Elo 15D1 - Manual

15D1 T OUCHCOMPUTER U SER G UIDE 1 C H A P T E R 1 SETUP This chapter discusses how to set up and test your touchcomputer. For information on peripheral options, refer to Chapter 3, “Options and Upgrades.” Unpacking Your Touchcomputer Check that the following items are present and in good condition:...

15D1 T OUCHCOMPUTER U SER G UIDE 2 Adjusting the Display The display screen can be adjusted from 0 to 60 degrees, as shown below. CAUTION: To protect the LCD, be sure to hold the base when adjusting the display, and take care to not touch the screen. Setting Up the Operating System The initial setup...

15D1 T OUCHCOMPUTER U SER G UIDE 3 3. Click Customize . The Regional and Language Options window appears. Select the Languages tab. 4. If required, check the boxes for “Install files for complex script and right-to-left languages” and “Install files for East Asian languages.” 5. Select the Regional ...

15D1 T OUCHCOMPUTER U SER G UIDE 4 7. Click Apply . 8. Select your location from the drop-down list in the Locations pane. 9. Click OK .

15D1 T OUCHCOMPUTER U SER G UIDE 5 Selecting the Time Zone When the following window appears, you can change the time zone, date, and time of the touchcomputer. After making any changes, click Next to finish. Windows Setup completes the installation of the touchcomputer. Testing Peripherals The touc...

15D1 T OUCHCOMPUTER U SER G UIDE 6 Click the Align button. This launches the calibration program. The window shown below opens. Follow the instructions to calibrate the touchscreen.

15D1 T OUCHCOMPUTER U SER G UIDE 7 Securing the Base There are two mounting options for the 15D1 touchcomputer. In both cases, the base must be mounted on a horizontal surface. • Option 1: Secure from below. Use the four pretapped holes to secure the touchcomputer from below the mounting surface. Th...

15D1 T OUCHCOMPUTER U SER G UIDE 9 C H A P T E R 2 OPERATION This chapter describes how to control the On-Screen Display (OSD), power buttons, and I/O panel. All adjustments made to the OSD and power controls are automatically saved. User settings remain unchanged after powering off/on or in the cas...

15D1 T OUCHCOMPUTER U SER G UIDE 10 On-Screen Display (OSD) OSD Menu 1. To display the OSD Menu, press the Menu button. Press the RIGHT button or LEFT button to toggle and the SELECT button to select from the different OSD sub-menus and functions. 2. When the function you want to change is shown, pr...

15D1 T OUCHCOMPUTER U SER G UIDE 11 Feature Description Language Changes language to English, French, Italian, German, Spanish, Japanese, Simplified Chinese, or Traditional Chinese. Recall Sets color recall and recall defaults. Restores original factory settings. Miscellaneous Adjusts sharpness, ena...

15D1 T OUCHCOMPUTER U SER G UIDE 12 Head Power Status LED The head power status is indicated by a different LED, which is located at the lower edge of the head (#3 in figure on page 9). LED Color to Observer State Off No input power to head — Off mode Red Input power present, power switch off — Off ...

15D1 T OUCHCOMPUTER U SER G UIDE 13 Using the Input/Output Panel To access the input/output (I/O) ports, open the cable cover door on the left side of the unit, as shown below. The touchcomputer provides a number of input and output interfaces for connecting a wide variety of compliant devices as sh...

15D1 T OUCHCOMPUTER U SER G UIDE 16 C H A P T E R 3 OPTIONS AND UPGRADES Adding Optional Peripherals When adding a peripheral, complete installation and setup instructions are provided with the field-installable kits. The following peripherals are available in field-installable kits: • Magnetic stri...

15D1 T OUCHCOMPUTER U SER G UIDE 18 • Fully supports USB 2.0 • Elo part number E145919 Testing the MSR Testing in USB MSR Keyboard (KB) Emulation Mode 1. Open the Notepad application (click Start > Accessories > Notepad ). 2. Slide the card through the MSR and verify that the data is displayed...

15D1 T OUCHCOMPUTER U SER G UIDE 19 2. Slide a card through the MSR and verify that the data is displayed in the application window. 3. If the card ID appears in the Reader Output window, the reader is functioning. Customer Display You can optionally add a customer display to the 15D1 touchcomputer....

15D1 T OUCHCOMPUTER U SER G UIDE 20 Feature Description Display type Vacuum fluorescent display Display color Red Display pattern 5 x 7 dot matrix Brightness 350-600 cd/m 2 Characters available 95 alphanumeric & 32 international characters Dot size (X x Y) 0.86 x 1.2 mm Font size 5.5(W) x 10.5(H...

15D1 T OUCHCOMPUTER U SER G UIDE 21 Fingerprint Reader (FPR) The fingerprint reader is powered by the USB bus. The reader optically scans the fingerprint when the user touches the glowing window. Optical technology gives the highest quality fingerprint scans and reliability. Fingerprint reader speci...

15D1 T OUCHCOMPUTER U SER G UIDE 22 Barcode Scanner There are two types of optional USB barcode scanners: 1-D or omni-directional. The barcode scanner is only an option if the speaker bar is present. When a scanner is chosen, a USB-SSI (Simple Serial Interface) converter board is included. Both barc...

15D1 T OUCHCOMPUTER U SER G UIDE 23 • Omni-directional scanner (Elo P/N E449881) specifications: • Ability to generate omni-directional scanning pattern • Maximum performance • 2-D scanning ability (PDF417, MicroPDF) • USB powered • Easy communication between host and scanner • Visible laser diode o...

