Page 2 - Location of Caution Statement
2 Location of Caution Statement Ex.FlexStand2 This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside this region, the product may not perform as stated in the specifications. No part of this manual may be reproduced, stored in a re...
Page 3 - Notice for this monitor
3 Noticeforthismonitor Notice for this monitor This product is suited to general purposes like creating documents, viewing multimedia content. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may no...
Page 4 - Cleaning; To use the monitor comfortably
4 Noticeforthismonitor Cleaning Attention • Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or panel, and also quality deterioration of the image. • Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the c...
Page 5 - CONTENTS
5 CONTENTS CONTENTS Cover ...................................................................... 1Notice for this monitor ......................................... 3 Cleaning .................................................................... 4To use the monitor comfortably ...........................
Page 7 - Chapter 1 Introduction
7 Chapter1Introduction Chapter 1 Introduction Thank you very much for choosing an EIZO color LCD monitor. 1-1. Features • 22.0″ wide format LCD• Supports a resolution of 1680 × 1050• Applicable to DisplayPort (applicable to 8 bit) *1 The DisplayPort input receives both an image signal and an audio...
Page 9 - Front
9 Chapter1Introduction 1-2. Controls and Functions ● Front 7 66 7 88 99 55 22 11 33 44 7 66 7 88 99 55 22 11 33 44 Settingmenu *1 Settingmenu *1 FlexStand2 TriStand2 1. EcoView Sense sensor Detectsthemovementofapersoninfrontofthemonitor(EcoViewSensefunction( page 33 )). 2. Ambient...
Page 10 - Rear
10 Chapter1Introduction ● Rear 13 16 15 14 13 16 15 14 21 21 1011 12 20 19 18 17 20 19 18 17 1011 12 FlexStand2 TriStand2 *3 10. Main power switch Turnsthemainpoweronoroff. 11. Power connector Connectsthepowercord. 12. Input signal connector Left:DisplayPortconnector/Center:DVI-Dcon...
Page 11 - Disk contents and software overview; Item
11 Chapter1Introduction 1-3. EIZO LCD Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with this product. The following table shows the disk contents and the overview of the software programs. ● Disk contents and software overview The disk includes software programs for adjustment, and...
Page 12 - Basic operation of the Setting menu; Displaying the Setting menu
12 Chapter1Introduction 1-4. Basic Operations and Functions ● Basic operation of the Setting menu 1. Displaying the Setting menu 1. Press . The Setting menu appears. 2. Adjusting / Setting 1. Choose a menu to adjust / set with , , and then press . The Sub menu appears. 2. Choose an item to adjust ...
Page 13 - Functions; Main menu
13 Chapter1Introduction ● Functions The following table shows the Setting menu and setting items of each menu. Main menu Setting Reference Color *1 Brightness “2-3.AdjustingColor”(page16) ContrastTemperatureGammaAdvancedSettings SaturationHueGain ColorReset “Toresetthecoloradjustments”(...
Page 14 - Chapter 2 Adjusting Screens
14 Chapter2AdjustingScreens Chapter 2 Adjusting Screens 2-1. Compatible Resolutions The monitor supports the following resolutions. ● Analog Input (D-Sub) Resolution Applicable Signals Vertical Scan Frequency Dot Clock 640×480 VGA 60Hz 146.25MHz (Max.) 800×600 VESA 60Hz 1024×768 VESA 60...
Page 15 - Windows 8 / Windows 7; Mac OS X
15 Chapter2AdjustingScreens 2-2. Setting the Resolution When you connect the monitor to the PC and find that the resolution is improper, or when you want to change the resolution, follow the procedure below. ● Windows 8 / Windows 7 1. For Windows 8, click the “Desktop” tile on the Start Screen to...
Page 16 - To select the display mode (FineContrast Mode); Display Modes; Procedure
16 Chapter2AdjustingScreens 2-3. Adjusting Color ● To select the display mode (FineContrast Mode) This function allows easy selection of a desired mode according to monitor application. Display Modes Mode Purpose User1 Selectthistodefineadesiredsetofparametersettings. User2sRGB Suitable...
