Page 3 - INSTRUCTION; Table of contents
0907 0 0 Notice Date Page 01201138 INSTRUCTION HANDBOOK General instructions General ................................................... 1/1 Precautions for use ................................. 1/2 Environmental information ...................... 1/3 Preliminary instructions ..........................
Page 4 - Identifi cation; General instructions; Adjustment label; GAS EXCHANGER
D0630A/434 0107 1 1 Notice Date Page 01201138 INSTRUCTION HANDBOOK 1. General Identifi cation plate General instructions The machines described in this handbook have a washing capacity of 229, 338, 467 or 668 litres according to their type. They are washer-extractors designed to meet the most severe ...
Page 5 - SELECT; GO TO THE MENU; MAKE YOUR CHOICE WITH; RUN A WASH PROGRAM
4221A 0107 2 1 Notice Date Page 01201138 INSTRUCTION HANDBOOK 1. General This washer extractor is controlled by a microprocessor-based program control unit placed on the loading side. There are many advantages to this equipment, including : • Timing, levels and temperatures are controlled with great...
Page 7 - Precautions for use; The machine should not be used by children.
0107 1 2 Notice Date Page 01201138 INSTRUCTION HANDBOOK 2. Precautions for use Precautions for use The machine should not be used by children. The machine is designed for "water washing" of textile only. This machine is for professional use and must be used exclusively by qualifi ed per-sonne...
Page 8 - information; Forseeing its recycling, this machine is fully dismantle.
0107 1 3 Notice Date Page 01201138 INSTRUCTION HANDBOOK 3. Environmental information Environmental information Concerned by providing the end user with useful and necessary environmental information, we wish to precise : Data about energetic consumptions, wastes (atmospheric and liquid) and sound le...
Page 9 - Explanation of graphic symbols; instructions; Before any use, it is compulsory to read the instruction handbook.
0107 1 4 Notice Date Page 01201138 INSTRUCTION HANDBOOK A fl ash of lightning with an arrow at its end displayed inside an equilat-eral triangle, warns the user about the presence of uninsulated "dangerous current" suffi cient in intensity to cause electrocution. An exclamation mark inside an ...
Page 10 - Never try to open the drum door before the complete stop of the cage.
0107 2 4 Notice Date Page 01201138 INSTRUCTION HANDBOOK 4. Preliminary instructions SAFETY The mechanical and electrical installation of the machine should only be done by qualifi ed personnel. CAUTION Do not use the machine unless it is plugged into a correctly earthed power socket com-plying with s...
Page 11 - - Consult the use and fi rst aid advice on the packings.
0107 3 4 Notice Date Page 01201138 INSTRUCTION HANDBOOK 4. Preliminary instructions Ensure that the machine is not loaded beyond its nominal capacity (see "Specifi c load" in the instruction booklet’s technical charac-teristics).An excessive load has consequences for the lifetime of the ma-ch...
Page 12 - Distributor Letter
0107 4 4 Notice Date Page 01201138 INSTRUCTION HANDBOOK 4. Preliminary instructions Distributor Letter Chemical System Responsibility Disclaimer The following policy should be considered and understood as a warranty/disclaimer to customers operating textile care installations where liquid supply (ch...
Page 13 - tagging procedure; Close the stop valves
1 2 3 4 0107 1 5 Notice Date Page 01201138 INSTRUCTION HANDBOOK 5. Locking and tagging procedure Locking and tagging procedure A red insert at the beginning of this instruction handbook schematically shows the locking and tagging procedure described below. If you wish, you can detach this insert and...
Page 14 - / Lifting with handling straps; Handling; SAFETY
D0604A D0650A 0107 1 6 Notice Date Page 01201138 INSTRUCTION HANDBOOK 6. Handling 1/ Lifting with handling straps Lifting in that case can only be done with handling straps (minimum capacity 1000 daN) which bear weight of the machine. Handling Before any handling, check that the four transport locks...
Page 15 - CAUTION
D0603A D0659A 0107 2 6 Notice Date Page 01201138 INSTRUCTION HANDBOOK 2/ Lifting with a fork-lift truck This can be carried out from the front or back, at the centre of the machine. CAUTION You should never handle the machine in its longitudinal side (any other than shown on the drawing below) with ...
Page 16 - / Lifting with a jack
D0671A A B B A 0107 3 6 Notice Date Page 01201138 INSTRUCTION HANDBOOK 6. Handling CAUTIONIn order to avoid any bend-ing of casings, you should never climb and stand on top of the machine. 4/ Lifting with a jack Lifting in this case can only be done with a jack (minimum capacity 500 daN) which can b...
Page 17 - Packing; Identifi cation plate
D0660/776 0107 1 7 Notice Date Page 01201138 INSTRUCTION HANDBOOK 7. Packing - Weight Packing Packing dimensions in mm/inch Size A Size B Size C Washer extractor Type 250 standard 1180/46.5 1230/48.4 1840/72.4 Washer extractor Type 250 barrier 1180/46.4 1230/48.4 1840/72.4 Washer extractor Type 350 ...
