Elite Screens Raptor/Raptor Tension - Manual
Elite Screens Raptor/Raptor Tension – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Components List; Hardware Pack; Connector Housing; X 8; Screw; Controllers; Remote Control
- Page 3 – Required Tool; Phillips Head Screwdriver; Use of connecting bolts when assembling the components; Use a Phillips Head Screwdriver to attach the
- Page 4 – Operation; The; screen module
- Page 5 – Assembly Step; Connecting Bolts; to fixed to the; base; Then attach the; partitions; via the connecting bolts as described on page 2.; X 6PCS; using the connecting bolts and housings.; X 6pcs
- Page 6 – to the; X 2pcs; to secure the media stand’s body.; X 4pcs
- Page 7 – Turn over the media stand and lock the; connector housings; Attach the doors with the concealed hinges and install the; back; using the grooves in
- Page 8 – Cover; and lock with the connector housings.; X 10pcs; into the assembled; shelf; (see enlarged image below) for a sccure fit and proper installation.; Designed for screen module assembly
- Page 9 – have variable height placements.; X 8pcs
- Page 10 – Caution; When in use, please don’t reach into the screen case.; Troubleshooting; Cease operation
- Page 11 – Warranty Policy; *Valid in the US and Canada only; parts and labor warranty from defects in workmanship for; GEMR; must be issued in order to; Do not return; any unauthorized items to Elite Screen, as they will be refused and; Missing Parts; Remember to register your Product at
- Page 12 – Contact Info; Please contact us at
Rev. 031210-JA
www.elitescreens.com
Raptor/Raptor Tension Series
Electric Floor Rising Front Projection Screen
User
’s Guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 Components List A (Base) BCD (Partitions) E (Support) F (Veneer) GH (Sides) IJ (Doors) KLMN (Back) O (Cover) P (Cover) QR (Layer) Hardware Pack Connecting Bolt X 37 Connector Housing X 37 Shelf Support (nog) X 8 Screw X 8 Controllers IR (Infrared) Remote Control RF (Radio Frequency) Remote Control...
2 Required Tool Phillips Head Screwdriver Use of connecting bolts when assembling the components Step1: Use a Phillips Head Screwdriver to attach the Connecting Bolt to the furniture components (unit-A). Step2: Insert the exposed section of the connecting bolt on (unit-A) into the hole on the side-e...
3 Operation The screen module (component-P) can be used by itself on a flat, level surface or it can be combined with Elite’s Raptor media stand housing as a fully assembled product. The power connection is located on the screen module’s rear right-hand leg support and feeds conveniently through the...