Page 17 - To perform advanced adjustments; Adjustable settings in each mode
17 Chapter2AdjustingScreens ● To perform advanced adjustments The “Color” menu of the Setting menu allows you to set and save the independent color adjustment for each mode. Attention • It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more ...
Page 18 - To adjust contrast; To adjust color temperature; Adjustable range
18 Chapter2AdjustingScreens ● To adjust contrast The brightness of the screen is adjusted by varying the video signal level. Adjustable range 0 to 100 Procedure 1. Choose “Color” in the Setting menu, and press . 2. Choose “Contrast” in the “Color” menu, and press . The “Contrast” menu appears. 3....
Page 19 - To adjust gamma; To adjust the color saturation
19 Chapter2AdjustingScreens ● To adjust gamma Gamma can be adjusted. The brightness of the monitor varies depending on the input signal, however, the variation rate is not proportional to the input signal. To keep the balance between the input signal and the brightness of the monitor is called as...
Page 20 - To adjust hue; To adjust gain
20 Chapter2AdjustingScreens ● To adjust hue This function allows you to adjust hue. Adjustable range -50 to 50 Procedure 1. Choose “Color” in the Setting menu, and press . 2. Choose “Advanced Settings” in the “Color” menu, and press . 3. Choose “Hue” in the “Advanced Settings” menu, and press . T...
Page 21 - Digital Signal Input; Analog Signal Input; Setting Procedures
21 Chapter2AdjustingScreens 2-4. Screen Adjustment ● Digital Signal Input When digital signals are input, images are displayed correctly based on the preset data of the monitor, but if characters and / or lines appear blurred, go to “To modify blurred characters / lines” (page 24) . When performi...
Page 22 - Prepare to use analog screen adjustment patterns.; To eliminate vertical bars
22 Chapter2AdjustingScreens 2. Prepare to use analog screen adjustment patterns. Load the “EIZO LCD Utility Disk” to your PC, and then open the “Screen adjustment pattern files”. Note • For details and instructions on opening the “Screen adjustment pattern files”, refer to the Readme.txt file. 3....
Page 23 - To remove flickering or blurring; To correct the screen position
23 Chapter2AdjustingScreens ● To remove flickering or blurring Procedure 1. Choose “Analog Adjustment” in the “Screen” menu, and press . 2. Choose “Phase” in the “Analog Adjustment” menu, and press . The “Phase” menu appears. 3. Adjust the phase with or to minimize flickering or blurring.4. Press...
Page 24 - Adjusting color gradation.; To adjust color gradation automatically; Modify blurred characters or lines.; To modify blurred characters / lines
24 Chapter2AdjustingScreens 5. Adjusting color gradation. ● To adjust color gradation automatically Every color gradation (0 to 255) can be displayed by adjusting the signal output level. Procedure 1. Display Pattern 2 in full screen on the monitor using the “Screen adjustment pattern files”. 2. ...
Page 25 - Screen Size Changing; Setting; To adjust brightness of non-display area
25 Chapter2AdjustingScreens 2-5. Screen Size Changing ● Screen Size Changing The image with the resolution other than the recommended resolution is displayed in full screen automatically. You can change the screen size by using the “Screen Size” function. Setting Function FullScreen Displaysan...
Page 26 - Chapter 3 Setting Monitor; -2. Selecting sound source while using the DisplayPort
26 Chapter3SettingMonitor Chapter 3 Setting Monitor 3-1. Adjusting Volume This function allows you to adjust the volume. Adjustable range 0 to 30 Procedure 1. Press . 2. Use or for adjustment.3. Press to exit. Note • The volume for the speakers and the headphone can be set individually. 3-2. Sele...
