Page 2 - Location of Caution Statement
2 Location of Caution Statement EV2316W / EV2336W (Ex.FlexStand2) EV2416W / EV2436W (Ex.FlexStand2) This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside this region, the product may not perform as stated in the specifications. No...
Page 3 - Notice for this monitor
3 Noticeforthismonitor Notice for this monitor This product is suited to general purposes like creating documents, viewing multimedia content. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may no...
Page 4 - Cleaning; To use the monitor comfortably; the environmental conditions.
4 Noticeforthismonitor Cleaning Attention • Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or panel, and also quality deterioration of the image. • Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the c...
Page 5 - CONTENTS
5 CONTENTS CONTENTS Cover ...................................................................... 1Notice for this monitor ......................................... 3 Cleaning .................................................................... 4To use the monitor comfortably ...........................
Page 7 - Chapter 1 Introduction
7 Chapter1Introduction Chapter 1 Introduction Thank you very much for choosing an EIZO color LCD monitor. 1-1. Features • 23.0″ wide format LCD (EV2316W / EV2336W)• 24.1″ wide format LCD (EV2416W / EV2436W)• Supports a resolution of 1920 × 1080 (EV2316W / EV2336W)• Supports a resolution of 1920 × ...
Page 9 - Front
9 Chapter1Introduction 1-2. Controls and Functions ● Front 6 7 8 9 5 2 1 3 4 6 7 8 9 5 2 1 3 4 6 7 8 9 5 2 1 3 4 Settingmenu *1 Settingmenu *1 FlexStand2 TriStand2 1. EcoView Sense sensor Detectsthemovementofapersoninfrontofthemonitor(EcoViewSensefunction( page 38 )). 2. Ambient l...
Page 10 - Rear
10 Chapter1Introduction ● Rear 13 16 15 14 13 16 15 14 21 20 19 18 17 20 19 18 17 1011 12 21 1011 12 FlexStand2 *3 TriStand2 10. Main power switch Turnsthemainpoweronoroff. 11. Power connector Connectsthepowercord. 12. Input signal connector Left:DisplayPortconnector/Center:DVI-Dcon...
Page 11 - Disk contents and software overview; Item
11 Chapter1Introduction 1-3. EIZO LCD Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with this product. The following table shows the disk contents and the overview of the software programs. ● Disk contents and software overview The disk includes software programs for adjustment, and...
Page 12 - Basic operation of the Setting menu; Displaying the Setting menu; Choose “Return” from the Sub menu and press
12 Chapter1Introduction 1-4. Basic Operations and Functions ● Basic operation of the Setting menu 1. Displaying the Setting menu 1. Press . The Setting menu appears. 2. Adjusting / Setting 1. Choose a menu to adjust / set with , , and then press . The Sub menu appears. 2. Choose an item to adjust ...
Page 13 - Functions; Main menu
13 Chapter1Introduction ● Functions The following table shows the Setting menu and setting items of each menu. Main menu Setting Reference Color *1 Brightness “2-3.AdjustingColor”(page19) ContrastTemperatureGammaAdvancedSettings SaturationHueOverdrive *2 Gain ColorReset “Toresetthecolora...
Page 14 - Chapter 2 Adjusting Screens; The monitor supports the following resolutions.
14 Chapter2AdjustingScreens Chapter 2 Adjusting Screens 2-1. Compatible Resolutions The monitor supports the following resolutions. ● EV2316W Analog Input (D-Sub) Resolution Applicable Signals Vertical Scan Frequency Dot Clock 640×480 VGA 60Hz 148.5MHz (Max.) 800×600 VESA 60Hz 1024×768 V...
Page 18 - Windows 8 / Windows 7; for “Screen resolution” under “Display”.; Mac OS X
18 Chapter2AdjustingScreens 2-2. Setting the Resolution When you connect the monitor to the PC and find that the resolution is improper, or when you want to change the resolution, follow the procedure below. ● Windows 8 / Windows 7 1. For Windows 8, click the “Desktop” tile on the Start Screen to...
Page 19 - To select the display mode (FineContrast Mode); Display Modes; Procedure; The mode among the list is highlighted in turn each time
19 Chapter2AdjustingScreens 2-3. Adjusting Color ● To select the display mode (FineContrast Mode) This function allows easy selection of a desired mode according to monitor application. Display Modes Mode Purpose User1 Selectthistodefineadesiredsetofparametersettings. User2sRGB Suitable...