Page 18 - characteristics; Top view
07100081B 1009 1 8 Notice Date Page 01201138 INSTRUCTION HANDBOOK 8.Technical characteristics Washer extractor type 250 standard Top view Drain connection Front view Right view Left view
Page 19 - Washer extractor type 250 standard
0208 2 8 Notice Date Page 01201138 INSTRUCTION HANDBOOK Washer extractor type 250 standard Diagram no. 07100081B 8.Technical characteristics * normal cycle : prewash 3 min at 35 °C, drain. 2 min, main wash 4 min at 65 °C, drain 2 min, rinse 2 min, extract. 2 min, rinse 2 min, ex-tract 2 min, rinse 2...
Page 20 - Washer extractor type 350 standard
07100083B 0408 3 8 Notice Date Page 01201138 INSTRUCTION HANDBOOK Washer extractor type 350 standard 8.Technical characteristics Top view Drain connection Front view Right view Left view
Page 22 - Washer extractor type 500 standard
07100085B 0408 5 8 Notice Date Page 01201138 INSTRUCTION HANDBOOK Washer extractor type 500 standard 8.Technical characteristics Top view Drain connection Front view Right view Left view
Page 26 - Washer extractor type 250 barrier
07100082B 0408 9 8 Notice Date Page 01201138 INSTRUCTION HANDBOOK Washer extractor type 250 barrier 8.Technical characteristics Top view Drain connection Front view Right view Left view
Page 28 - Washer extractor type 350 barrier
07100084B 0408 11 8 Notice Date Page 01201138 INSTRUCTION HANDBOOK Washer extractor type 350 barrier 8.Technical characteristics Top view Drain connection Front view Right view Left view
Page 30 - Washer extractor type 500 barrier
07100086B 0408 13 8 Notice Date Page 01201138 INSTRUCTION HANDBOOK Washer extractor type 500 barrier 8.Technical characteristics Top view Drain connection Front view Right view Left view
Page 34 - techniques; Label of energetic performance (gas heating only); The global output; Sound level; Symbolisation of the label
D0267 0107 17 8 Notice Date Page 01201138 INSTRUCTION HANDBOOK 8. Characteristics techniques Label of energetic performance (gas heating only) The global output hg of the gas heated washer-extractor is determinated according to a stand- ardised method and shall not be lower than 50 %. This output mi...
Page 35 - Unpacking; water; Check that no damage has been caused during transport.; Installation; the machine, a wall or any other machine at the sides.
D0621A 40" 40" 40" 0408 1 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK You should have found an instruction handbook and keys to open the machine casings, in the machine. Depending on its destination, the washer extractor is delivered bare or may be placed on a transport pallet and/o...
Page 36 - Working place lighting; List of accessories provided with each machine:
1109 2 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK Working place lighting The lighting should be designed so as to avoid eye strain for the operator ; it should be uniform without any glare, and should be suffi cient to detect any hazards. The average lighting value on the working place recommen...
Page 37 - Mechanical installation; Putting the machine into service
D0622A 0107 3 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK Mechanical installation Setting of the "Gripsol" bolsters Preparation of the ground and machine : - Degrease carefully the ground and the soles of the machine. Preparation of the "Gripsol" bolsters : - Soak the bolsters i...
Page 38 - Instructions to fi t the safety fl anges; Put the pins in the fl anges, position the fl anges and screw.
D0697A 0107 4 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK 9. Installation Instructions to fi t the safety fl anges Position the safety fl anges (A) crosswise (one in the front and the other at the back of the sole). Mark the place of the drilling hole for the fi xing pin (B) and drill the holes for...
Page 39 - Instructions to fi t the fi lling angles (barrier machines only)
D0696A 0107 5 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK 9. Installation Instructions to fi t the fi lling angles (barrier machines only) Two angles (A and B) allow to fi ll the the soles ends. Assemble each fi lling angle with screws and nuts to the sole ends which are next to the partition wall,...
Page 40 - Instructions de pose des dynamomètres
1009 6 9 D1798 D1799 A B Notice Date Page 01201138 INSTRUCTION HANDBOOK 9. Installation Instructions de pose des dynamomètres Sur les machines équipées d'un système de pesage, le montage des dynamomètres sur les types 250, 350 et 500 est en "O" (voir schéma A). Pour éviter des effets sonores...
Page 41 - This page ist left blank on purpose.
1009 7 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK 9. Installation This page ist left blank on purpose.
Page 42 - Machine type; Size
D0582B 0107 8 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK 9. Installation Instructions for installation of the washer with barrier partition The barrier partition (O) (provided by customer) should be assembled before the installation of the machine. Centre and align the washer-extractor with th...