Page 27 - -3. Compensating viewing angle deficiency
27 Chapter3SettingMonitor 3-3. Compensating viewing angle deficiency When the screen is to be viewed from below, the viewing angle can be compensated for so the screen looks as if it is being seen from directly ahead. -40˚ -20˚ Off Adjustable range -40˚, -20˚, Off Procedure 1. Choose “Monitor Set...
Page 29 - -8. Changing Setting Menu Display Position; Selectable languages
29 Chapter3SettingMonitor 3-8. Changing Setting Menu Display Position You can change the display position of the Setting menu. Procedure 1. Choose “Monitor Settings” in the Setting menu, and press . 2. Choose “Menu Settings” in the “Monitor Settings” menu, and press . 3. Choose “Menu Position” in...
Page 30 - -10. Resetting the Monitor to the Default Settings; To reset the color adjustments; To reset “EcoView Sense Settings”; To reset all adjustments to the default settings
30 Chapter3SettingMonitor 3-10. Resetting the Monitor to the Default Settings The setting values are reset to the default settings. Attention • After resetting, you cannot undo the operation. Note • Regarding the default setting, see “Main Default Settings” (page 49) . ● To reset the color adjust...
Page 31 - Chapter 4 Power Saving Functions; Monitor
31 Chapter4PowerSavingFunctions Chapter 4 Power Saving Functions 4-1. Setting Power Saving ● Monitor This function allows you to set the monitor into the power saving mode according to the PC status. When the monitor has shifted to the power saving mode, the images on the screen are not displaye...
Page 32 - Audio Output; Adjustment; Auto EcoView
32 Chapter4PowerSavingFunctions ● Audio Output This monitor allows you to turn off the audio output from the speakers / headphone at the power saving mode. Procedure 1. Choose “Sound” in the Setting menu, and press . 2. Choose “Power Save” in the “Sound” menu, and press . The “Power Save” menu a...
Page 33 - EcoView Optimizer 2; -4. Setting the power saving mode when a person
33 Chapter4PowerSavingFunctions ● EcoView Optimizer 2 Using the EcoView Optimizer 2 function automatically adjusts the screen brightness according to the white level of the input signal. This function can reduce the power consumption while maintaining the brightness specified by the input signal...
Page 36 - Chapter 5 Troubleshooting; Problem
36 Chapter5Troubleshooting Chapter 5 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local EIZO representative. 5-1. No picture Problem Possible cause and remedy 1. No picture • Powerindicatordoesnotlight. • Checkwhetherthepowercordisconne...
Page 40 - Chapter 6 Reference
40 Chapter6Reference Chapter 6 Reference 6-1. Attaching the Optional Arm An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our web site for the corresponding optional arm (or optional stand). http://www.eizo.com Attention • When attaching an arm ...
Page 41 - Detaching procedure
41 Chapter6Reference 6-2. Detaching / Attaching the TriStand2 Stand Base Note • There are 2 types of shapes for the stand brace and the base mounting section (refer to the figures in the procedure). Check the shape of the monitor you have purchased. Detaching procedure The Stand base that was atta...
Page 42 - Attaching procedure; Place the monitor on a stable surface.
42 Chapter6Reference Attaching procedure The once removed the Stand base can be attached to the monitor again with the following procedures. 1. Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down. 2. Hold the Stand base with the “REAR” side facing...
Page 45 - Connection examples; To switch among input signals
45 Chapter6Reference 6-4. Connecting Multiple PCs The product has multiple connections to PCs and allows you to switch to one of the connections for display. Connection examples DVIconnector Signalcable (suppliedFD-C39) Signalcable (suppliedPP200) DVI-Dconnector Digital(DVI) Digital (Dis...
Page 46 - To set input signal selection; Required System Environment
46 Chapter6Reference ● To set input signal selection Setting Function Auto ThemonitorrecognizestheconnectorthroughwhichPCsignalsareinput.WhenaPCisturnedofforentersthepowersavingmode,themonitorautomaticallydisplaysanothersignal. Manual Themonitordisplaysthesignalfrom...