Page 20 - To perform advanced adjustments; Adjustable settings in each mode
20 Chapter2AdjustingScreens ● To perform advanced adjustments The “Color” menu of the Setting menu allows you to set and save the independent color adjustment for each mode. Attention • It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more ...
Page 21 - To adjust contrast; Choose “Color” in the Setting menu, and press; To adjust color temperature; Adjustable range; Choose “Color” in the Setting menu, and press
21 Chapter2AdjustingScreens ● To adjust contrast The brightness of the screen is adjusted by varying the video signal level. Adjustable range 0 to 100 Procedure 1. Choose “Color” in the Setting menu, and press . 2. Choose “Contrast” in the “Color” menu, and press . The “Contrast” menu appears. 3....
Page 22 - To adjust gamma; To adjust the color saturation
22 Chapter2AdjustingScreens ● To adjust gamma Gamma can be adjusted. The brightness of the monitor varies depending on the input signal, however, the variation rate is not proportional to the input signal. To keep the balance between the input signal and the brightness of the monitor is called as...
Page 23 - To adjust hue
23 Chapter2AdjustingScreens ● To adjust hue This function allows you to adjust hue. Adjustable range -50 to 50 Procedure 1. Choose “Color” in the Setting menu, and press . 2. Choose “Advanced Settings” in the “Color” menu, and press . 3. Choose “Hue” in the “Advanced Settings” menu, and press . T...
Page 24 - To adjust gain
24 Chapter2AdjustingScreens ● To adjust gain The brightness of each color component red, green, and blue is called “Gain”. You can change the hue of “white” by adjusting gain. Adjustable range 0 to 100 Procedure 1. Choose “Color” in the Setting menu, and press . 2. Choose “Advanced Settings” in t...
Page 25 - Digital Signal Input; When performing more advanced adjustment, see; Analog Signal Input; Setting Procedures; Choose “Screen” in the Setting menu, and press
25 Chapter2AdjustingScreens 2-4. Screen Adjustment ● Digital Signal Input When digital signals are input, images are displayed correctly based on the preset data of the monitor, but if characters and / or lines appear blurred, go to “To modify blurred characters / lines” (page 28) . When performi...
Page 26 - Prepare to use analog screen adjustment patterns.; Choose “Screen” in the Setting menu, and press; To eliminate vertical bars; Choose “Analog Adjustment” in the “Screen” menu, and press; Adjust the clock with or to eliminate vertical bars.
26 Chapter2AdjustingScreens 2. Prepare to use analog screen adjustment patterns. Load the “EIZO LCD Utility Disk” to your PC, and then open the “Screen adjustment pattern files”. Note • For details and instructions on opening the “Screen adjustment pattern files”, refer to the Readme.txt file. 3....
Page 27 - To remove flickering or blurring; To correct the screen position
27 Chapter2AdjustingScreens ● To remove flickering or blurring Procedure 1. Choose “Analog Adjustment” in the “Screen” menu, and press . 2. Choose “Phase” in the “Analog Adjustment” menu, and press . The “Phase” menu appears. 3. Adjust the phase with or to minimize flickering or blurring.4. Press...
Page 28 - Adjusting color gradation.; To adjust color gradation automatically; Modify blurred characters or lines.; To modify blurred characters / lines
28 Chapter2AdjustingScreens 5. Adjusting color gradation. ● To adjust color gradation automatically Every color gradation (0 to 255) can be displayed by adjusting the signal output level. Procedure 1. Display Pattern 2 in full screen on the monitor using the “Screen adjustment pattern files”. 2. ...
Page 29 - Screen Size Changing; Setting
29 Chapter2AdjustingScreens 2-5. Screen Size Changing ● Screen Size Changing The image with the resolution other than the recommended resolution is displayed in full screen automatically. You can change the screen size by using the “Screen Size” function. Setting Function FullScreen Displaysan...
Page 30 - To adjust brightness of non-display area; Choose “Monitor Settings” in the Setting menu, and press
30 Chapter2AdjustingScreens ● To adjust brightness of non-display area A border (black area with no image) around the image appears in the “Normal” or “Enlarged” mode. Border Procedure 1. Choose “Monitor Settings” in the Setting menu, and press . 2. Choose “Border Intensity” in the “Monitor Setti...
Page 31 - Chapter 3 Setting Monitor; This function allows you to adjust the volume.; -2. Selecting sound source while using the DisplayPort; Choose “Sound” in the Setting menu, and press
31 Chapter3SettingMonitor Chapter 3 Setting Monitor 3-1. Adjusting Volume This function allows you to adjust the volume. Adjustable range 0 to 30 Procedure 1. Press . 2. Use or for adjustment.3. Press to exit. Note • The volume for the speakers and the headphone can be set individually. 3-2. Sele...