Page 43 - Waters connections; B Water
D0577A 0107 9 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK Waters connections Washer extractors are assembled in standard execution with two waters inlet.One hot water and one hard water. On option, a third water inlet (soft) is possible. The hereunder example sketch shows the connection of the ...
Page 44 - Steam connection; Steam; Steam set
D1680 D1679 1008 10 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK Steam connection For transport reasons, the steam electrovalve is dismantled and placed in the cardboard box supplies. The inlet pipe to the machine has to be fi t with a manual stopping valve to ease installation and maintenance. C...
Page 45 - Steam and condensate connections: indirect steam heating
1107 11 9 D1524 Notice Date Page 01201138 INSTRUCTION HANDBOOK Steam and condensate connections: indirect steam heating Steam connection The customer must install a line purge, a manually closing valve with handwheel lockable in off position (do not use a 1/4 turn valve) and a fi lter on the supply s...
Page 46 - Drain connection; Drawing of drain connection to waste waters' collector; Connect the durit to the connect nozzle.; Beside drain kit
D1613 0408 12 9 D1591 Notice Date Page 01201138 INSTRUCTION HANDBOOK 9. Installation Drain's evacuation sleeve Connection durit Connection nozzle Waste water collector Drain connection The machine's exhaust sleeve outside diameter is of 75 mm (3"). It is located underneath the machine. The waste...
Page 47 - Air vent connection; Air vent; Installation of the gas exchanger
D0625B 0110 13 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK Air vent connection The air vent of the drum opens on the top of the machine. Connect the connection bellow Ø 60 to this opening. Connect the air vent, to the outside of the laundry in accordance with tte legislation. The air vent shoul...
Page 49 - Connection of the evacuation pipe of the gas exchanger.; Fresh air inlet; Maximum pressure available with no fl ow : 27 mm H; ventilation of 7 dm2; and a
D0460 0107 15 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK 9. Installation Connection of the evacuation pipe of the gas exchanger. Fresh air inlet To allow the gas exchanger to work at ist best, it is important that the laundry air inlet passes throught an opening from the outside. The fresh air...
Page 50 - Installation of the chemney regulator
D0693A D0435 0107 16 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK 9. Installation Installation of the exhaust of burn gas Connect the whole set of pipes on your cheminey pipe, that is to say : 1 aluminium pipe (A) lenght 500 mm (20") on the exchanger. 1 T-square (B) pipe + 1 regulator (C). 1...
Page 51 - Gas connection; : ignition and control electrodes
D0410 B A C D 0107 17 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK 9. Installation Gas connection CAUTION The installation, connection and gas arrival adjustments for the machine must be done by qualifi ed personnel only. The customer must install a fi lter and a manual stop valve on the supply si...
Page 52 - Testing pressures; Screw the two screws and block.
D0291 0107 18 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK 9. Installation The gas exchanger is adjusted at the plant to be suitable for the kind of gas specifi ed on the order. If you have to supply your machine with gas in a family different from the gas for which your machine was adjusted, pro...
Page 53 - IMPORTANT; Adjustement and chesking of the outlet pressure
D0290 D0034 0107 19 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK 9. Installation IMPORTANT Adjustments should be made by qualifi ed personnel only. Adjustement and chesking of the outlet pressure The gas outlet pressure of the electrovalve is adjusted at the factory. If you have to make another a...
Page 54 - Legend of symbols used
0608 20 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK 9. Installation Legend of symbols used I: machine working with only one gas familyII: machine working with two gas families 1: 1 st family : caol gas or town gas (for information : not used here) 2: 2 nd family : natural gas 3 : 3 th family : ...
Page 55 - TABLE OF CORRESPONDENCES - Washer-Extractor 250
0107 21 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK 9. Installation ** normal cycle : prewash 3 min at 35 °C, drain. 2 min, main wash 4 min at 65 °C, drain 2 min, rinse 2 min, extract. 2 min, rinse 2 min, extract 2 min, rinse 2 min, extrac. 10 min (cold water supply at 15 °C). ** normal cycle :...
Page 56 - TABLE OF CORRESPONDENCES - Washer-Extractor 500
0107 22 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK 9. Installation TABLE OF CORRESPONDENCES - Washer-Extractor 500 Category Type Working Ø of Pressure at Heat Consumption Consumption of gas supply Hi injectors injectors emission Mn in Vn in index pressure in mm in mm H 2 O Qn in kW kg/h (Hi)**...
Page 58 - Liquid detergents connection; ADVISE IF USING LIQUID DETERGENTS
0107 24 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK CAUTION Liquid detergents are particularly aggressive. We advise you to use only products with pH lower than 9 in order to avoid the machine's rubbers from being attacked.Dilute imperatively all of your detergents before letting them fl ow into...
Page 59 - ater
D1482 D1483 0107 25 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK 9. Installation CAUTION The running of detergents must be independent from the running of the machine.The control information of detergents must imperatively be relayed. Connection scheme of liquid detergents We advise you to use o...
