Eizo T57S - Manual

6 1 FEATURES 1 FEATURES Features FlexScan ® for wide compatibility • 30 to 92 kHz horizontal scanning, 50 to 160 Hz vertical scanning with automatic adjustment. • The built-in microprocessor allows user-adjustable color control adjustments to control screen distortion, and memorization of user-adjus...

E 7 1 FEATURES 1) As an Energy Star Partner, EIZO NANAO CORPORATION has determined that this product meets the Energy Star guidelines for energy efficiency. Functions Windows 95/98 Plug & Play ........ Readme.txt in the EIZO Utility Disk • This model complies with VESA DDC1/DDC2B standards and s...

8 1 FEATURES Maintenance Port • The monitor is equipped with a maintenance port on the rear panel. This is provided so that complementary products can be utilized.ScreenManager Pro, a utility software kit (supplied as optional), isavailable which allows screen color, convergence and various geomet-r...

E 9 2 IMAGING ADJUSTMENT - Screen menu - All of the icons shown in the ScreenManager 'Screen' menu are describedbelow. • Allow the monitor to stabilize for at least 30 minutes before makingimage adjustments. Brightness, Contrast, Size, Position These functions are used to adjust the brightness, cont...

10 2 IMAGING ADJUSTMENT (Every-other-dot pattern) (Moiré) Convergence Displayed characters and images may appear fuzzy or have tinges of red,green, or blue if the electron beams do not converge correctly. These can beadjusted by the convergence adjustment feature in the ScreenManager. What is conver...

12 3 COLOR ADJUSTMENT Custom modeSets color temperature.Allows for specific adjustments to Red,Green and Blue (R/G/B). This consists ofthe Cutoff and Gain functions. For use when highprecision coloradjustment is necessary(i.e. when there is a needto obtain identical colorson multiple monitors* ormat...

E 13 3 COLOR ADJUSTMENT C o l o r T e m p r a t u r e Adjusting the Standard mode • Users should allow at least 30 minutes for the monitor to stabilizebefore setting the color adjustments or color matching. Procedure 1) Go to the 'Color' menu. 2) Select the “Standard mode” setting from the 'Color mo...

14 3 COLOR ADJUSTMENT Adjusting the Custom mode Cutoff and Gain adjustments Monitors use red, green and blue (R, G, and B) to convey colorinformation. They use an additive method to combine differentamounts of the primary colors to produce a desired color. In otherwords, monitors start with no light...

E 19 4 POWER-SAVE SETUP VESA DPMS System 1) First, make the appropriate settings for the PC. (See note, page 18.) 2) Then select 'VESA DPMS'. 3) Set the delay period, which is the interval that the monitor will wait after receiving a power-save signal from the PC, before entering intoMode 1 or Mode ...

20 4 POWER-SAVE SETUP NUTEK System 1) First make the appropriate ScreenSaver settings (Macintosh/Energy Saver) for the PC. 2) Then select 'NUTEK'. 3) Set the delay time, which is the interval between the time that the ScreenSaver (Macintosh/EnergySaver) blanks the screen and the timethat the monitor...

22 5 OTHER SETTINGS 5 OTHER SETTINGS - Others, Information and Language menus - All of the icons shown in the ScreenManager 'Others' menu are describedbelow. Degaussing The monitor automatically degausses every time the power is turned ONand every time it is reactivated from the PowerManager power-s...

E 23 5 OTHER SETTINGS Input Priority This unique feature of the ScreenManager is for those users who utilizetwo PCs. It allows the user to set the priority on the PC of choice. The monitor automatically detects the selected 'Input Priority' settingevery time the power is turned ON (see note). Once t...

24 5 OTHER SETTINGS Beep Use this feature to set the beeper ON or OFF. If the beeper is ON, themonitor will generate beep signals as shown below. If the beeper is OFF,the monitor will not beep. Short beep • ScreenManager item selected.• ScreenManager parameter adjusted to minimum or maximum limit. •...

E 25 5 OTHER SETTINGS Information status report Use this feature to review the current ScreenManager settings. The menucontains four pages. Pressing the ENTER key selects the different pagesin order. The information displayed on each page is as follows. • Page 1: Input port, horizontal and vertical ...

26 6 GETTING THE MOST FROM YOUR MONITOR 6 GETTING THE MOST FROM YOUR MONITOR MD-C53A (optional) Adjustment Lock The ScreenManager operation can be disabled by holding down theAUTO-SIZING button while switching on the monitor’s power. This willdisable (“lock”) the ScreenManager and AUTO-SIZING button...