Page 34 - -8. Changing Setting Menu Display Position; Selectable languages
34 Chapter3SettingMonitor 3-8. Changing Setting Menu Display Position You can change the display position of the Setting menu. Procedure 1. Choose “Monitor Settings” in the Setting menu, and press . 2. Choose “Menu Settings” in the “Monitor Settings” menu, and press . 3. Choose “Menu Position” in...
Page 35 - -10. Resetting the Monitor to the Default Settings; To reset the color adjustments; To reset “EcoView Sense Settings”; To reset all adjustments to the default settings
35 Chapter3SettingMonitor 3-10. Resetting the Monitor to the Default Settings The setting values are reset to the default settings. Attention • After resetting, you cannot undo the operation. Note • Regarding the default setting, see “Main Default Settings” (page 60) . ● To reset the color adjust...
Page 36 - Chapter 4 Power Saving Functions; Monitor; Choose “PowerManager” in the Setting menu, and press; This monitor complies with the VESA DPM standard.; • DVI; • DisplayPort
36 Chapter4PowerSavingFunctions Chapter 4 Power Saving Functions 4-1. Setting Power Saving ● Monitor This function allows you to set the monitor into the power saving mode according to the PC status. When the monitor has shifted to the power saving mode, the images on the screen are not displaye...
Page 37 - Audio Output; Adjustment; Auto EcoView
37 Chapter4PowerSavingFunctions ● Audio Output This monitor allows you to turn off the audio output from the speakers / headphone at the power saving mode. Procedure 1. Choose “Sound” in the Setting menu, and press . 2. Choose “Power Save” in the “Sound” menu, and press . The “Power Save” menu a...
Page 38 - EcoView Optimizer 2; -4. Setting the power saving mode when a person; Choose “EcoView Sense” in the “EcoView Menu”, and press
38 Chapter4PowerSavingFunctions ● EcoView Optimizer 2 Using the EcoView Optimizer 2 function automatically adjusts the screen brightness according to the white level of the input signal. This function can reduce the power consumption while maintaining the brightness specified by the input signal...
Page 40 - The EcoView menu allows you to check Power Reduction, CO
40 Chapter4PowerSavingFunctions 4-5. Checking the power saving level The EcoView menu allows you to check Power Reduction, CO 2 Reduction, and Eco Performance Level. The more indicators light up representing the Eco Performance Level, the higher the power saving level attained. Example: EV2436W ...
Page 41 - Chapter 5 Troubleshooting; Problem
41 Chapter5Troubleshooting Chapter 5 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local EIZO representative. 5-1. No picture Problem Possible cause and remedy 1. No picture • Powerindicatordoesnotlight. • Checkwhetherthepowercordisconne...
Page 46 - Chapter 6 Reference
46 Chapter6Reference Chapter 6 Reference 6-1. Attaching the Optional Arm An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our web site for the corresponding optional arm (or optional stand). http://www.eizo.com Attention • When attaching an arm ...
Page 47 - Detaching procedure
47 Chapter6Reference 6-2. Detaching / Attaching the TriStand2 Stand Base Note • There are 2 types of shapes for the stand brace and the base mounting section (refer to the figures in the procedure). Check the shape of the monitor you have purchased. Detaching procedure The Stand base that was atta...
Page 48 - Attaching procedure; Tighten the screw firmly to the end.; Place the monitor on a stable surface.
48 Chapter6Reference Attaching procedure The once removed the Stand base can be attached to the monitor again with the following procedures. 1. Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down. 2. Hold the Stand base with the “REAR” side facing...
Page 51 - Connection examples; To switch among input signals; The input signal switches each time
51 Chapter6Reference 6-4. Connecting Multiple PCs The product has multiple connections to PCs and allows you to switch to one of the connections for display. Connection examples DVIconnector Signalcable (suppliedFD-C39) Signalcable (suppliedPP200) DVI-Dconnector Digital(DVI) Digital (Dis...
Page 52 - To set input signal selection; Choose “Monitor Settings” from the Adjustment menu, and press; Required System Environment
52 Chapter6Reference ● To set input signal selection Setting Function Auto ThemonitorrecognizestheconnectorthroughwhichPCsignalsareinput.WhenaPCisturnedofforentersthepowersavingmode,themonitorautomaticallydisplaysanothersignal. Manual Themonitordisplaysthesignalfrom...