Page 47 - Connection Procedure (Setup of USB Function)
47 Chapter6Reference ● Connection Procedure (Setup of USB Function) 1. Connect the monitor first to a PC using the signal cable, and run the PC.2. Connect the USB cable between the USB downstream port of the PC and the USB upstream port of the monitor. The USB hub function is set up automatically ...
Page 49 - Main Default Settings
49 Chapter6Reference Movablerange FlexStand2 Tilt: 30˚Up,0˚Down Swivel: 344˚ Adjustableheight: 195mm(7.7inch)(174.5mm(6.9inch)fortiltof0˚) Rotation: 90˚(Clockwise) TriStand2 Tilt: 25˚Up,0˚Down Swivel: 344˚ Adjustableheight: 60mm(2.36inch) EnvironmentalConditions Temperatur...
Page 50 - Outside Dimensions; TriStand2; Accessories
50 Chapter6Reference ● Outside Dimensions FlexStand2 Unit:mm 320 PIVOT 90° SWIVEL 125 30° 30° 95 TILT 315 344° 200 100 200 113.35 100 605 298.1 14.3 12.1 105 500 475.8 180.5 174.5 12.5° 113.15 14.1 326.5 22.5 53.9 360 73 245.5 26 15 349 28.5 60.5 191.5 50.5 23.5 269 344.5 518 343.5 245.5 234.5 53...
Page 52 - Chapter 7 Glossary; Clock
52 Chapter7Glossary Chapter 7 Glossary Clock The analog signal input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog signal is converted to a digital signal for image display. This is called clock adjustment. If the clock pul...
Page 54 - Appendix; Trademark
54 Appendix Appendix Trademark The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries.The DisplayPort Compliance Logo and VESA are registered trademarks of the Video Elect...
Page 55 - ENERGY STAR
55 Appendix ENERGY STAR As an ENERGY STAR Partner, EIZO Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency. TCO This product has acquired the TCO standard that relates to the safety, ergonomics (EcoView Optimizer 2: Off ), environment and so forth of ...
Page 56 - FCC Declaration of Conformity; We, the Responsible Party; Canadian Notice
56 Appendix FCC Declaration of Conformity For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZOInc.5710WarlandDrive,Cypress,CA90630Phone:(562)431-5011 declare that the product Tradename:EIZOModel:FlexScanEV2216W is in conformity...
Page 57 - Hinweis zur Ergonomie :
57 Appendix Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der Auswahl des S...
Page 58 - LIMITED WARRANTY
58 Appendix LIMITED WARRANTY LIMITED WARRANTY EIZO Corporation (hereinafter referred to as “ EIZO ”) and distributors authorized by EIZO (hereinafter referred to as the “ Distributors ”)warrant,subjecttoandinaccordancewiththetermsofthislimitedwarranty(hereinafterrefer...
Page 59 - BEGRENZTE GARANTIE
59 Appendix BEGRENZTE GARANTIE EIZO Corporation (im Weiteren als „ EIZO “ bezeichnet) und die Vertragsimporteure von EIZO (im Weiteren als „ Vertrieb(e) “ bezeichnet) garantieren dem ursprünglichen Käufer (im Weiteren als „ Erstkäufer “ bezeichnet), der das in diesemDok...
Page 60 - GARANTIE LIMITÉE
60 Appendix GARANTIE LIMITÉE EIZO Corporation (ci-après dénommé « EIZO ») et les distributeurs autorisés par EIZO (ci-après dénommés « Distributeurs »), sous réserve et conformément aux termes de cette garantie limitée (ci-après dénommée « Garantie »), garantissent à ...
Page 61 - GARANTÍA LIMITADA
61 Appendix GARANTÍA LIMITADA EIZO Corporation (en lo sucesivo “ EIZO ”) y sus distribuidores autorizados (en lo sucesivo los “ Distribuidores ”), con arreglo y de conformidad con los términos de esta garantía limitada (en lo sucesivo la “ Garantía ”), garantizan al...
