Elite Screens Raptor/Raptor Tension - Manuals

Page 2 - Components List; Hardware Pack; Connector Housing; X 8; Screw; Controllers; Remote Control

1 Components List A (Base) BCD (Partitions) E (Support) F (Veneer) GH (Sides) IJ (Doors) KLMN (Back) O (Cover) P (Cover) QR (Layer) Hardware Pack Connecting Bolt X 37 Connector Housing X 37 Shelf Support (nog) X 8 Screw X 8 Controllers IR (Infrared) Remote Control RF (Radio Frequency) Remote Control...

Page 3 - Required Tool; Phillips Head Screwdriver; Use of connecting bolts when assembling the components; Use a Phillips Head Screwdriver to attach the

2 Required Tool Phillips Head Screwdriver Use of connecting bolts when assembling the components Step1: Use a Phillips Head Screwdriver to attach the Connecting Bolt to the furniture components (unit-A). Step2: Insert the exposed section of the connecting bolt on (unit-A) into the hole on the side-e...

Page 4 - Operation; The; screen module

3 Operation The screen module (component-P) can be used by itself on a flat, level surface or it can be combined with Elite’s Raptor media stand housing as a fully assembled product. The power connection is located on the screen module’s rear right-hand leg support and feeds conveniently through the...

Page 5 - Assembly Step; Connecting Bolts; to fixed to the; base; Then attach the; partitions; via the connecting bolts as described on page 2.; X 6PCS; using the connecting bolts and housings.; X 6pcs

4 Assembly Step 1. Attach the Connecting Bolts to fixed to the base (component-A). Then attach the partitions (components-B, C and D) via the connecting bolts as described on page 2. X 6PCS 2. Install the Support (component-E) using the connecting bolts and housings. X 6pcs X 6pcs

Page 6 - to the; X 2pcs; to secure the media stand’s body.; X 4pcs

5 3. Veneer (component-F) Installation. X 6pcs X 2pcs 4. Attach the Side boards (components-G & H) to the Base and Veneer (components-A & F). X 2pcs X 12pcs 5. Lock the Connector Housings to secure the media stand’s body. X 4pcs F

Page 7 - Turn over the media stand and lock the; connector housings; Attach the doors with the concealed hinges and install the; back; using the grooves in

6 6. Turn over the media stand and lock the connector housings on the bottom. X 8pcs 7. Attach the doors with the concealed hinges and install the back panels (components-K,L,M and N) using the grooves in (components-G, B, C, D, & H) . X 8pcs

Page 8 - Cover; and lock with the connector housings.; X 10pcs; into the assembled; shelf; (see enlarged image below) for a sccure fit and proper installation.; Designed for screen module assembly

7 8. Install the Cover (component-O) and lock with the connector housings. X 10pcs X 10pcs 9. Put the screen module (component-P) into the assembled media stand. It must align with the shelf supports (see enlarged image below) for a sccure fit and proper installation. P Designed for screen module as...

Page 9 - have variable height placements.; X 8pcs

8 10. Shelf installation: (adjustable) The shelf supports (nogs) have variable height placements. X 8pcs 11. Complete Infrared-Sensitive Safety Device (ISSD) This is a safety feature to prevent injuries caused by fingers, hair, etc. getting caught up in the screen’s closing mechanism. If the small i...

Page 10 - Caution; When in use, please don’t reach into the screen case.; Troubleshooting; Cease operation

9 Caution 1. The stand should only be cleared up by dry wipes appropriate for furniture care. 2. The screen material may be cleaned with a damp cotton cloth but caution should be taken to avoid getting moisture down into the rolled material or mechanical functions of the screen. 3. For optimal produ...

Page 11 - Warranty Policy; *Valid in the US and Canada only; parts and labor warranty from defects in workmanship for; GEMR; must be issued in order to; Do not return; any unauthorized items to Elite Screen, as they will be refused and; Missing Parts; Remember to register your Product at

10 Warranty Policy *Valid in the US and Canada only  Two (2) year warranty parts and labor from defects in workmanship from purchase date as follows.  Three (3) year parts and labor warranty from defects in workmanship for GEMR (Government, Educational, Military, & Religious) purchases of new ...

Page 12 - Contact Info; Please contact us at

11 Contact Info US & Canada Tech Support & Warranty Claim Please contact us at [email protected] or call +1 877-511-1211 #3 Service Europe Tech Support & Warranty Claim Please contact us at [email protected] or call +49-(0) 40-30392958 Asia Tech Support & Warranty Claim ...