Page 53 - Connection Procedure (Setup of USB Function); Choose “Information” in the Setting menu, and press
53 Chapter6Reference ● Connection Procedure (Setup of USB Function) 1. Connect the monitor first to a PC using the signal cable, and run the PC.2. Connect the USB cable between the USB downstream port of the PC and the USB upstream port of the monitor. The USB hub function is set up automatically ...
Page 61 - TriStand2
61 Chapter6Reference TriStand2 Unit:mm(inch) 92.5 (3.64) 25° 113.5 (4.5) 100 (3.9) 172° 172° SWIVEL 60 (2.36) 95 (3.74) 11 (0.43) TILT 511.8 (20.1) 540 (21.3) 14.1 (0.56) 14.3 (0.56) 288.8 (1 1.4) 317.5 (12.5) 315 (12.4) 24.5 (0.96) 100 (3.9) 108.7 (4.3) 220 (8.7) 220 (8.7) 108.8 (4.3) 229 (9.0)...
Page 62 - Accessories
62 Chapter6Reference TriStand2 Unit:mm(inch) 552.5 (21.8) 520.4 (20.5) 358 (14.1) 16 (0.63) 326 (12.8) 92.5 (3.64) 25° 113.5 (4.5) 100 (3.9) 100 (3.9) 16.05 (0.63) 172° 172° SWIVEL 60 (2.36) 226.25 (8.9) 226.25 (8.9) 129 (5.1) 129 (5.1) 95 (3.74) 11 (0.43) TILT 229 (9.0) 315 (12.4) 349 (13.7) 70...
Page 63 - The following table shows factory preset analog signal timing.
63 Chapter6Reference 6-8. Preset Timing The following table shows factory preset analog signal timing. Attention • Display position may be deviated depending on the PC connected, which may require screen adjustment using Setting menu.• If a signal other than those listed in the table is input, adj...
Page 65 - Clock
65 Chapter6Reference 6-9. Glossary Clock The analog signal input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog signal is converted to a digital signal for image display. This is called clock adjustment. If the clock pulse i...
Page 66 - A signal transmission system for digital interface.
66 Chapter6Reference Overdrive This technology enhances response speed by increasing the potential difference at the time of motion of liquid-crystal pixels, and it is used for liquid-crystal TV sets and others in general. It provides clear-cut three-dimensional display with little afterimage, by ...
Page 67 - Appendix; Trademark
67 Appendix Appendix Trademark The DisplayPort Compliance Logo and VESA are registered trademarks of the Video Electronics Standards Association.Windows, Windows Vista, Windows Media, SQL Server, and Xbox 360 are registered trademarks of Microsoft Corporation in the United States and other countries...
Page 68 - ENERGY STAR
68 Appendix ENERGY STAR As an ENERGY STAR Partner, EIZO Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency. TCO This product has acquired the TCO standard that relates to the safety, ergonomics (EcoView Optimizer 2: Off ), environment and so forth of ...
Page 69 - FCC Declaration of Conformity; We, the Responsible Party; Canadian Notice
69 Appendix FCC Declaration of Conformity For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZOInc.5710WarlandDrive,Cypress,CA90630Phone:(562)431-5011 declare that the product Tradename:EIZOModel:FlexScanEV2316W/EV2336W/EV2416W/...
Page 70 - Hinweis zur Ergonomie :
70 Appendix Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der Auswahl des S...
Page 71 - LIMITED WARRANTY
71 Appendix LIMITED WARRANTY LIMITED WARRANTY EIZO Corporation (hereinafter referred to as “ EIZO ”) and distributors authorized by EIZO (hereinafter referred to as the “ Distributors ”)warrant,subjecttoandinaccordancewiththetermsofthislimitedwarranty(hereinafterrefer...
Page 72 - BEGRENZTE GARANTIE
72 Appendix BEGRENZTE GARANTIE EIZO Corporation (im Weiteren als „ EIZO “ bezeichnet) und die Vertragsimporteure von EIZO (im Weiteren als „ Vertrieb(e) “ bezeichnet) garantieren dem ursprünglichen Käufer (im Weiteren als „ Erstkäufer “ bezeichnet), der das in diesemDok...
Page 73 - GARANTIE LIMITÉE
73 Appendix GARANTIE LIMITÉE EIZO Corporation (ci-après dénommé « EIZO ») et les distributeurs autorisés par EIZO (ci-après dénommés « Distributeurs »), sous réserve et conformément aux termes de cette garantie limitée (ci-après dénommée « Garantie »), garantissent à ...
