Elo 1729L - Manual

Appendix B Touchmonitor Safety 37 Care and Handling of Your Touchmonitor .......... 38 Appendix C Technical Specifications 39 Touchmonitor Specifications ......................... 40AccuTouch TouchscreenSpecifications ................................................ 41IntelliTouch TouchscreenSpecifi...

C H A P T E R 1 I NTRODUCTION Product Description The 1729L consists of a 17.0” LCD main display with a touchscreen and the following optional peripherals: customer display, vacuum fluorescent display (VFD), fingerprint reader, barcode scanner, magnetic stripe reader (MSR), speaker bar and a 6 port ...

Detailed LCD Display Performance Requirements 17 inch TFT LCD Display Panel Display Format 1280 x 1024 Display area 17” 337.92mm(H) x 270.336mm(V) Pixel Pitch 17” 0.264mm(H) x 0.264mm(V) Contrast Ratio 800:1 typical Brightness LCD 280 cd/m 2 (Typical) AccuTouch 224 cd/m 2 (Typical) IntelliTouch 258 ...

Customer Display The Customer Display is a twenty character two line vacuum fluorescent display (VFD). It consists of a VFD and VFD controller. USB Version Optional Parameters Characters per row 20 Number of rows 2 Character configuration 5x7 dot matrix Character Height 9.5mm Character width 6.2mm C...

Magnetic Stripe Reader The MSR is a USB 1.1 device which reads all three data stripes on standard credit cards or driver’s licenses conforming to ISO/ANSI standards. The MSR will have foreign language capability. The credit card is read by sliding the credit card through the MSR, stripe side toward ...

C H A P T E R 2 I NSTALLATION AND S ETUP This chapter discusses how to install your LCD touchmonitor and how to install Elo TouchSystems driver software. Unpacking Your Touchmonitor Check that the following items are present and in good condition: Touchmonitor USB Cable Video cable OR Power cable US...

Product Overview Main Unit Note: Shown with optional peripherals Rear View 2-8 Elo Touchmonitor User Guide

Kensington TM Lock The Kensington TM lock is a security device that prevents theft. To find out more about this security device, go to http://www.kensington.com. 2-12 Elo Touchmonitor User Guide

USB Interface Connection Your touchmonitor comes with only one touchscreen connector cables: USB cable. (For Windows 2000, Me and XP systems only.) To set up the display, please refer to the following figures and procedures: Remove the Cable Cover The cables are connected at the back of the monitor....

C AUTION Before connecting the cables to your touchmonitor and PC, be sure that thecomputer and touchmonitor are turned off. N OTE Before connecting the cables to the touchmonitor, route all the cables throughthe hole in the second as shown in the picture above. 2-14 Elo Touchmonitor User Guide

Connect one end of the power cord to the monitor and the other end to wall. Connect the power cable to the power port in the monitor. 2-15 CONNECTIONS ON UNDERSIDE POWER CABLE POWER POWER

Connect one end of the video cable to the rear side of computer and the other to the LCD. Tighten by turning the two thumb screws clockwise to ensure proper grounding. 2-16 Elo Touchmonitor User Guide CONNECTIONS ON UNDERSIDE VIDEO CABLE VIDEO PORT FEMALE 15-PIN VIDEO CONNECTOR

Connect one end of the speaker cable to the speaker port in the computer and the other end to the port in the monitor. 2-17 SPEAKER CABLE CONNECTIONS ON UNDERSIDE SPEAKER PORT

Connect one end of the USB cable to the rear side of the computer and the other to the LCD monitor. The USB cable is for optional touch, MSR, CD and Finger Print Reader. Only one USB cable is needed because the device contains a self powered USB 1.1 Hub. Two self powered ports are available for runn...

Replace the Cable Cover Then you have attached all the cables to the monitor, gently bring all the cables toward the standard so they fit under the cover lip. Snap the Cable cover in place over the connections. 2-19

Optimizing the LCD Display To ensure the LCD display works well with your computer, configure the display mode of your graphic card to make it less than or equal to 1280 x 1024 resolution, and make sure the timing of the display mode is compatible with the LCD display. Refer to Appen- dix A for more...

