery process for POSReady 2009/Windows XP. * Note: I f your system came with Windows XP, it will automatically be re-installed; if your system came w...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 35 Reassigning COM Ports after System Recovery (The   section   is   required   once   you   recovered   your   system   either   from   recovery   partition   or   DVD)   • Instructions   to   reassign   the   USB   Serial   Port(s)   1. For   POSReady   2009, ...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 36     2. Double   click   the   “Ports   (COM   &   LPT)”   and   verify   that   all   of   the   “USB   Serial   Port”   settings   are   IDENTICAL   to   the   following   table:     Description   Location   USB   Serial   Port   (COM3)   On   USB   Seri...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 40   After   completing   the   above   steps,   right   click   on   “ Ports   (COM   &   LPT) ”   and   click   Scan   for   hardware   changes.         5. This   should   result   in   the   following   assignments:        • If   not,   please   repeat   ...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 42 C H A P T E R 5 TECHNICAL SUPPORT Technical Assistance There are three methods to obtain contact information for technical assistance on the touchcomputer: • The touchcomputer • The web • The phone Using the Touchcomputer You can access support information in...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 43 Using the Phone For technical support, see the table at the end of the user guide for contact information.

B-S ERIES T OUCHCOMPUTER U SER G UIDE 44 REGULATORY INFORMATION I. Electrical Safety Information A) Compliance is required with respect to the voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified herein may re...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 46 iv) Plug the digital device into a different AC outlet so the digital device and the receiver are on different branch circuits. v) Disconnect and remove any I/O cables that the digital device does not use. (Unterminated I/O cables are a potential source of hi...

B-S ERIES T OUCHCOMPUTER U SER G UIDE 47 WARRANTY Except as otherwise stated herein or in an order acknowledgment delivered to Buyer, Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship. With the exception of the negotiated warranty periods; the warranty f...