Electrolux LS6 - Manual
Electrolux LS6 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAVE THESE INSTRUCTIONS; SAFETY INSTRUCTIONS
- Page 5 – ENGLISH; TECHNICAL DATA; Table 1
- Page 6 – Figure 4; - Detergent connection; I C
- Page 7 – Check that the; dynamic; water supply; pressure; measures; between; INSTALLATION AND START-UP INSTRUCTIONS
- Page 10 – LEGEND
- Page 12 – USER INSTRUCTIONS
- Page 13 – Standard cycle time with supply water at 122°F/50°C.
- Page 15 – Close the door and start the
- Page 17 – • Remove any traces of salt from the filling hole, the; The message
- Page 18 – TROUBLESHOOTING; CONDENSATION ON GLASSES
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Electrolux
- Model
- LS6
- Document type
- Manual
- Language(s)
- English
- Pages
- 18
- File size
- 760.3 KB
- Format
Summary
4 To reduce the risk of fire, electrical shock, or injury when using your dishwasher, please follow these basic pre-cautions including the following: • Read all instructions before using your dishwasher. • This Manual does not cover every possible condition and situation that may occur. Use common s...
ENGLISH 7 B4 TECHNICAL DATA Standard cycle time may vary should the inlet water temperature be different from that indicated above. MODEL WT30H WT30H Supply voltage: 208V, 1ph, 60Hz 33amp 240V, 1ph, 60Hz, 29amp field upgrade to 208V, 3ph 60Hz 20amp 240V, 3ph, 60Hz, 18amp Total Watts 6.85 kW 6.85 kW ...
8 Figure 4 Legend Figure 4A - Water inlet pipe with 3/4”dia/19mm fittings C - Outlet pipe 1 5/8” ID /40 mm (^) –11/16” ID /18 mm (*). I - Power supply S - Detergent connection Q - Equipotential (Ground) screw Y - Rinse aid connection (^) - Only for model with free-fall drainage(*) - Only for model w...