Page 2 - Use; Important Safety Information
2 Installation ● This appliance is heavy. Care should be taken whenmoving it. ● It is dangerous to alter the specifications or attemptto modify this product in any way. ● All packing and transit bolts must be removed beforeuse. Serious damage can occur to the product and toproperty if this is not ad...
Page 3 - Contents; For the User; For the Installer
3 Contents For the User Important Safety Information 2 Your New Washer-Dryer 4 Description of the Appliance 5 Detergent dispenser drawer 5 The Control Panel 6-10 Functions 9 Programme Information 9-10 Operating sequence 11-12 Washing 11 Load the laundry 11 Measure out the detergent 11 Measure out th...
Page 4 - Your New Washer-Dryer; Ecological hints; Important
4 Your New Washer-Dryer Your new washing machine, fitted with the Electrolux “JET SYSTEM”, meets all modernrequirements for effective treatment of laundry with low water, energy and detergentconsumption. Even small loads are washed “economically” because the amount of water used is regulatedautomati...
Page 5 - Description of the Appliance; Detergent dispenser drawer
5 Description of the Appliance 1 Detergent dispenser drawer 2 Programme chart 3 Control panel 4 Door opening handle 5 Drain filter 6 Adjustable feet Detergent dispenser drawer Prewash Main wash Fabric softener Programme chart P0239S 1 3 4 2 5 6 E W 1 2 0 9 I 95 º E 60 º 40 º 30 º 40 º 30 º 40 º X 30...
Page 6 - The Control Panel; Prewash Button; Spin speed Button
6 The Control Panel • Synthetics, wool / hand wash: 500/700 max 900 r.p.m. • Delicates: 500 max 700 r.p.m. By selecting option the last rinse water is not emptied out, to prevent the fabrics from creasing. Whenthe programme has finished, the pilot light of theSTART/PAUSE button flashes to indicate t...
Page 9 - 5 Programme selector dial
9 15 Programme selector dial The selector is divided into 5 sections: • Cotton, linen • Synthetics • Delicates • Woollens (hand washing) • Special programmes • Reset programme X The selector dial can be turned either clockwise oranticlockwise.Position E corresponds to the ENERGY SAVING programme and...
Page 11 - Switch the machine on; Operating Sequence; Measure out the detergent
11 3. Measure out the fabric softener If required, pour fabric softener into the compartmentmarked (the amount used must not exceed the “MAX” mark in the drawer).Close the drawer gently. 4. Switch the machine on Press the ON/OFF button to switch the machine on. Thedisplay will show three blinking da...
Page 14 - Washing and Drying Hints
14 Washing and Drying Hints Do NOT overload the machine. Weigh the laundry the first few times you use the appliance. The average weights of the most common items arelisted below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g Tablecloth 400-500 g Serviette 50-100 g Tea towel 70-120 ...
Page 16 - Washing Programmes
The “coloured cotton programme” at 60°C is the reference programme for the data entered in the energy label, incompliance with EEC 92/75 standards. * This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of laundry, the temperature of the wa...
Page 17 - Special programmes
17 Special programmes * The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on thequantity and type of laundry, on the inlet water temperature and on the ambient temperature. Spin Speed /Rinse Hold Extra rinse Spin Speed /Rinse Hold Spin Speed Spi...
Page 18 - Drying Programmes
18 (*) The STORE DRY drying programme for cotton is the reference programme for the Energy Label data, incompliance with EC directive 92/75. Timed drying Degree of drying Store dry (*)Suitable for itemsto put awaywithout ironing Type of fabric Cotton and linen(towels, T-shirts,bathrobes) Max. load 2...
Page 19 - Wash Care Symbols; Important Notes
19 Wash Care Symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correctprogramme on your washing machine. WASHING SYMBOL B...
Page 20 - Maintenance and Cleaning
20 Cleaning the drawer recess Having removed the drawer, use a small brush to cleanthe recess, ensuring that all washing powder residue isremoved from the upper and lower part of the recess.Replace the drawer and run the rinse programme for afew minutes without any clothes in the drum. Cleaning the ...
Page 21 - The dangers of freezing
21 The dangers of freezing If the machine is exposed to temperatures below 0°C,certain precautions should be taken. ● Turn off the water tap. ● Unscrew the inlet hose. ● Unhook the drain hose from the rear support andposition the end of this hose and that of the inlethose in a bowl. Run the draining...
Page 22 - Something Not Working; Symptom; Possible causes
22 Something Not Working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily withoutcalling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listedbelow. IMPORTANT: if you call out an engineer to a fault list...
Page 24 - Guarantee Conditions; Standard guarantee conditions; Exclusions; European guarantee
24 Guarantee Conditions Standard guarantee conditions We, Electrolux, undertake that if, within 12 months ofthe date of the purchase, this Electrolux appliance or anypart thereof is proved to be defective by reason only offaulty workmanship or materials, we will, at our option,repair or replace the ...
Page 26 - Unpacking; Positioning
26 Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all the packaging for re-use incase the machine is to be transported again. Using a spanner unscrew and remove the rear right bolt.Lay the machine gently on its back, making sure that theho...
Page 27 - Water drainage; Water inlet
27 Water drainage This appliance is designed to be permanently plumbedinto your home's water supply and drainage system. The appliance drain hose should hook into a standpipe,the hook in the drain hose is formed using the plastic“U-Piece” supplied. The standpipe should have an internal diameter ofap...
Page 28 - Special conditions; In the interest of the; Levelling
28 Special conditions If the floor is carpeted or covered with crumbly or softmaterial, insert a rigid support base under the feet toprevent noise, vibration or displacement. The baseshould protrude a few centimetres beyond the edges ofthe machine. Warning The machine should NOT be placed on deep pi...
Page 29 - Electrical connection; Permanent connection
29 Electrical connection Any electrical work required to install this applianceshould be carried out by a qualified electrician orcompetent person. WARNING: THIS APPLIANCE MUST BEEARTHED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make su...