Page 2 - Location of Caution Statement
2 Location of Caution Statement This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside this region, the product may not perform as stated in the specifications. No part of this manual may be reproduced, stored in a retrieval system...
Page 3 - Notice for this monitor
3 Noticeforthismonitor Notice for this monitor Aside from general purposes like creating documents, viewing multimedia content, this product is also suited to applications such as creations of images and graphics, and digital photo processing, where accurate color reproduction is a priority. This...
Page 4 - Cleaning; To use the monitor comfortably
4 Noticeforthismonitor Cleaning Attention • Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or panel, and also quality deterioration of the image. • Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the c...
Page 5 - CONTENTS
5 CONTENTS CONTENTS Cover ...................................................................... 1Notice for this monitor ......................................... 3 Cleaning .................................................................... 4To use the monitor comfortably ...........................
Page 7 - Chapter 1 Introduction
7 Chapter1Introduction Chapter 1 Introduction 1-1. Features • 27.0″ wide format LCD• Wide color gamut (Adobe RGB coverage: 97%)• Applicable to the resolution of 2560 × 1440.• IPS panel with 178˚ horizontal and vertical viewing angles• Frame synchronization mode supported (23.75 - 30.5Hz, 47.5 - 61...
Page 8 - Do not touch the built-in calibration sensor.
8 Chapter1Introduction Attention Be careful of the following points when using the built-in calibration sensor. Do not touch the built-in calibration sensor. Itmayreducethemeasurementaccuracyofthebuilt-incalibrationsensor,orresultininjuryorequipmentdamage. Attention • A high tempe...
Page 10 - Disk contents and software overview; Contents; To use ColorNavigator
10 Chapter1Introduction 1-3. EIZO LCD Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with this product. The following table shows the disk contents and the overview of the software programs. ● Disk contents and software overview The disk includes application software programs for adj...
Page 11 - Basic Adjustment menu operations; Displaying Adjustment Menu; Exiting the software
11 Chapter1Introduction 1-4. Basic Operations and Functions ● Basic Adjustment menu operations 1. Displaying Adjustment Menu 1. Press . The Adjustment menu appears. Currentmode Menutitle Setting Menu Item 2. Adjusting/Setting 1. Choose a menu to adjust/set with , and then press . 2. Choose an it...
Page 12 - Showing Button Guide
12 Chapter1Introduction ● Showing Button Guide When you press the front buttons (except the button), the button guide appears next to the button. ButtonGuide Controlbutton Note • The button guide will continue to appear while the Adjustment menu or Mode menu is showing.• The button guide is disp...
Page 13 - Functions; Main Menu
13 Chapter1Introduction ● Functions The following table shows the menus for adjustment and setting items of each menu. Main Menu Item Reference Color *1 Brightness “2-3.AdjustingColor”(page17) TemperatureGammaAdvanced Settings HueSaturationOutlineEnhancerClippingGainBlackLevel6Colors Color...
Page 15 - Chapter 2 Adjusting Screens; Resolution
15 Chapter2AdjustingScreens Chapter 2 Adjusting Screens 2-1. Compatible Resolutions The monitor supports the following resolutions. ● Digital Input (DVI-D, DisplayPort) Resolution Applicable Signals Vertical scan frequency Dot clock DVI-D DisplayPort 640×480 VGA 60Hz 242.0MHz (Max.) √ √ 720×...
Page 16 - Windows 7; Mac OS X
16 Chapter2AdjustingScreens 2-2. Setting Resolution When you connect the monitor to the PC and find that the resolution is improper, or when you want to change the resolution, follow the procedure below. ● Windows 7 1. Right-click the mouse anywhere on the desktop except for icons.2. From the dis...
Page 17 - Procedure
17 Chapter2AdjustingScreens 2-3. Adjusting Color ● To select the display mode (color mode) This function allows easy selection of a desired mode according to monitor application. Display Modes Mode Purpose 1-Custom Availableforthecolorsettingsaccordingtoyourpreference. 2-Adobe ® RGB Suita...