Page 60 - Electrical liquid detergents' connection
0107 26 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK 9. Installation Electrical liquid detergents' connection If your machine have 1 I/O card, you have to use signal of detergent box. Connectors card I/O no 1 Powder 1 IO1-X9-4 Powder 2 IO1-X9-5 Liquid 1 IO1-X14-1 Liquid 2 IO1-X14-2 Liquid 3 IO1-...
Page 61 - Washer-extractor electricity power supply
0107 27 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK 9. Installation Washer-extractor electricity power supply CAUTION Prior to use, the washer-extractor should be plugged into a correctly earthed power socket complying with the standards in force. SAFETY The electrical installation of the machi...
Page 64 - Table 1; Maximum Admissible Current; Table 2; (correction factors for different cable insulating materials)
0107 30 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK 9. Installation The feeder cable sections mentioned in our literature are given only as a guide. To obtain a value perfectly suited to your own application and which takes account of the differ-ent correction factors in respect of your plant, ...
Page 65 - Table 4; Calculation : Example; Electric
0107 31 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK 9. Installation Table 4 (B2, C and E correction factors for cable grouping) B2 C E Number Seated in Wall Fixing Cable of cables Cable Duct or Cable Trough Tray 1 1.00 1.00 1.00 2 0.80 0.85 0.87 4 0.65 0.75 0.78 6 0.57 0.72 0.75 9 0.50 0.70 0.7...
Page 66 - Remove of the transport locks fi tted
D0628A 0107 32 9 Notice Date Page 01201138 INSTRUCTION HANDBOOK 9. Installation CAUTION Before putting the machine into service, it is compulsory to remove the 4 transport locks fi tted. Remove of the transport locks fi tted To do so, remove the front and rear casings, then the fi xing screws of the tr...
Page 68 - Operating inspection; Manual operation; Note; inspection
0107 1 10 Notice Date Page 01201138 INSTRUCTION HANDBOOK Operating inspection Before putting the machine into service, carry out the working tests. The operating inspection must be done by an approved technician. Manual operation The procedure for operating the various machine functions manually is ...
Page 69 - Automatic operation
0107 2 10 Notice Date Page 01201138 INSTRUCTION HANDBOOK Automatic operation • Check that the external switch or switches are switched on and that the manual valves for water and steam (if the machine has steam heating) are open. • Run one of the machine's built-in (standard) with heating. • Check t...
Page 70 - operation; Emergency stop; Auxiliary controls; Gas exchanger
1 D0698 2 3 D0543 D0544 0107 1 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK 11. Machine operation Emergency stop The emergency stop must be unblocked, if not the machine will not work (to unblock, turn the red button to the right). If the machine for some reason has to be stopped, abnormal or d...
Page 71 - The control board on the loading side includes the following :
2 1 D0682 2 1 4 3 D0682 6 5 8 7 0107 2 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK The control board on the loading side includes the following : Indicator (1) light = "power On". Key (2) "Cage positioning". Key (3) "Door unblocking". Emergency stop (4). Indicator (5) l...
Page 72 - Preparation; • Position the cage doors in front of the
D0612 5 4 3 D0694 D0695 0107 3 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK Automatic operation Preparation Sort the linen according to the instructions mentioned on the care labels. Empty the pockets and clasp the slide fas-teners. • Position the cage doors in front of the drum door thanks to ...
Page 73 - Add detergent and other laundry products.; • Never press the doors in (A) to rotate the; WARNING; ATTENTION
D0613 6 0107 4 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK • Block the cage (B) by rotating it manu- ally to the front and rear so that the upper door stops on the blocking straps (C). Add detergent and other laundry products. If you are using the machine's built-in detergent dispensers, add t...
Page 74 - Dosage of the detergents; Compartment Valve; Y9 warm
7 D0595 8 P2 L2 L1 L3 P1 1109 5 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK Dosage of the detergents Pour the detergents in the containers ac-cording to the program. P1 : powder product (prewash) P2 : powder product (wash) L1 : liquid product (ex : chlorine) L2 : liquid product (ex : neutraliz...
Page 75 - To run a wash program; The « Move back » key
3627 0807 6 11 4221A Notice Date Page 01201138 INSTRUCTION HANDBOOK To run a wash program The « Move back » function Each press of the « Move back » key moves you back one menu, in reverse order. By pressing this key repeatedly you can return to this menu at any time : If you fi nd you are in the wro...
Page 76 - PCS; Press; By entering the actual program number; To start the wash program
991 0 993 993 0 0807 7 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK Use the numeric key to en-ter the program number. Press SELECT. If you have entered a wrong number… Enter the correct number to overstrike the earlier one. Note: you must always enter three digits, even when the number is reall...
