Elo 1925L Series - Manual

2-3 C H A P T E R 2 C HAPTER 2 I NSTALLATION AND S ETUP This chapter discusses how to install your LCD touchmonitor and how to install Elo TouchSystems driver software. Unpacking Your Touchmonitor Check that the following 10 items are present and in good condition: LCD Display User Guide-on CD,Quick...

2-4 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Product Overview Main Unit Rear View LCD Display Stand Bottom cut-out

2-5 Side View Base Bottom View 72.2 100.0 69.2 100.0 User Controls Menu Select

2-6 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Touch Interface Connection N OTE : Your interface cables may have been pre-connected to your monitor at the factory. Your touchmonitor comes with one of the following touchscreen connector cables: Serial (RS-232) cable or USB cabl...

2-8 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Step 1-Routing the Cables • The cables are routed through the cable management channel in the stand.

2-9 Step 2-Connecting the Video Cables • Tilt the screen up and back to access the connection ports. • Connect the 15-pin video cable (the ferrite bead end), the 24-pin DVI-D cable, the RCA or the S-Video cable to the video port on your PC. • Connect the other end of the video cable to the video con...

2-10 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Step 3-Connecting the Serial or USB Touchscreen Cable • Connect the female end of the serial (RS-232) cable to the serial port on the back of your PC, or connect the USB touchscreen cable to the USB touchscreen connector on the b...

2-11 Step 4-Connecting the Speaker Cable N OTE : If you do not wish to connect the speaker cable, go to step 5. • To use the built in speakers, you need to connect the speaker cable. Connect the speaker cable to the speaker port inside the back of your touchmonitor. • Connect the other end of the ca...

2-12 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Tilt Lock Function You are able to lock the monitor in a desired position. • Pivot the monitor to the desired position. • Rotate the knob one full turn clockwise to lock the monitor in position. • Rotate the knob one full turn co...

2-13 VESA Mount on Your Touchmonitor Your touchmonitor conforms to the VESA Flat Panel Monitor Physical Mounting Interface (FPMPMI™) Standard which defines a physical mounting interface for flat panel monitors, and corresponding standards for flat panel monitor mounting devices, such as wall and tab...

2-14 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Rear Mount Template Front Mount Template • Remove the two screws holding the front cover to the stand (see Figure 3). • Route the cables through the cutout (if applicable) and mount the monitor to a horizontal surface using the t...

2-15 Front Mount for Horizontal Surface The following companies provide VESA mounting devices compatible with your touchmonitor: Ergotron 800-888-8458 651-681-7600 www.ergotron.com Innovative Office Products 800-524-2744 610-253-9554 www.innov-office-prod.com GCX 800-228-2555 707-773-1100 www.gcx.co...

2-16 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Mounting the Base You can also mount your touchmonitor by using the keyholes in the base of the stand. These keyholes provide easy slide on mounting. You can also bolt your touchmonitor to a tabletop or other flat surface. Please...

2-17 Security You can protect your touchmonitor from theft by locking it with a Kensington Lock. See figure 2.5 for details. Figure 2.5 Kensington Cable Lock Kensington Lock Detail Lock recepticalin the back cover Kensington Cable Lock

2-18 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Installing the Driver Software Elo TouchSystems provides driver software that allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD-ROM for the following operating systems: • Windows XP • Win...

2-19 Installing the Serial Touch Driver for Windows XP, Windows 2000 1 , Me, 95/98 and NT 4.0 N OTE : For Windows 2000 and NT 4.0 you must have administrator access rights to install thedriver. 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. If the AutoStart feature for your CD-ROM drive is...

2-20 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Installing the Serial Touch Driver for MS-DOS and Windows 3.1 You must have a DOS mouse driver (MOUSE.COM) installed for your mouse if you wish to continue using your mouse along with your touchmonitor in DOS. To install Windows ...

2-21 Installing the USB Touch Driver Installing the USB Touch Driver for Windows XP, Windows 2000 2 , Me and 98 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. If Windows 98, Windows Me or Windows 2000 starts the Add New Hardware Wizard: 2 Choose Next . Select “Search for the best driver fo...

3-23 C H A P T E R 3 C HAPTER 3 O PERATION About Touchmonitor Adjustments Your touchmonitor will unlikely require adjustment. Variations in video output and application may require adjustments to your touchmonitor to optimize the quality of the display. For best performance, your touchmonitor should...

3-24 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Side Bezel Buttons Control Function MENU Menu Display on exit the OSD menus. Contrast/Up/Toggle 1. Shortcut to Contrast adjustment2. Increase value of adjustment items3. With menu on toggles OSD options Volume/Down Toggle 1. Shor...

3-25 OSD Menu Function C O N T R A S T 5 0 Contrast Controls the picture contrast Phase Controls the vertical fine adjustment Brightness Controls the picture brightness Clock Controls the horizontal fine adjustment V-Position Controls the vertical position OSD H-Position Adjusts the horizontal posit...

4-27 C H A P T E R 4 C HAPTER 4 T ROUBLESHOOTING If you are experiencing trouble with your touchmonitor, refer to the following table. If the problem persists, please contact your local dealer or our service center. Solutions to Common Problems Problem Suggestion(s) No image appears on screen. Check...

A-29 A P P E N D I X A C HAPTER 4 N ATIVE R ESOLUTION The native resolution of a monitor is the resolution level at which the LCD panel is designed to perform best. For the Elo LCD touchmonitor, the native resolution is 1280 x 1024 for the SXGA-19 inch size. In almost all cases, screen images look b...

B-31 A P P E N D I X B C HAPTER 4 T OUCHMONITOR S AFETY This manual contains information that is important for the proper setup and maintenance of your touchmonitor. Before setting up and powering on your new touchmonitor, read through this manual, especially Chapter 2 (Installation), and Chapter 3 ...

B-32 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Care and Handling of Your Touchmonitor The following tips will help keep your Elo Entuitive touchmonitor functioning at the optimal level. • To avoid risk of electric shock, do not disassemble the brick supply or display unit cab...

C-33 A P P E N D I X C C HAPTER 0 T ECHNICAL S PECIFICATIONS Compatible Video Modes Your Elo Entuitive touchmonitor is compatible with the following standard video modes: Mode Resolution H. Frequency (kHz) V. Frequency (Hz) IBM & VESA VGA 640 x 350 31.47 70.09 IBM & VESA VGA 640 x 400 31.47 ...

C-34 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Touchmonitor Specifications TABLE 1. 19" LCD Touchmonitor (ET19-XXxx-1) Specifications Display Type Active matrix TFT LCD Display Size 19-inch diagonal Useful Screen Area Horizontal: 376 mm (14.8 in.) Vertical: 301 mm (11.9 i...

43 C HAPTER 0 R EGULATORY I NFORMATION I. Electrical Safety Information: A) Compliance is required with respect to the voltage, frequency, and currentrequirements indicated on the manufacturer’s label. Connection to a differentpower source than those specified herein will likely result in improper o...

47 C HAPTER 0 W ARRANTY Except as otherwise stated herein or in an order acknowledgment delivered to Buyer, Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship. The warranty for the touchmonitors and components of the product is 1 year. Seller makes no war...

I n d e x - 4 9 Numerics 19" LCD Touchmonitor (ET19-XXWA-1) Dimensions, 39 A About the Product, 1About Touchmonitor Adjustments, 23AccuTouch Touchmonitor Specifications, 38Agencies, 35Auto Adjust, 25 B Back-light Lamp Life, 34Base Bottom View, 5Brightness, 25Brightness (typical), 34 C C1/C2/USER...