Page 18 - To perform advanced adjustments; Adjustable settings in each mode; Function
18 Chapter2AdjustingScreens ● To perform advanced adjustments “Color” of the Adjustment menu allows you to configure and save a separate set of color settings for each mode. Attention • It takes about 7 minutes (under our measurement conditions) for the performance of electrical parts to stabiliz...
Page 19 - Adjusting Brightness; Adjusting the temperature; Setting Range
19 Chapter2AdjustingScreens ● Adjusting Brightness The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD back panel). Setting Range 75cd/m 2 to 350 cd/m 2 Procedure 1. Press or . The Brightness menu appears. 2. Use or for adjustment.3. Press to e...
Page 20 - Adjusting Gamma; Adjusting Hue
20 Chapter2AdjustingScreens ● Adjusting Gamma Gamma can be adjusted. The brightness of the monitor varies depending on the input signal, however, the variation rate is not proportional to the input signal. To keep the balance between the input signal and the brightness of the monitor is called as...
Page 21 - Adjusting Saturation; To enhance outline of image
21 Chapter2AdjustingScreens ● Adjusting Saturation This function allows you to adjust color saturation. Setting Range -100 to 100 Procedure 1. Choose “Color” from the Adjustment menu, and press . 2. Choose “Advanced Settings” from “Color”, and press . 3. Choose “Saturation”, and press . 4. Use or...
Page 22 - To set clipping
22 Chapter2AdjustingScreens ● To set clipping This function allows you to display the monitor with the colors based on the standard values of the defined color gamut (such as sRGB). The method of displaying the defined color gamut outside the normal gamut of the monitor can be set. Procedure 1. C...
Page 23 - Adjusting Gain; Adjusting the brightness and color of black “Black Level”; Adjustable Range
23 Chapter2AdjustingScreens ● Adjusting Gain The brightness of each color component red, green, and blue is called Gain. You can change the hue of “white” by adjusting gain. Setting Range 0% to 100% Procedure 1. Choose “Color” from the Adjustment menu, and press . 2. Choose “Advanced Settings” fr...
Page 24 - Adjusting 6 Colors
24 Chapter2AdjustingScreens ● Adjusting 6 Colors The hue and saturation can be adjusted for each of six colors: Magenta, Red, Yellow, Green, Cyan, and Blue. Adjustable Range -100 to 100 Procedure 1. Choose “Color” from the Adjustment menu, and press . 2. Choose “Advanced Settings” from “Color”, a...
Page 25 - Settings
25 Chapter2AdjustingScreens 2-5. Selecting Screen Size The image with the resolution other than the recommended resolution is displayed in full screen automatically. You can change the screen size by using the “Screen Size” function from “Screen”. ● DVI, DisplayPort (PC signal) input Settings Fun...
Page 27 - -6. Configuring Moving Image Performance
27 Chapter2AdjustingScreens 2-6. Configuring Moving Image Performance This function reduces visible afterimages that appear in fast moving images. If noise or afterimage is adversely noticeable, set the “Overdrive” setting to “Off ”.Default setting: On Procedure 1. Choose “Screen” from the Adjust...
Page 28 - Reducing noise; Selecting how to display interlace signal
28 Chapter2AdjustingScreens 2-8. Setting HDMI ● Reducing noise The small noises that occur in dark images are reduced. Use this function to reduce noise and roughness in images. Procedure 1. Choose “Screen” from the Adjustment menu, and press . 2. Choose “HDMI Settings” from “Screen”, and press ....
Page 29 - Enabling Pseudo Interlace; Setting Safe Area
29 Chapter2AdjustingScreens Enabling Pseudo Interlace The input interlace signal is displayed as it is without conversion, enabling images with a CRT-like texture to be displayed. Procedure 1. Choose “Screen” from the Adjustment menu, and press . 2. Choose “HDMI Settings” from “Screen”, and press...
Page 30 - Setting safe area size; Setting safe area frame
30 Chapter2AdjustingScreens Setting safe area size The size of the safe area can be set. Adjustable Range 80% to 99% Procedure 1. Choose “Screen” from the Adjustment menu, and press . 2. Choose “HDMI Settings” from “Screen”, and press . 3. Choose “Safe Area Size”, and press . 4. The size of the s...
