Electrolux EDI 96150 - Manual

6 electrolux safety • Only fill the water reservoir with dis-tilled water. Do not use tap water or any additives! The condensed water from this appliance’s condensed wa-ter container can also be used, if it is filtered first (e. g. with a coffee filter). • Clean the heat exchanger regularly. • With ...

disposal electrolux 7 Disposal Packaging materialThe packaging materials are envi-ronmentally friendly and can be re-cycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appro-priate container at the community w...

8 electrolux environmental tips Environmental tips • During the drying process, laundry becomes fluffy and soft. Fabric sof-teners are not therefore needed when washing. • Condensed water can be used for iron aid programmes after beeing fil-tered. • Your appliance will function most economically if ...

appliance description electrolux 9 Appliance description Drawer withcondensed water container Screwed feet(with height adjust-ment) Loading door(interchangeable stop) Control panel Drainage hose for water tank Steam nozzle Type plate Micro-fine filter (lint filter) Fine strainer (lint filter) Lamp f...

10 electrolux control panel Control panel What is shown in the display Programme knob and On/Off switch Display Function buttons STAR T/PAUSE-button Maintenance displays- HEAT EXCHANGER - CLEAN FILTER - CONTAINER DELAY TIMER button Degree of drynessDisplay DELICATE(DELICADO) LOAD (CARGA) DRYNESS (GR...

control panel electrolux 11 Function overview: Iron Aid TM Steam System This appliance can be used both as a dryer and to condition clothes (Iron Aid) to treat garments using steam. When it is operating as a dryer, there are 9 available programmes.When it is operating as a steam appli-ance, there ar...

12 electrolux prior to using for the first time Prior to using for the first time IIn order to remove any residues which may have been produced during pro-duction, wipe the dryer drum with a damp cloth or carry out a brief drying cy-cle ( TIME (TIEMPO) programme of 30 min.) with damp cloths in the m...

starting up for the first time electrolux 13 Special notes about Iron Aid • The following textiles cannot be treated using an Iron Aid pro-gramme:woollen knitwear, leather, textiles with large metal, wooden or plastic parts, textiles with rusting metal parts, oilskins or wax cotton gar-ments. • To s...

14 electrolux iron aid TM - steam-system Iron Aid TM - Steam-System Fill water tank You must fill up the water tank before using an Iron Aid programme for the first time. Use the distilled water provided if there is not yet any condensed water from previous drying programmes (see chapter on ‘Cleanin...

iron aid TM - steam-system electrolux 15 2. Fill with distilled water from the can- ister provided, up to the MAX mark inside the container. 3. Push filler neck and drawer with con- densed water container back in. When dry, all textiles not specifically prohibited in the chapter ‘Sorting and prepari...

16 electrolux overview of iron aidtm programmes Overview of Iron Aid TM programmes All information on applications is for guidance only. Smoothing results may vary depending on the selected programme and especially the fit-tings and material properties of the textile. The results can be improved if ...

18 electrolux overview of iron aidtm programmes Selecting the programme Use the programme selector to set the programme you require. The estimated programme duration without drying cy-cle (in minutes) appears in the display. Select steam level (LOAD - CAR-GA) To achieve the best results, differ- ent...

overview of iron aidtm programmes electrolux 19 Important: If in doubt, always select a lower steam level first until you have more experience with load vol-umes, fabric types and the corre-sponding optimum steam level.If too high a steam level is selected, garments may lose their shape. If too low ...

20 electrolux overview of iron aidtm programmes Delay timer With the DELAY (INICIO DIFERIDO) button, you can delay the start of a programme by between 30 minutes ( 30 ') and a maximum of 20 hours ( 20h ). 1. Select the programme and addition- al functions. 2. Press the DELAY (INICIO DIFERIDO) button...

starting an iron aidtm programme electrolux 21 Starting an Iron Aid TM pro- gramme Press the START/PAUSE (INICIO/PAU-SA) button. The programme is started.First, the drying phase indicator appears in the display. The display will also show the pro-gramme duration for the selected Iron Aid programme, ...

drying electrolux 23 Drying Overview of drying programmes Programmes Ma x. load (W eig h t w h e n d ry) Additional- functions Application/properties Care sym- bols BUZ Z ER (ALAR M A) DE LICA TE (DE L ICA D O) DR YNESS (GR A DO DE S.) CO TTO N (ALGO D Ó N ) EXTRA (EXTRASECO) 6 kg • • • Thorough dry...