Page 62 - GARANZIA LIMITATA
62 Appendix GARANZIA LIMITATA EIZO Corporation (a cui si farà riferimento da qui in poi con “ EIZO ”) ed i Distributori autorizzati da EIZO (a cui si farà riferimento da qui in poi con “ Distributori ”) garantiscono, secondo i termini di questa garanzia limitata...
Page 63 - BEGRÄNSAD GARANTI
63 Appendix BEGRÄNSAD GARANTI EIZOCorporation(nedankallat“ EIZO ”)ochEIZOsauktoriseradedistributörer(nedankallade“ Distributörer ”)garanterar i enlighet med villkoren i denna begränsade garanti (nedan kallad “ Garantin ”) den ursprunglige köparen (nedan kallad den “ Urs...
Page 64 - ΠΕΡΙΟΡΙΣΜΕΝΗ ΕΓΓΥΗΣΗ
64 Appendix ΠΕΡΙΟΡΙΣΜΕΝΗ ΕΓΓΥΗΣΗ Η EIZO Corporation (στο εξής « EIZO ») και οι διανομείς που εξουσιοδοτεί η EIZO (στο εξής « Διανομείς ») παρέχουν εγγύηση, υποκείμενη και σύμφωνα με τους όρους της παρούσας περιορισμένης εγγύησης (στο εξής « Εγγύηση »),στοναρχικόαγορασ...
Page 65 - ОГРАНИЧЕННАЯ ГАРАНТИЯ
65 Appendix ОГРАНИЧЕННАЯ ГАРАНТИЯ EIZO Corporation (называемая в дальнейшем “ EIZO ”) и авторизированные EIZO дистрибуторы (называемые в дальнейшем“ Дистрибуторы ”)гарантируют,всоответствиисусловиямиипунктамиэтойограниченнойгарантии (называемойвдальнейшем“ Гарантия ”),пер...
Page 66 - 有限责任保证书
66 Appendix 有限责任保证书 EIZO Corporation ( 以下简称 “ EIZO ”) 和 EIZO 授权的经销商 ( 以下简称 “ 经销商 ”), 接受并依照本有限责任保证书 ( 以 下简称 “ 保证书 ”) 之条款 , 向从 EIZO 和经销商购买本文中所规定产品 ( 以下简称 “ 产品 ”) 的原买方 ( 以下称 “ 原买方 ”) 提供保证 : 在保证期内 ( 规定如下 ), 如果原买方发现按本产品所附使用说明书 ( 以下简称 “ 用户手册 ”) 所述方式正常使 用本产品过程中 , 本产品出现故障或损坏 , EIZO 和经销商根据其独自的判断免费修理或更换该产品 。...
Page 67 - Recycling Information
67 Appendix Recycling Information Recycling Information This product, when disposed of, is supposed to be collected and recycled according to your country’s legislationtoreduceenvironmentalburden.Whenyoudisposeofthisproduct,pleasecontactadistributoror anaffiliatein...
Page 70 - Информация относно рециклиране; Informaţie referitoare la reciclare; Geri Dönüşüm Bilgisi
70 Appendix Информация относно рециклиране Приизхвърлянетонатозипродуктсепредлагасъбиранетоирециклиранетомусъобразнозаконитена вашатастраназадасенамализамърсяванетонаоколнатасреда.Когатоискатедасеосвободитеот тозипродукт,молясвържетесестърговскиямупредставители...
Page 71 - China Measures for RoHS Compliance in ChinaRoHS; 关于电子信息产品污染控制标识
71 Appendix China Measures for RoHS Compliance in ChinaRoHS 关于电子信息产品污染控制标识 本标识根据「电子信息产品污染控制管理办法」 ,适用于在中华人民共和国销售的电子信息产品。标识中央的 数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项,在自制造日起算的年限内,不会产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。 • 有毒有害物质或元素的名称及含量 部件名称 有毒有害物质或元素 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr(VI) ) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 印刷电路板...