Page 31 - Chapter 3 Setting Monitor; Selectable languages
31 Chapter3SettingMonitor Chapter 3 Setting Monitor 3-1. Enabling/Disabling Mode Selection This function selects / deselects modes that should be skipped. Please use this function if you would like to prevent a mode from being used. Procedure 1. Choose “Tools” from the Adjustment menu, and press ...
Page 32 - -4. Changing Adjustment Menu Display Position
32 Chapter3SettingMonitor 3-4. Changing Adjustment Menu Display Position You can change the display position of the Adjustment menu. Procedure 1. Choose “Menu Settings” from the Adjustment menu, and press . 2. Choose “Menu Position” from “Menu Settings”, and press . 3. Choose the position with or...
Page 34 - Setting; To reset the color adjustments
34 Chapter3SettingMonitor 3-9. Changing DUE (Digital Uniformity Equalizer) Setting The DUE setting can be changed. Settings Function Brightness Makesthebrightnessandcolorofthewholescreenuniformwithoutchangingthemaximumbrightnessandcontrastratio.Thebrightnessofahighgradation...
Page 35 - To reset all adjustments to the default settings
35 Chapter3SettingMonitor ● To reset all adjustments to the default settings This function resets all adjustments to the default settings (except the “Optional Settings” menu and “USB Selection”. Procedure 1. Choose “Tools” from the Adjustment menu, and press . 2. Choose “All Reset” from “Tools”,...
Page 36 - Chapter 4 SelfCalibration; Setting monitor date and time
36 Chapter4SelfCalibration Chapter 4 SelfCalibration This product is equipped with a built-in calibration sensor. The conditions that have been adjusted using ColorNavigator and the measurement device can be maintained.As the adjustment targets or interval times for SelfCalibration are set in adva...
Page 37 - Setting calibration schedule
37 Chapter4SelfCalibration ● Setting calibration schedule Set the calibration schedule for SelfCalibration. Attention • Clock adjustment is necessary for SelfCalibration to operate. Procedure 1. Choose “SelfCalibration” from the Adjustment menu, and press . 2. Choose “Settings” from “SelfCalibrati...
Page 38 - Set the mode for which SelfCalibration is executed.
38 Chapter4SelfCalibration ● Set the mode for which SelfCalibration is executed. Set the time at which SelfCalibration is executed. Procedure 1. Choose “SelfCalibration” from the Adjustment menu, and press . 2. Choose “Settings” from “SelfCalibration”, and press . 3. Choose “Mode Selection” from “...
Page 39 - Setting Adjustment Target
39 Chapter4SelfCalibration ● Setting Adjustment Target Set the calibration targets for SelfCalibration. Procedure 1. Choose “SelfCalibration” from the Adjustment menu, and press . 2. Choose “Settings” from “SelfCalibration”, and press . 3. Choose “Target” from “Settings”, and press . 4. Use or to ...
Page 41 - Chapter 5 Power Saving Functions; DVI Signal Input; DisplayPort Signal Input; HDMI Signal Input
41 Chapter5PowerSavingFunctions Chapter 5 Power Saving Functions 5-1. Setting Power Save This function allows you to set the monitor into the power saving mode according to the PC status. When the monitor has shifted to the power saving mode, the images on the screen are not displayed. Attention...
Page 42 - -2. Sets the brightness of the indicator
42 Chapter5PowerSavingFunctions 5-2. Sets the brightness of the indicator The brightness of the power indicator (blue) and the function indicator below the operation keys when the screen is displayed can be set. (The both indicators are set to light up when the power is switched on, and are set ...
Page 43 - Chapter 6 Troubleshooting; Problem
43 Chapter6Troubleshooting Chapter 6 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local EIZO representative. 6-1. No picture Problem Possible cause and remedy 1. No picture • Powerindicatordoesnotlight. • Checkwhetherthepowercordisconne...