Page 77 - START; section; EXIT
1 00:00 991 1 2 3 4 5 6 7 8 9 0 2 14:30 991 0107 8 11 3627 Notice Date Page 01201138 INSTRUCTION HANDBOOK Nom du programme Delayed start time(hrs:mins) 2 Delayed start Use the numeric keys to enter a time (max. 24 hrs). This parameter appears on the right of the display. Press START. Delayed start D...
Page 78 - Rapid advance (see section « Rapid advance »)
0107 9 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK Additional functions during the program Rapid advance (see section « Rapid advance ») Rapid advance through the program to the program step required. Rapid advance can be used to move both forwards and backwards through the program. Pause (see...
Page 79 - To start a wash program from the program library
0107 10 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK To start a wash program from the program library Waht is the program library ? The program library lists all wash programs, both user and standard programs, showing their program num-bers and a description, for example : 1 MY OWN 40°C (104°F)...
Page 80 - MENU
0 0107 11 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK Select library via menu You can also select the program library via the option "GO TO THE MENU". Then select "WASH PRO-GRAM LIBRARY". To select a program from the PCU program labrary : Press PCS. If there is a memory card in...
Page 82 - To change parameters in the current program step; Extract
1 2 3 4 5 6 7 8 9 0 0107 13 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK To change parameters in the current program step During program operation the display will look like this (see section « To start the wash pro-gram »). You can alter the following parameters : Prewash, Main wash, Rinse, Dr...
Page 83 - Rapid advance
0107 14 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK Rapid advance During program operation the display will look this (see section « To start the wash program »). Check that « RAPID ADVANCE » is highlighted. To terminate a program before it has fi nished • Select RAPID ADVANCE and press SELECT....
Page 84 - Notice; (for machines with weighing equipment installed only)
0107 15 11 CLARUS CONTROL Notice Date Page 01201138 INSTRUCTION HANDBOOK 11. Machine operation Show weight (for machines with weighing equipment installed only) During program operation, the display will look like this (see section "To start the wash pro-gram"). Show weight The actual weight...
Page 85 - No water reduction
0107 16 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK 11. Machine operation During program operation, the display will look like this (see section "To start the wash program"). No water reduction The wash load is weighed during the program and the water level is adjusted automatically ac...
Page 86 - Pause
0107 17 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK Pause Two ways of pausing during a wash program Note that you must be in normal wash mode to be able to pause in this way. If, for example, you are us-ing "Manual Functions", you will have to exit that fi rst before you can use Pause. ...
Page 87 - Manual operation during a program; anual operation during a program; Manual operation when no program is running
0107 18 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK Manual operation during a program During program operation the display will look this (see section « To start the wash program »). Two types of manual operation There are two types of manual operation, which should not be confused : • M anual...
Page 89 - Press OPEN
0107 20 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK To access this function, see instructions in section « Manual operation ». Water level in drum. Press OPEN . The function will be activated for as long as you press and hold this key. The function ceases as soon as you release the key. Press ...
Page 90 - Maximum extraction speed; higher
1 2 3 4 5 6 7 8 9 0 200 400 600 1000 800 3682 0107 21 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK Maximum extraction speed Press SELECT. To limit the program’s highest extraction speed This function allows you to modify the highest extrac-tion speed allowed during the program.Example :Assume t...
Page 91 - Motor on after wash; Press STOP to stop the motor.; STOP
0107 22 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK Press SELECT. Motor on after wash Motor to rotate after program has ended If you answer Yes (Y) : The motor will continue to rotate in alternative direc-tions after the program has ended. This prevents creas-ing of the load. When the program ...
Page 93 - Text; Press SELECT
0107 24 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK Text During program operation the display will look this (see section « To start the wash program »). Description of wash program. Automatic return to normal display If you do not press SELECT within 20 seconds, the display will revert automa...
Page 94 - To change the wash program after program operation has commenced
0107 25 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK To change the wash program after program operation has commenced During program operation the display will look this (see section « To start the wash program »). To change the wash program after program operation has commenced You can change ...
Page 96 - Auto restart
1 2 3 4 5 6 7 8 9 0 0107 27 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK Auto restart What is Auto restart ? Auto restart means that the same program will be repeated one or more times, according to the number set. The program will restart immediately, and the door will remain locked. If you ha...
Page 97 - To select manual operation
0107 28 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK Manual operation To select manual operation If this menu is not currently displayed : Press repeatedly. Two types of manual operation There are two types of manual operation, which should not be confused : • Manual operation when no program i...
Page 99 - Use
0107 30 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK Water fi lling : Press OPEN. The function will be activated for as long as you press and hold this key. The function ceases as soon as you release the key. Press SELECT. Drain (a toggle function) : Press Y/N to toggle the func-tion from Yes (Y...
Page 100 - Heating
1 2 3 4 5 6 7 8 9 0 0 °C 24 °C 0107 31 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK Use the numeric key to enter the temperature the water is to be heated do. Actual temperature Temperature selected Press START. Heating will now begin. If you wish, you can cancel heating before the set tempera-...
