Elo ET1546L-XXWA-X - Manual

2-4 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Product Overview Main Unit Rear View 75.0[2.95] 75.0[2.95] LCD Display Detachable mounting L-brackets

2-5 Bottom View/Side View Power Connector Video Cable (analog) connector Remote OSD connector Touch interface connector(serial or USB) Power switch

2-6 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Attaching the L-Brackets Depending on your mounting scheme, use the L-brackets or the VESA 75mm standard holes located on the back of the kiosk monitor. See page 15 for VESA mounting information. N OTE : You will need a screwdrive...

2-7 Touch Interface Connection N OTE : Your interface cables may have been pre-connected to your monitor at the factory. Your touchmonitor comes with one of the following touchscreen connector cables: Serial (RS-232) cable or USB cable (For Windows 98 or Windows 2000 computers only.) To setup this d...

2-8 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Connecting the Video Cable • Connect the 15-pin video cable to the video port on your PC. • Connect the other end of the video cable to the video connector on your touchmonitor. • Secure the cable to your touchmonitor and PC by tu...

2-9 Connecting the Serial Touchscreen Cable • Connect the female end of the serial (RS-232) cable to the serial port on the back of your PC. • Connect the male end of the cable to the serial touchscreen connector on your touchmonitor. • Secure the cable to your touchmonitor and PC by turning the scr...

2-10 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Connect the Remote OSD Cable • Connect the 6 pin DIN cable to the OSD Remote port on your touchmonitor. Connections on underside remoteOSDport Videocable Videoport Ferrite bead

2-11 Connecting the Power Cable Depending on where you live, you will use either the European or US/Canadian power cable. • Connect the female end of the power cable into the power port on the touchmonitor. N OTE : To protect your equipment against risk of damage from electrical surges in the power ...

2-12 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e USB Connection N OTE : A USB connection can only be used if your PC is running Windows 98 or Windows 2000. The following illustrations guide you step by step in connecting your touchmonitor using a USB cable connection. Before co...

2-14 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Connecting the USB Touchscreen Cable • Connect the USB touchscreen cable to the USB touchscreen connector on the touchmonitor. • Connect the other end of the USB cable to your PC. • The touchscreen cable connectors should fit snu...

2-15 Connecting the Remote OSD Cable • Connect the 6 pin DIN cable to the OSD Remote port on your touchmonitor. Connections on underside remoteOSDport

2-18 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Installing the Driver Software Elo TouchSystems provides driver software that allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD-ROM for the following operating systems: • Windows XP • Win...

2-19 Installing the Serial Touch Driver for Windows XP, Windows 2000 1 , Me, 95/98 and NT 4.0 N OTE : For Windows 2000 and NT 4.0 you must have administrator access rights to install thedriver. 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. If the AutoStart feature for your CD-ROM drive is...

2-20 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Installing the Serial Touch Driver for MS-DOS and Windows 3.1 To install Windows 3. x and MS-DOS from Windows 95/98, follow the directions below: 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. 2 From DOS, type d:\EloDos...

2-21 Installing the USB Touch Driver Installing the USB Touch Driver for Windows 98 and Windows 2000 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. If Windows 98 or Windows 2000 starts the Add New Hardware Wizard: 2 Choose Next . Select “Search for the best driver for your device (Recommen...

3-23 C H A P T E R C HAPTER 3 O PERATION About Touchmonitor Adjustments Your touchmonitor will likely require adjustment. Variations in video output and application will require you to adjust your touchmonitor to optimize the quality of the display. For best performance, your monitor should be opera...

3-24 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Remote OSD Buttons 4 3 2 1 AUTO/SEL DOWN UP MENU AUTO/SEL DOWN UP MENU 5 Control Function MENU Menu Contrast/Plus/Clockwise 1. Enter contrast of the OSD2. Increase value of the adjustment item.3. Select item clockwise Brightness/...

3-25 OSD Menu Function Brightness Controls the picture brightness Phase/Clock Controls the horizontal image size Controls vertical and horizontal fine tuning Contrast Controls the picture contrast Auto Adjust Automatically selects the optional setings for image parameters (brightness, contrast, imag...

4-27 C H A P T E R C HAPTER 4 T ROUBLESHOOTING If you are experiencing trouble with your touchmonitor, refer to the following table. If the problem persists, please contact your local dealer or our service center. Solutions to Common Problems Problem Suggestion(s) No image appears on screen. Check t...

A-29 A P P E N D I X C HAPTER 4 N ATIVE R ESOLUTION The native resolution of a monitor is the resolution level at which the LCD panel is designed to perform best. For the Elo LCD touchmonitor, the native resolution is 1024 x 768 for the XGA-15 inch size. In almost all cases, screen images look best ...

B-31 A P P E N D I X C HAPTER 4 T OUCHMONITOR S AFETY This manual contains information that is important for the proper setup and maintenance of your touchmonitor. Before setting up and powering on your new touchmonitor, read through this manual, especially Chapter 2 (Installation), and Chapter 3 (O...

B-32 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Care and Handling of Your Touchmonitor The following tips will help keep your Elo Entuitive touchmonitor functioning at the optimal level. • To avoid risk of electric shock, do not disassemble the brick supply or display unit cab...

C-33 A P P E N D I X C HAPTER 4 T ECHNICAL S PECIFICATIONS Compatibility Modes Your Elo Entuitive touchmonitor is compatible with the following video modes: Mode Resolution H. Frequency (kHz) V. Frequency (Hz) IBM & VESA VGA 720 x 400 31.47 70.09 IBM & VESA VGA 640 x 480 31.47 59.94 IBM &...

C-34 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Touchmonitor Specifications ET1546L Table C.1 15" LCD Touchmonitor Specifications Display Type Active matrix, thin film transistor (TFT), liquid crystal display Size 15-inch diagonal 304 x 228 mm useful screen area Pixel Form...

C-36 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e 15 " LCD Touchmonitor Dimensions ET1546L 370 120 130 305 229 296 150 286 4.3 4X 9 439 380 328

C-38 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Cut Out Dimensions ET1546L Rear Mount Plate Cut Out 4X Customer Option See notes 440 314.0 +1.0 0 157 4X R4.00 70 119 238.0 +1.0 0 NOTES: Material: 1. W ood: Ø4.5 holes thru for M4 screws w/nutsor screws for wood Ø4 mm. 2. Sheet ...

41 C HAPTER 4 W ARRANTY Except as otherwise stated herein or in an order acknowledgment delivered to Buyer, Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship. The warranty for the touchmonitors and components of the product is 1 year. Seller makes no war...

43 C HAPTER 4 R EGULATORY I NFORMATION I. Electrical Safety Information: A) Compliance is required with respect to the voltage, frequency, and currentrequirements indicated on the manufacturer’s label. Connection to a differentpower source than those specified herein will likely result in improper o...

I n d e x - 4 7 Numerics 15" LCD Touchmonitor Dimensions 3615” LCD Touchmonitor (ET15-XXWC-1) Specifications 34 A About the Product 1About Touchmonitor Adjustments 23Attaching the L-Brackets 6Auto Adjust 25 B Bottom View/Side View (1545L) 5Brightness 25 C Care and Handling of Your Touchmonitor 3...