24 electrolux overview of drying programmes Selecting the programme Use the programme selector to set the programme you require. The probable programme run time is displayed (in minutes) on the multi-display. Selecting additional functions You can choose from the additional functions DRYNESS (GRADO ...

overview of drying programmes electrolux 25 Caution: Make sure that by select-ing the DRYNESS (GRADO DE SEC.) function, you do not over-dry your wool or silk. DELICATE (DELICADO) For especially gentle drying of sensitive fabrics with the l care label and for temperature-sensitive textiles (e.g. acry...

26 electrolux overview of drying programmes TIME (TIEMPO) To select the programme duration after setting the TIME (TIEMPO) pro- gramme. You can select a programme duration from 10 mins to 3 hrs in 10-minute steps. 1. Turn the programme knob to the TIME (TIEMPO) programme. The display will show 0.10 ...

starting a drying programme electrolux 27 Starting a drying programme Press the START/PAUSE (INICIO/PAU-SA) button. The programme is started.The programme progress display shows drying progress. The symbols for DRYING and COOLING appear in the display one after the other. The number of droplets in t...

28 electrolux cleaning and maintenance Cleaning and maintenance Cleaning lint filters To ensure that the appliance works per-fectly, the lint filters in the door and in front of the drum must be cleaned after every Iron Aid or drying cycle. Important Never operate the dryer without the lint filter o...

cleaning and maintenance electrolux 29 Cleaning the filter area The filter area does not have to be cleaned after every drying cycle, but should be checked regularly and cleaned of fluff, if necessary. You will need to undertake the following (to clean the filter area:1. Remove lint filter (see chap...

30 electrolux cleaning and maintenance Emptying the condensed water container Empty condensed water container after every drying cycle. If the condensate tank is full, an active programme will break off automatically and the CONTAINER display will light up. In order to continue the programme, the co...

cleaning and maintenance electrolux 31 4. The condensed water be used as distilled water, e.g. for steam irons. However, first filter the condensed water to remove any residues and small pieces of fluff. Using the attached canister to filter:Pour the water out of the container straight through the f...

cleaning and maintenance electrolux 33 Emptying the water tank for long periods of disuse If Iron Aid programmes are not run for more than three weeks, the tank should be emptied and refilled with fresh dis-tilled water if required.1. Open door in plinth in front of heat exchanger (see chapter on ‘C...

34 electrolux cleaning and maintenance Cleaning heat exchanger If the HEAT EXCHANGER display is illu-minated, the heat exchanger needs to be cleaned. Caution! Operating when the heat exchanger is clogged with lint can damage the appliance. This also in-creases energy consumption. 1. Open loading doo...

cleaning and maintenance electrolux 35 Caution! Do not use sharp objects to clean the heat exchanger. You could damage it an cause leaks. 7. Clean heat exchanger. It is best to use a brush or to rinse thoroughly with a shower head. 8. Replace heat exchanger and lock into place (turn both lock washer...

36 electrolux what to do if… What to do if… Remedying small malfunctions If, during operation, the error code ( E plus number or letter) appears on the multi-display: Switch the appliance off and on again. Reset programme. Press the START/PAUSE (INICIO/PAUSA) button. If the error appears again, plea...

38 electrolux technical data Technical data 5 This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Di-rective 92/31/EEC – 93/68/EEC dated 22.07.1993 CE Marking Directive Consumpt...

installation safety instructions electrolux 39 Installation safety instructions • Important! The appliance must be moved in vertical position for trans-port. • Before first starting up, all parts of the transport safety equipment must be removed. The machine may oth-erwise be damaged. • The applianc...

40 electrolux removing transport safety equipment Removing transport safety equipment Caution! Before first starting up, all parts of the transport safety equipment must be removed. 1. Open loading door2. Pull off adhesive strips from inside machine on top of drum. 3. Remove foil hose and polystyren...

special accessories electrolux 41 Levelling the appliance The four feet of the appliance are pre-adjusted. Large degrees of unevenness can be compensated for by individually adjust-ing the height adjustable screw feet. To do this lift the appliance and turn the adjustable feet in or out. Important D...

42 electrolux guarantee/customer service Guarantee/Customer Service European Guarantee Weitere Kundendienststellen im Ausland In diesen Ländern gelten die Ga-rantiebedingungen der örtlichen Partner. Diese können dort ein-gesehen werden. Further after-sales service agencies overseas In these countrie...

service electrolux 43 Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the op-erating instructions (section “What to do if…”). If you were not able to remedy the prob-lem yourself, please contact the Cus-tomer Care Department o...