Page 101 - Detegent signals and water fl ushing
0107 32 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK To access this function, see in-structions in section « To select manual operation ». Detegent signals and water fl ushing Press SELECT. Press OPEN. The function will be activated for as long as you press and hold this key. The function ceases...
Page 102 - Standard machines
2 1 D0694 D0695 3 D0694 0107 33 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK 11. Machine operation At the end of the wash For your safety, the door can only be open after 40 seconds. Standard machines • Position the cage doors in front of the drum door with key "Cage positioning". • Pre...
Page 103 - • Open the cage doors.
4 D0695 0907 34 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK 11. Machine operation • Open the cage doors. • Unloading the linen and close the doors. You can start a new washing cycle. • Rotate the door manually to complete the positioning of the doors in front of the opening of the drum. WARNIN...
Page 104 - Statistics
0107 35 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK If this menu is not currently diplayed : Press repeatedly. Statistics To select "Statistics" Press SELECT. Press to highlight « GO TO THE MENU ». Press SELECT. Press fi ve times… … to highlight « STATIS-TICS ». 11. Machine operation SE...
Page 106 - Resetting statistics registers
0107 37 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK If the menu is not currently dis-played : Press repeatedly. Statistics registers which can be reset to zero The following registers in the statistics function can be cleared (reset to zero) : • Total trip run time hours. • Hours since last se...
Page 107 - CPU Button
3972 0107 38 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK The service mode may only be used by authorised personnel, because all safety interlocks are disabled when it is in use. Press SELECT. Now you can choose either to clear/reset a register or to adjust the weighing equipment. Press SELECT....
Page 108 - do not want to reset; Press any key; Time counter « service time » and « last service »
0107 39 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK Both counters can be reset in the same way. If you do not want to reset the register : Press any key other than SELECT. If you want to reset the register : Press SELECT. First you have a chance to change your mind. Time counter « service time...
Page 109 - Number of washes for program in timer or memory card
1 2 3 4 5 6 7 8 9 0 0 0 0107 40 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK Number of washes for program in timer or memory card You can reset program in both timer and the memory card (if inserted) : Write from which program number you want to clear wash programs. Press so that "CLEAR WAS...
Page 110 - ERASE
1 2 3 4 5 6 7 8 9 0 1 0 0107 41 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK Press ERASE. If you do not want to reset the register : Press on any button except SELECT. If you want to reset the regis-ter : Press SELECT. Do you want to change your mind ? Now the numbers of washes toy haves marked...
Page 113 - Reste tare to zero
0107 44 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK 11. Machine operation This screen shows that the stored tare parameter has been cleared. Press SELECT. Press SELECT. Press once to highlight "RESET TARE TO ZERO". Reste tare to zero (for machines with weighing equipment installed only...
Page 117 - Calibrate the scale
4758 0107 48 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK 11. Machine operation ON (normal) Scale unit Calibration switch CAL (calibrage) Set the calibration switch to calibartion mode. Calibration mode/normal mode To gain access to the calibration switch in the scale unit, the lower front pane...
Page 118 - hg
1 2 3 4 5 6 7 8 9 0 0107 49 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK 11. Machine operation (for machines with weighing equipment installed only) Press SELECT. Press SELECT. Press SELECT. Put the calibration weight in the drum. If you want to use the "Calibra-tion zero" function now ...
Page 122 - Description
D0793 1 PHASE PHASE N N 230 V 230 V X15-1 X15-2 X15-3 X15-4 2 3 4 X15 X15 1 2 3 4 Art. No. 71074156 1109 53 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK 11. Machine operation Functions "ON/OFF" and "Servo-control pause" by exterior signals Description During a programme, an on/o...
Page 123 - Memory card; General introduction
0107 54 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK Memory card General introduction A memory card is a plastic card, the size of a credit card, with an electronic memory chip inside it. This memory card is capable of storing 10 to 15 wash programs of normal size. If the programs are mostly sm...
Page 124 - To select the « Memory card » function
1 2 3 1 5 6 7 8 9 0 0107 55 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK If this menu is not currently displayed : Press repeatedly. Card reader Turn the memory card so its memory chip is at the far end, and on the left of the card... ...then insert the memory card into the program control unit...
Page 127 - To run a wash program straight from a memory card; program memory; ating memory; to...
00:00 994 0107 58 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK To run a wash program straight from a memory card Press SELECT. Program name To run a program from the memory card In broad terms, the program control unit has two differ-ent memories. One is a ” program memory ” where all its wash ...
Page 128 - Note that; or
0107 59 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK Note that restricted-use pro- grams on a memory card cannot be copied. To copy a program from memory card to the machine's program control unit Press SELECT. What is a restricted-use program ? A wash program which has been created on a PC can...
Page 129 - Press any key to continue.