E 27 6 GETTING THE MOST FROM YOUR MONITOR Selecting the active input • The front panel’s BNC/D-Sub selection button can be used to select BNC or D-Sub as the active input. • The ScreenManager’s “Input Priority” setting (in the 'Others' menu) can be used to set up the automatic selection of the input...

28 6 GETTING THE MOST FROM YOUR MONITOR Chaining procedure 1) Attach BNC coaxial “Y” connectors to each of the BNC inputs (H, V, G, R and B) on the first monitor in the chain (call this Monitor A).Then connect the monitor to the PC, using a signal cable equipped withBNC connectors at the monitor sid...

E 29 6 GETTING THE MOST FROM YOUR MONITOR Optional i·Sound™ speaker system The optional speaker system i·Sound connects directly to the monitor andcan be used to support multimedia applications. The speaker also has amicrophone function. For details, consult EIZO dealers.

30 7 TROUBLESHOOTING 7 TROUBLESHOOTING Troubleshooting This page presents problems that can be corrected by the user. If aproblem persists even after applying the suggested remedies, contact anEIZO dealer. Points to check with possiblesolutions • The termination switch on the rear of the monitor sho...

E 31 7 TROUBLESHOOTING • Error messages will remain on the screen for 30 seconds, and then disappear. Anerror message may not appear at all if the signal frequency is extremely high orextremely low. • Check that the PC is switched ON. • Check that the signal cable is properly connected to the graphi...

34 7 TROUBLESHOOTING • The CRT is not warmed up. Allow 30 minutes for the monitor to stabilize. • Allow 30 minutes for the monitor to warm up. • Degauss the screen. (Use the degaussing feature in the ScreenManager’s 'Others' menu. See page 22.) • Allow 30 minutes for the monitor to warm up. • Adjust...

E 37 8 CLEANING 8 CLEANING WARNING CAUTION • Keep liquids away from the monitor. Spillage into the cabinet may result in fire, electric shock, orequipment damage. If an object or liquid falls/spills into the cabinet, unplug the monitorimmediately. Have the unit checked by a qualified service enginee...

38 9 SPECIFICATIONS 9 SPECIFICATIONS Electrical Specifications CRT AG Pitch 0.25 mm (Aperture Grille) CRT Size 45 cm (17 inch) class90° deflection Aperture Grille type CRT Surface Anti-Reflective SuperErgoCoat ® Scan Frequency Horizontal: 30 kHz-92 kHz (Automatic) Vertical: 50 Hz-160 Hz (Automatic) ...

124 APPENDIX Pin AssignmentPin-BelegungAffectation des Broches D-Sub mini 15 pin connector Pin No. Signal Pin No. Signal 1 Red video 9 No pin 2 Green video 10 Ground 3 Blue video 11 (shorted) 4 Ground 12 Data 5 No pin 13 H. Sync 6 Red ground 14 V. Sync 7 Green ground 15 Clock 8 Blue ground BNC conne...

125 APPENDIX A Preset Timing Chart Timing-Übersichten Synchronisation des Signaux Based on the signal diagram shown below, 4 factory presets have beenregistered in the monitor's microprocessor. Der integrierte Mikroprozessor des Monitors unterstützt 4 werkseitigeStandardeinstellungen (siehe hierzu d...

126 APPENDIX VGA (text) n 720 dots × 400 lines mode Unit A B C D E F µs 0.636 3.813 1.907 6.356 25.422 31.778 Dot 18 108 54 180 720 900 ms 0.381 0.064 1.111 1.556 12.712 14.268 Line 12 2 35 49 400 449 Frequencies: fd/28.322 MHz, fH/31.468 kHz, fV/70.087 Hz Interlace: Non Sync Polarity: H/Negative, V...

For Europe, etc. (220-240 Vac) Only CE Marking Declaration of Conformity Kind of equipment: Monitor Type-designation: T57S (Model No. MA-1792) is in compliance with: Council Directive 73/23/EEC EN60950:1992+A1+A2+A3 Council Directive 89/336/EEC EN55022 (classB):1995 EN50082-1:1992 EN61000-3-2:1995 E...

Hinweis zur Ergonomie : Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach ZH1/618/10.80 (GS-VW-SG7/01.97) mit dem Videosignal, 1280 Punkte x 1024Zeilen, RGB analog, 0,7Vp-p und mindestens 85,0Hz Bildwiederholfrequenz,non interlaced. Weiterhin wird aus ergonomischen Gründen empfohlen, di...