15D1 T OUCHCOMPUTER U SER G UIDE 24 2. Now scan the barcode below to change the scanning pattern. Using this scanning pattern allows you to read 2-D barcodes (you can still read 1-D barcodes). Testing the Barcode Scanner 1. Determine which port the barcode scanner is using: a. Click Start > Setti...

15D1 T OUCHCOMPUTER U SER G UIDE 25 3. Change the Port field value to match the value you retrieved from the Device Manager. 4. Click Connect . You should see the text “Connected” in the Messages field. 5. In the box labeled Param Number , enter the value 238 . 6. In the box labeled New Value , ente...

15D1 T OUCHCOMPUTER U SER G UIDE 26 8. Scan a barcode (sample given below). The scanned data should appear in the “Messages” section of SSIContainer screen. The barcode scanner also has the ability to run in USB-KB emulation mode. To enable this option, please install the required drivers. To find t...

15D1 T OUCHCOMPUTER U SER G UIDE 27 Testing the Wireless Card To test the wireless card: 1. From the desktop, click Start > Settings > Control Panel > Network Connections (in Windows XP) or Start > Control Panel (in Vista). 2. Double-click the Wireless Network Connections icon to display...

15D1 T OUCHCOMPUTER U SER G UIDE 28 2. In the 15D1 Test Applications folder on the desktop, double-click the FD2XX Test icon to start the test program. The screen displays “Display is open.” 3. Turn off the test equipment. The screen displays “Display is closed.” 4. Click Send 200ms. The software au...

15D1 T OUCHCOMPUTER U SER G UIDE 29 C H A P T E R 4 SAFETY AND MAINTENANCE Safety Here is some important information on the proper setup and maintenance of your touchcomputer. • To reduce the risk of electric shock, follow all safety notices and never open the touchcomputer case. • Turn off the prod...

15D1 T OUCHCOMPUTER U SER G UIDE 30 Care and Handling The following tips help keep your touchcomputer functioning at the optimal level. • To avoid risk of electric shock, do not disassemble the power adapter or display unit cabinet. The unit is not user serviceable. Remember to unplug the display un...

15D1 T OUCHCOMPUTER U SER G UIDE 31 WEEE Directive In the European Union, the Waste Electrical and Electronic Equipment (WEEE) directive label shown to the left indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility for recovery ...

15D1 T OUCHCOMPUTER U SER G UIDE 32 C H A P T E R 5 TECHNICAL SPECIFICATIONS Touchcomputer Specifications NOTE: Not all operating systems or options are supported in all regions. Please contact your local Elo TouchSystems representative for details. Feature Description Processor Intel Celeron 430M 1...

15D1 T OUCHCOMPUTER U SER G UIDE 35 Feature Description Peripheral options and upgrades Magnetic stripe reader, 3 tracks Customer display 2 x 20 VFD Biometric fingerprint reader Barcode scanner (1-D or omni/2-D) Second 80GB hard drive Wireless card Printer power cable Connector Specifications Serial...

15D1 T OUCHCOMPUTER U SER G UIDE 36 Serial Port Power Selection J1/J2 Setting Function All pins open No power Pins 1-2 short/closed 5V (default) Pins 2-3 short/closed 12V Cash Drawer Port Specifications The cash drawer port is 12/24V compatible. Cash Drawer Port Signal Definition Pin # Signal Name 1...

15D1 T OUCHCOMPUTER U SER G UIDE 37 Display Screen Specifications Feature Specification LCD display 15.0-inch diagonal TFT active matrix LCD Video input signal Analog RGB (0.7Vp-p) Data display channel (DDC) function (plug & play) DDC1, 2B compliant (EDID data only) Display size (useful screen a...

15D1 T OUCHCOMPUTER U SER G UIDE 38 Feature Specification Horizontal viewing angle (left/right) 70° looking left typical at a CR=10 70° looking right typical at a CR=10 Contrast ratio 700:1 (typical) Optional touchscreens AccuTouch, IntelliTouch, Acoustic Pulse Recognition 7000 and 7010 Environmenta...

15D1 T OUCHCOMPUTER U SER G UIDE 39 C H A P T E R 6 TECHNICAL SUPPORT Technical Assistance There are three methods to obtain contact information for technical assistance on the touchcomputer: • The touchcomputer • The web • The phone Using the Touchcomputer You can access support information in Syst...

15D1 T OUCHCOMPUTER U SER G UIDE 40 Using the Phone Call toll-free 1-800-ELO-TOUCH (1-800-356-8682).

15D1 T OUCHCOMPUTER U SER G UIDE 41 REGULATORY INFORMATION I. Electrical Safety Information A) Compliance is required with respect to the voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified herein may result ...

15D1 T OUCHCOMPUTER U SER G UIDE 43 iv) Plug the digital device into a different AC outlet so the digital device and the receiver are on different branch circuits. v) Disconnect and remove any I/O cables that the digital device does not use. (Unterminated I/O cables are a potential source of high RF...

15D1 T OUCHCOMPUTER U SER G UIDE 44 WARRANTY Except as otherwise stated herein or in an order acknowledgment delivered to Buyer, Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship. With the exception of the negotiated warranty periods; the warranty for th...

15D1 T OUCHCOMPUTER U SER G UIDE 46 INDEX address, Elo TouchSystems, 48 advertising brackets, 7 audio ports, description, 15 barcode scanner enabling 2-D scanning, 23 overview, 22 specifications, 22 testing, 24 base power status, 11 base, securing, 7 box contents, 1 brackets, advertising, 7 cables i...