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 0107 60 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK Choose 1 or 2 : 1 If you want to give the program a different program number (from the one it had on the memory card : Use the numeric keys to enter the new program number, the press SE-LECT. 2 If the e...
Page 130 - To copy a program from the program control unit to a memory card
0107 61 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK To copy a program from the program control unit to a memory card What happens when a program is copied ? Both the memory card and the program control unit have memory chips capable of storing wash pro-grams. The chip on the memory card can ho...
Page 132 - To delete a program on a memory card
0107 63 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK 11. Machine operation To delete a program on a memory card Press SELECT. The program will now be deleted from the memory card. This takes between 5 and 51 sec-onds. If you want to delete more pro-grams: Continue in the same way as described a...
Page 133 - To delete all programs on a memory card
0107 64 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK 11. Machine operation To delete all programs on a memory card If you change yor mind and do not want to delete the entire memory card : Press any key other than SELECT. Note that restricted-use pro- grams on a memory card cannot be copied. If...
Page 134 - Load cells
D0841 1 0107 65 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK 11. Machine operation Weighing equipment (optional equipment) Description The weighing equipment comprises the fol-lowing units : • A scale unit located • Four load cells, one in each corner of the frame • Wiring The weight of the was...
Page 135 - Reset to zero; Water level reduction; Normal display mode is resumed :
2 3651 3 4775 0107 66 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK 11. Machine operation Reset to zero Menu line showingactual weight Weight display mode Normal mode After a power-cut When the supply is restored after a power-cut, the weight display will show "0" if the load inside the ...
Page 136 - Resetting the weighing equipment
0107 67 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK 11. Machine operation Resetting the weighing equipment If the display does not show the weight (in an empty machine) as zero after a program, the weighing equipment can be reset to zero using the TAR key. For a description of the functions us...
Page 137 - If the weighing equipment has a fault
0107 68 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK 11. Machine operation Checking accuracy of weighing equipment display Twice a year you need to check that the weighing equipment is displaying the ac-curate weight, with the aid of an object of known weight. If the weighing equipment does not...
Page 138 - Load cell; The dead load selector; • Use a suitable jack to lift under the frame
4 4807 5 4872 1000- 1330 280- 650 2280 - 2600 20 20 - 23 50 58 0- 88 0 830 - 1 13 0 1730- 2050 15 00 - 18 30 123 0- 153 0 DEAD LOAD A B 0107 69 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK 11. Machine operation Load cell Install the new load cell as indicated by ar-row on side of load cell ! Th...
Page 139 - To replace the scale unit; • Remove the machine’s side panel.; Dead load selector
1000- 1330 280- 650 2280 - 2600 20 20 - 23 50 58 0- 88 0 830 - 1 13 0 17 30- 20 50 15 00 - 18 30 123 0- 153 0 DEAD LOAD 6 4807 0107 70 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK 11. Machine operation To replace the scale unit • Remove the machine’s side panel. • Disconnect the six connectors ...
Page 140 - Component locations
7 CEL D0842-4822-4822bis C1 C2 C3 C4 230 V X9-CPU UM 0107 71 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK 11. Machine operation Component locations Fig. 7 UM Scale unit CEL Load cells Connectors 230 V Voltage feed X9-CPU Communication with CPU board C1-C4 Load cells
Page 141 - Error message on display :; Weight-totalling board
8 4804 0107 72 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK 11. Machine operation Fault-fi nding, weighing equipment Error message on display : Weight, in kg : 999,0 or -999,9 Probable cause : The weighing equipment is overloaded/"underloaded", i.e. the load cells are sending a signal wh...
Page 142 - - Remove the four screws on the scale unit cover.; Menu line which should show actual weight not displayed.; scale unit and in good condition.
0107 73 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK 11. Machine operation • If more than one load cell is faulty, the faulty cells can be identifi ed using a multimeter on the scale unit weight-totalling board to check each cell in turn, as follows : - Remove the four screws on the scale unit c...
Page 144 - Information in display :; Weighing equipment not connected.; CPU board not communicating with scale unit.
0107 75 11 Notice Date Page 01201138 INSTRUCTION HANDBOOK 11. Machine operation Information in display : Function no allowed. Probable cause : A function has been selected in the program which cannot be carried out. Fault-fi nding procedure : • Check that the function in question is switched on under...
Page 146 - Safety; The drum door is kept opened by gas jacks.
0107 1 12 Notice Date Page 01201138 INSTRUCTION HANDBOOK 12. Safety Safety Restarting the machine After any stoppage of the machine, either due to power failure, emergency stop, motor safety, the machine can only be restarted after having pressed key "ON". Outer doors All of the different pa...
Page 147 - Drain; Gas
0107 2 12 Notice Date Page 01201138 INSTRUCTION HANDBOOK 12. Safety Drain A 'hold to run" switch allows the manual opening of the drain to empty the machine if needed (open the loading side casing to get to it). Accessibility All of the casings can be dismantled by means of a specially designed ...
