Elite Screens exCinema - Manuals

Page 2 - PARTS IDENTIFICATION:; Attention; Do not use the screen in a very strong windy environment; New Functions and features of F120 and above models

1 PARTS IDENTIFICATION: Attention : - Please install the two telescoping support rods simultaneously when pulling up and retracting the screen material. - Do not use the screen in a very strong windy environment - Do not use on uneven surfaces New Functions and features of F120 and above models : 1....

Page 3 - Setting up the screen; Extend the base feet:; Locate the base feet on the bottom of the box cover at each end and

2 Precautions: Warning! Screen damage can result from product mishandling if the enclosed precautions are not followed. In accordance with practicing home fire safety and to avoid screen damage, do not place the screen near or beside a fireplace or high temperature appliances such as a gas stove, BB...

Page 4 - while removing the telescopic support rod with your other hand.; Installing the support rod:; Support

3 Open the box cover: Unlatch the buckles on both ends of the box and open the box cover. Next, secure the box with one hand while removing the telescopic support rod with your other hand. Installing the support rod: First, make sure that the hanging hook is pointing toward the front facing the same...

Page 5 - the left hand so as to slowly raise; Adjusting the screen:

4 Vertical Adjustment: First loosen the locking sleeve, and then hold the small support rod with the left hand so as to slowly raise it upwards until the screen is fully stretched to the desired position. Adjusting the screen: Hold the screen with the left hand when the screen has been stretched to ...

Page 6 - Preparing screen for storage; Pulling down the screen; tighten the locking sleeve to secure it in place.; Retract the screen; hook and lower the screen gently into the box.; Pulling out the telescopic support rod; out the supporting rod from the support plate.

5 Preparing screen for storage 1. Pulling down the screen : First, hold the telescopic support rod with the left hand and loosen the locking sleeve counter-clockwise with the right hand. Then shorten the telescoping support rod slowly into the full retracted position and tighten the locking sleeve t...

Page 7 - alignment with the box.; Storing the screen; Never use your hand to touch the screen surface.

6 4. Storing the telescopic support rod : Properly center the supporting rod in the middle to maintain the weight balance in the box when carrying. 5. Draw the base feet back : Slightly lift each end of the box in turn rotating the two base feet underneath until they are back into alignment with the...

Page 8 - ezCinema Series Dimensions Table

7 ezCinema Series Dimensions Table Unit: mm Model Case Length (A) Screen Width (A1) View Width (A2) Upper Scroll Bar Length (A3) Overall Height (B) Screen Height (B1) View Height (B2) B3 Case Height (D) Case Width (C) N.W. (KGS) F60NWV 1410.0 1295.0 1219.0 1379.0 1990.2 1854.2 914.4 878.0 95.0 118.0...

Page 9 - Warranty Policy; as follows (except for refurbished units as specified below):; is not; must be issued in order to; Please; must be reported within 7-days of receipt. If reported after 7 days,; refurbished) or based on stock availability.; Please Visit this link for full Warranty information:

8 Warranty Policy  Two (2) year parts and labor warranty from defects in workmanship from purchase date as follows (except for refurbished units as specified below):  Each party will be responsible for one way shipping during the warranty period. Elite Screens is not responsible for applicable Int...