Page 74 - GARANTÍA LIMITADA
74 Appendix GARANTÍA LIMITADA EIZO Corporation (en lo sucesivo “ EIZO ”) y sus distribuidores autorizados (en lo sucesivo los “ Distribuidores ”), con arreglo y de conformidad con los términos de esta garantía limitada (en lo sucesivo la “ Garantía ”), garantizan al...
Page 75 - GARANZIA LIMITATA
75 Appendix GARANZIA LIMITATA EIZO Corporation (a cui si farà riferimento da qui in poi con “ EIZO ”) ed i Distributori autorizzati da EIZO (a cui si farà riferimento da qui in poi con “ Distributori ”) garantiscono, secondo i termini di questa garanzia limitata...
Page 76 - BEGRÄNSAD GARANTI
76 Appendix BEGRÄNSAD GARANTI EIZOCorporation(nedankallat“ EIZO ”)ochEIZOsauktoriseradedistributörer(nedankallade“ Distributörer ”)garanterar i enlighet med villkoren i denna begränsade garanti (nedan kallad “ Garantin ”) den ursprunglige köparen (nedan kallad den “ Urs...
Page 77 - ΠΕΡΙΟΡΙΣΜΕΝΗ ΕΓΓΥΗΣΗ
77 Appendix ΠΕΡΙΟΡΙΣΜΕΝΗ ΕΓΓΥΗΣΗ Η EIZO Corporation (στο εξής « EIZO ») και οι διανομείς που εξουσιοδοτεί η EIZO (στο εξής « Διανομείς ») παρέχουν εγγύηση, υποκείμενη και σύμφωνα με τους όρους της παρούσας περιορισμένης εγγύησης (στο εξής « Εγγύηση »),στοναρχικόαγορασ...
Page 78 - ОГРАНИЧЕННАЯ ГАРАНТИЯ
78 Appendix ОГРАНИЧЕННАЯ ГАРАНТИЯ EIZO Corporation (называемая в дальнейшем “ EIZO ”) и авторизированные EIZO дистрибуторы (называемые в дальнейшем“ Дистрибуторы ”)гарантируют,всоответствиисусловиямиипунктамиэтойограниченнойгарантии (называемойвдальнейшем“ Гарантия ”),пер...
Page 79 - 有限责任保证书
79 Appendix 有限责任保证书 EIZO Corporation ( 以下简称 “ EIZO ”) 和 EIZO 授权的经销商 ( 以下简称 “ 经销商 ”), 接受并依照本有限责任保证书 ( 以 下简称 “ 保证书 ”) 之条款 , 向从 EIZO 和经销商购买本文中所规定产品 ( 以下简称 “ 产品 ”) 的原买方 ( 以下称 “ 原买方 ”) 提供保证 : 在保证期内 ( 规定如下 ), 如果原买方发现按本产品所附使用说明书 ( 以下简称 “ 用户手册 ”) 所述方式正常使 用本产品过程中 , 本产品出现故障或损坏 , EIZO 和经销商根据其独自的判断免费修理或更换该产品 。...
Page 80 - Recycling Information; anaffiliateinyourcountry.
80 Appendix Recycling Information Recycling Information This product, when disposed of, is supposed to be collected and recycled according to your country’s legislationtoreduceenvironmentalburden.Whenyoudisposeofthisproduct,pleasecontactadistributoror anaffiliatein...
Page 83 - Информация относно рециклиране; затовавъввашатастрана.; Informaţie referitoare la reciclare; AdreseledecontactlegăsiţipepaginadewebalEIZO:; Geri Dönüşüm Bilgisi; ilgilikuruluşlatemasageçiniz.
83 Appendix Информация относно рециклиране Приизхвърлянетонатозипродуктсепредлагасъбиранетоирециклиранетомусъобразнозаконитена вашатастраназадасенамализамърсяванетонаоколнатасреда.Когатоискатедасеосвободитеот тозипродукт,молясвържетесестърговскиямупредставители...
Page 84 - China Measures for RoHS Compliance in ChinaRoHS; 关于电子信息产品污染控制标识; 本标识根据「电子信息产品污染控制管理办法」
84 Appendix China Measures for RoHS Compliance in ChinaRoHS 关于电子信息产品污染控制标识 本标识根据「电子信息产品污染控制管理办法」 ,适用于在中华人民共和国销售的电子信息产品。标识中央的 数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项,在自制造日起算的年限内,不会产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。 • 有毒有害物质或元素的名称及含量 部件名称 有毒有害物质或元素 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr(VI) ) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 印刷电路板...