Page 148 - Operating incidents
0108 1 13 Notice Date Page 01201138 INSTRUCTION HANDBOOK Operating incidents In order to limit the risk of failure in the electronic controls of the programming unit of the machine, the machine should be earthed. Should interferences happen, the fi rst thing to be checked is the earthing of the machi...
Page 152 - TANGLING OF THE LINEN
0108 5 13 Notice Date Page 01201138 INSTRUCTION HANDBOOK 13. Maintenance TANGLING OF THE LINEN The mechanical action during washing can lead to the tangling of large pieces such as bed sheets or table cloths. - Bad programming options can be responsible of this matter : too long washing cyclewashing...
Page 157 - KEB ERROR 87 EINI; KEB ERROR 90 ECCD; KEB ERROR 89 EHYBC; KEB ERROR 88 EOS
0108 10 13 Notice Date Page 01201138 INSTRUCTION HANDBOOK 13. Maintenance Error Meaning Possible cause KEB ERROR 87 EINI Error initialisation MFC. Displayed advertisement : - MFC not booted. . KEB ERROR 90 ECCD Error calc. drive data. Displayed advertisement : - During the automatic motor stator res...
Page 158 - Preventive maintenance; Maintenance
D0629B 13 2 10 11-18 17 16 8 15 4 12 5 9 16 1 14 3-14 13 15 6 15 7 0107 1 14 Notice Date Page 01201138 INSTRUCTION HANDBOOK 14. Preventive maintenance CAUTION Complete the washing cycle, unload the machine and shut off the power supplies (water, gas, electricity, steam) before any maintenance or rep...
Page 159 - Clean the soap box (operate the rinse electrovalve of soap box).
0107 2 14 Notice Date Page 01201138 INSTRUCTION HANDBOOK 14. Preventive maintenance Daily (8 H.) Check that the "emergency stop button" works properly. Check that the opening safety devices of the drum doors and of the outer doors are working correctly. Clean the soap box (operate the rinse ...
Page 160 - Clean the pump fi lter of the heating box on the gas exchanger.
3 1 2 2 4 6 8 8 7 5 8 0107 3 14 Notice Date Page 01201138 INSTRUCTION HANDBOOK Daily (8 H.) Clean the pump fi lter of the heating box on the gas exchanger. Weekly (40 H.) Clean the fl uff fi lter with suction device. Clean the cover fi lter with suction device. Monthly (170 H.) Check the pressure switch...
Page 162 - Colorants
0107 5 14 Notice Date Page 01201138 INSTRUCTION HANDBOOK 14. Preventive maintenance Colorants Do not input colorant in the machine with very hot water. Very hot water react with the colorant, which creates a very corrosive solu-tion. The colorants must be input with cold water or warm water which te...
Page 163 - MACHINE LUBRIFICATION
-20°C + 140°C -40°C + 200°C -20°C + 150°C -20°C + 135°C -30°C + 700°C 0°C + 100°C 0°C + 120°C +10°C + 65°C 96 011 011 96 011 019 96 011 014 96 011 000 96 011 004 96 010 001 96 010 004 96 010 030 CELTIA G2 NTN SH44 M ALTEMP Q NB 50 MI-SETRAL 43N GRACO AF 309 REDUCTELF SP150 REDUCTELF SP200 LUBRAK ATL...
Page 164 - Electric diagrams; list of CP parameters; Code
0310 1 15 Notice Date Page 01201138 INSTRUCTION HANDBOOK 15. Electric diagrams Confi guration of variator KEB type 5 list of CP parameters Code Function CP. 0 Password input CP. 1 Inverter status display CP. 2 Utilization CP. 3 Actual frequency display CP. 4 Peak of load CP. 5 Variator temperature CP...
Page 165 - Conversion of measurement units; british thermal unit :; Btu; continental horse power :; or l; temperature degrees :
0107 1 16 Notice Date Page 01201138 INSTRUCTION HANDBOOK 16. Appendices Conversion of measurement units The following is a list of correspondences of the main frequently used units, to avoid the need to use measurement unit conversion tables. bar : 1 bar = 100 000 Pa 1 bar = 1.019 7 kg/cm² 1 bar = 7...
Page 166 - Explanation of washing symbols; Very mild water cleaning.; The tub symbolizes washing.
D1250 D1251 D1252 D1253 D1255 D1257 D1258 D1261 D1262 D1263 D1264 D1256 D1254 D1259 D1260 95 95 D1232 95 95 D1233 70 D1234 60 D1235 60 D1236 50 D1237 50 D1238 40 D1239 40 D1240 30 D1242 30 D1243 D1245 D1247 D1248 D1249 D1246 40 D1241 30 D1244 0107 2 16 Notice Date Page 01201138 INSTRUCTION HANDBOOK ...