Page 46 - problems; Error Code Table; Error Code
46 Chapter6Troubleshooting 6-4. Built-in calibration sensor and SelfCalibration problems Problem Possible cause and remedy 1. The built-in calibration sensor does not come out/stays out. • Turnoffthemainpower,andthenturnitonagainafew minuteslater. 2. SelfCalibration cannot be execut...
Page 47 - Chapter 7 Reference
47 Chapter7Reference Chapter 7 Reference 7-1. Attaching the Optional Arm An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our web site for the corresponding optional arm (or optional stand). http://www.eizo.com Attention • When attaching an arm ...
Page 48 - -2. Connecting Multiple External Devices; Connection examples
48 Chapter7Reference 7-2. Connecting Multiple External Devices The product has multiple connections to external devices and allows you to switch to one of the connections for display. Connection examples DisplayPort connector HDMIconnector HDMIcable (Commercially availableproduct)* 1 Digital...
Page 49 - To switch among input signals; To set input signal selection “Input Selection”
49 Chapter7Reference ● To switch among input signals The input signal switches each time is pressed. When the signal is switched, the active input port name appears at the top right corner of the screen. ● To set input signal selection “Input Selection” Settings Function Auto Themonitorrecognize...
Page 50 - System Requirement
50 Chapter7Reference 7-3. Making Use of USB (Universal Serial Bus) This monitor has a USB hub. Connected to a PC compatible with USB, this monitor functions as a USB hub allowing connection to peripheral USB devices. ● System Requirement • A PC equipped with a USB port.• Windows 2000/XP/Vista/7 or...
Page 51 - Displaying signal information “Signal Info”; Displaying Monitor Information “Monitor Info”
51 Chapter7Reference 7-4. Showing Monitor Information ● Displaying signal information “Signal Info” This function displays the information about the current input signals displayed. Procedure 1. Choose “Tools” from the Adjustment menu, and press . 2. Choose “Signal Info” from “Tools”, and press . ...
Page 53 - Main Default Settings
53 Chapter7Reference Environmentalconditions Temperature Operating: 0˚Cto35˚C(32˚Fto95˚F) Storage/Transportation: -20˚Cto60˚C(-4˚Fto140˚F) Humidity Operating: 20%to80%R.H.(nocondensation) Storage/Transportation: 10%to90%R.H.(nocondensation) Airpressure Operating: 700hPato1...
Page 54 - Outside Dimensions; Accessories
54 Chapter7Reference Outside Dimensions Unit:mm(inch) 90°~ 381 (15.0) 296 (1 1.7) 255 (10.0) 281.5 (11.1) 383.5 (15.1) 15.5 (0.61) 100 (3.9) 100 (3.9) 256.5 (10.1) 279 (11.0) 215 (8.5) 604 (23.8) 704 (27.7) 58 (2.28) 402 (15.8) 37.6 (1.48) 576.5 (22.7) 646 (25.4) 599 (23.6) 23.5 (0.93) 23.5 (0.9...
Page 55 - Chapter 8 Glossary; Adobe RGB
55 Chapter8Glossary Chapter 8 Glossary Adobe RGB This is a definition of the practical RGB color space proposed by Adobe Systems in 1998. The color reproduction range (color gamut) is broader than sRGB, and is highly adaptable to such fields as printing etc. Clock The analog signal input monitor n...
Page 56 - Gain
56 Chapter8Glossary Gain This is used to adjust each color parameter for red, green and blue. An LCD monitor displays the color by the light passing through the panel color filter. Red, green and blue are the three primary colors. All the colors on the screen are displayed by combining these three...
Page 57 - Temperature
57 Chapter8Glossary sRGB (Standard RGB) International standard for color reproduction and color space among peripheral devices (such as monitors, printers, digital cameras, scanners). As a form of simple color matching for the Internet, colors can be displayed using tones close to those of the tra...
Page 58 - Appendix; Trademark
58 Appendix Appendix Trademark The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries.The DisplayPort Compliance Logo and VESA are registered trademarks of the Video Elect...