Barcode Scanner Driver Installation: 1. Insert your Elo TouchTools CD. 2. On the CD, browse to Touch Monitor Peripherals\Barcode Scanner Startup\Drivers. 3. Double-click on USB7210.msi and follow the prompts given by the setup file. 4. Once you have finished installing the above: Right click on My C...

The Scan Engine turns on the laser and is able to scan and decode barcodes con- tinuouslywithout the user having to press the trigger (momentary switch). When the Host Appli-cation software detects the DSR input HIGH (HE Switch is OFF), it sends a ‘LevelTrigger’ SSI command to the Symbol Scan Engine...

Customer Display Driver Installation: 1. Insert your Elo TouchTools CD. 2. On the CD, browse to Touch Monitor Peripherals\Rear Facing Customer Display\Drivers\USB Drivers. Click on the folder that has the name of your operating system for the necessary drivers. 3. Once in this folder, open up the zi...

Installing the Touch Driver Software Elo TouchSystems provides driver software that allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD-ROM for the following operat- ing systems: • Windows XP • Windows 2000 • Windows Me • Windows 98 • Windows 95 • Windows NT 4...

Installing the USB Touch Driver Installing the USB Touch Driver for Windows XP, Windows 2000, Me and 98 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. If Windows XP, Windows 2000,Windows 98, or Windows Me starts the Add New Hardware Wizard: 2 Choose Next . Select “Search for the best drive...

C H A P T E R 3 O PERATION About Touchmonitor Adjustments Your touchmonitor will unlikely require adjustment. Variations in video output and ap- plication may require adjustments to your touchmonitor to optimize the quality of the display. For best performance, your touchmonitor should be operating ...

17” LCD Function Key Controls Function 1 Power Switch Turns the display system power on or off . 2 Select Displays the OSD menus on the screen and used to select (“Clockwise” and “Counter-clockwise” direction) the OSD control options on the screen. 3 Adjusts the decreasing value of the selected OSD ...

Controls and Adjustment OSD Lock/Unlock You are able to lock and unlock the OSD feature. The monitor is shipped in the unlocked position. To lock the OSD: 1 Press the Menu button and button simultaneously for 2 seconds. A window will appear displaying “OSD Unlock”. Continue to hold the buttons down ...

OSD Control Options Brightness • Background Luminance of the LCD panel is adjusted. Contrast • Adjusts the contrast or the values of color gain (RED, GREEN or BLUE). V-Position • Moves the screen up or down. H-Position • Moves the screen left or right. Recall Defaults • All data copy from factory sh...

Power-Save (No Input) • The LCD panel background is cut when there is no signal input (AC line power consumption of 4w or less). Power LED Display & Power Saving General Power Saving Mode When the power switch are switch on , this LED lights in green . The LED indicates the different power statu...

CAUTION In order to protect the LCD, be sure to hold the base when adjusting the LCD,and take care not to touch the screen. 3-32 Elo Touchmonitor User Guide

C H A P T E R 4 T ROUBLESHOOTING If you are experiencing trouble with your touchmonitor, refer to the following table. If the problem persists, please contact your local dealer or our service center. Elo Techni- cal Support numbers are listed on the last page of this manual. Solutions to Common Prob...

A-35 C H A P T E R A N ATIVE R ESOLUTION The native resolution of a monitor is the resolution level at which the LCD panel is designed to perform best. For the Elo LCD touchmonitor, the native resolution is 1280 x 1024 for the SXGA-17 inch size. In almost all cases, screen images look best when view...

As an example, a SVGA resolution LCD panel has 800 pixels horizontally by 600 pixels vertically. Input video is also represented by the same terms. XGA input video has a format of 1024 pixels horizontally by 768 pixels vertically. When the input pixels con- tained in the video input format match the...

C H A P T E R B T OUCHMONITOR S AFETY This manual contains information that is important for the proper setup and maintenance of your touchmonitor. Before setting up and powering on your new touchmonitor, read through this manual, especially Chapter 2 (Installation), and Chapter 3 (Operation). 1 To ...

Care and Handling of Your Touchmonitor The following tips will help keep your Elo touchmonitor functioning at the optimal level. • To avoid risk of electric shock, do not disassemble the brick supply or display unit cabinet. The unit is not user serviceable. Remember to unplug the display unit from ...

C H A P T E R C T ECHNICAL S PECIFICATIONS Display Modes Your Elo touchmonitor is compatible with the following standard video modes: Item Resolution Type H. Scan(KHz) V. Scan(Hz) Pol. 1 640 x 350 VGA 70Hz 31.47 28.322 2 720 x 400 VGA 70Hz 31.47 28.322 3 640 x 480 VGA 60Hz 31.47 25.175 4 640 x 480 M...

Touchmonitor Specifications Model 1729L LCD Display 17.0” TFT Active Matrix Panel Display Size 337.92(H) x 270.336(V) mm Pixel Pitch 0.264(H) x 0.2647(V) mm Display Mode VGA 640 x 350 (70 Hz) VGA 720 x 400 (70 Hz) VGA 640 x 480 (60 / 72 / 75 Hz) SVGA 800 x 600 (56 / 60 / 72 / 75Hz) XGA 1024 x 768 (6...

AccuTouch Touchscreen Specifications MECHANICAL Construction Top: Polyester with outside hard-surface coating with clear or antiglare finish. Inside: Transparent conductive coating. Bottom: Glass substrate with uniform resistive coating. Top and bottom layers separated by Elo-patented separator dots...

IntelliTouch Touchscreen Specifications MECHANICAL Positional Accuracy Standard deviation of error is less than 0.080 in. (2.03 mm). Equates to less than ±1%. Touchpoint Density More than 100,000 touchpoints/in2 (15,500 touchpoints/cm2). Touch Activation Force Typically less than 3 ounces (85 grams)...

Infrared Touchscreen Specifications MECHANICAL Input Method Input Method Finger or gloved hand activation Electrical Positional Accuracy Typical centroid accuracy: 2 mm with 1 mm STD error Resolution Touchpoint density is based on controller resolution of 4096 x 4096 Touch Activation Force No minimu...

C-44 Elo Touchmonitor User Guide Acoustic Pulse Recognition Specification MECHANICAL Input method Finger, finger nail, gloved hand, or stylus activation ELECTRICAL Position accuracy 1% max. error Resolution accuracy Touchpoint density is based on controller resolution of 4096 x 4096 Touch activation...

R EGULATORY INFORMATION I. Electrical Safety Information: A) Compliance is required with respect to the voltage, frequency, and current require- ments indicated on the manufacturer’s label. Connection to a different power source than those specified herein will likely result in improper operation, d...

This Information Technology Equipment (ITE) is required to have a CE Mark on the manufacturer’s label which means that the equipment has been tested to the following Directives and Standards: This equipment has been tested to the requirements for the CE Mark as required by EMC Directive 89/336/EEC i...

49 "The application of this monitor is restricted to special controlled luminous environments.The screen surface trend to reflect annoying light of lamps and sunlight. To avoid these reflections the monitor should not be positioned in front of a window or directed to luminaries. The monitor is i...

W ARRANTY Except as otherwise stated herein or in an order acknowledgment delivered to Buyer, Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship. With the exception of the negotiated warranty periods; the warranty for the touchmonitor and components of th...

THESE REMEDIES SHALL BE THE BUYER’S EXCLUSIVE REMEDIES FOR BREACH OF WARRANTY. EXCEPT FOR THE EXPRESS WARRANTY SET FORTH ABOVE, SELLER GRANTS NO OTHER WARRANTIES, EXPRESS OR IMPLIED BY STATUTE OR OTHERWISE, REGARDING THE PRODUCTS, THEIR FITNESS FOR ANY PURPOSE, THEIR QUALITY, THEIR MERCHANTABILITY, ...

Numerics 17.0" LCD Touchmonitor (1729L-XXWA-1-XX-G)Dimensions, 45 A About Touchmonitor Adjustments, 27AccuTouch Touchscreen Specifications, 41Acoustic Pulse Recognition Specification, 44Auto Adjust, 30 B Barcode Scanner, 4,24Base Bottom View, 9Brightness, 30 C Care and Handling of Your Touchmoni...

© 2007 Elo T ouchSyste ms Inc. Printed in USA Check out Elo TouchSystems Web site! www.elotouch.com Get the latest... • Product information • Specifications • News on upcoming events • Press release • Software drivers Getting in Touch with Elo To find out more about Elo’s extensive range of touch so...