Page 59 - FCC Declaration of Conformity; We, the Responsible Party; Canadian Notice
59 Appendix FCC Declaration of Conformity For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZONANAOTECHNOLOGIESINC.5710WarlandDrive,Cypress,CA90630Phone:(562)431-5011 declare that the product Tradename:EIZOModel:ColorEdgeCG2...
Page 60 - Hinweis zur Ergonomie :
60 Appendix Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der Auswahl des S...
Page 61 - LIMITED WARRANTY
61 Appendix LIMITED WARRANTY LIMITED WARRANTY EIZO NANAO CORPORATION (hereinafter referred to as “ EIZO ”) and distributors authorized by EIZO (hereinafter referredtoasthe“ Distributors ”)warrant,subjecttoandinaccordancewiththetermsofthislimitedwarranty(hereinafter r...
Page 62 - BEGRENZTE GARANTIE
62 Appendix BEGRENZTE GARANTIE EIZONANAOCORPORATION(imWeiterenals„ EIZO “bezeichnet)unddieVertragsimporteurevonEIZO(imWeiteren als „ Vertrieb(e) “ bezeichnet) garantieren dem ursprünglichen Käufer (im Weiteren als „ Erstkäufer “ bezeichnet), der das in diesem Dokument...
Page 63 - GARANTIE LIMITÉE
63 Appendix GARANTIE LIMITÉE EIZONANAOCORPORATION(ci-aprèsdénommé« EIZO »)etlesdistributeursautorisésparEIZO(ci-aprèsdénommés « Distributeurs »),sousréserveetconformémentauxtermesdecettegarantielimitée(ci-aprèsdénommée« Garantie »),garantissentàl’acheteurinitial(ci...
Page 64 - GARANTÍA LIMITADA
64 Appendix GARANTÍA LIMITADA EIZO NANAO CORPORATION (en lo sucesivo “ EIZO ”) y sus distribuidores autorizados (en lo sucesivo los “ Distribuidores ”),conarregloydeconformidadconlostérminosdeestagarantíalimitada(enlosucesivola“ Garantía ”), garantizanalcompradoro...
Page 65 - GARANZIA LIMITATA
65 Appendix GARANZIA LIMITATA EIZONANAOCORPORATION(acuisifaràriferimentodaquiinpoicon“ EIZO ”)ediDistributoriautorizzatidaEIZO(a cuisifaràriferimentodaquiinpoicon“ Distributori ”)garantiscono,secondoiterminidiquestagaranzialimitata(acuisi faràriferimentoda...
Page 66 - BEGRÄNSAD GARANTI
66 Appendix BEGRÄNSAD GARANTI EIZO NANAO CORPORATION (nedan kallat “ EIZO ”) och EIZOs auktoriserade distributörer (nedan kallade “ Distributörer ”) garanterar i enlighet med villkoren i denna begränsade garanti (nedan kallad “ Garantin ”) den ursprungligeköparen(nedanka...
Page 67 - ΠΕΡΙΟΡΙΣΜΕΝΗ ΕΓΓΥΗΣΗ
67 Appendix ΠΕΡΙΟΡΙΣΜΕΝΗ ΕΓΓΥΗΣΗ Η EIZO NANAO CORPORATION (στο εξής « EIZO ») και οι διανομείς που εξουσιοδοτεί η EIZO (στο εξής « Διανομείς ») παρέχουν εγγύηση, υποκείμενη και σύμφωνα με τους όρους της παρούσας περιορισμένης εγγύησης (στο εξής « Εγγύηση »),στοναρχικό...
Page 68 - ОГРАНИЧЕННАЯ ГАРАНТИЯ
68 Appendix ОГРАНИЧЕННАЯ ГАРАНТИЯ EIZO NANAO CORPORATION (называемая в дальнейшем “ EIZO ”) и авторизированные EIZO дистрибуторы (называемые в дальнейшем “ Дистрибуторы ”) гарантируют, в соответствии с условиями и пунктами этой ограниченной гарантии (называемой в дальнейше...
Page 69 - 有限责任保证书
69 Appendix 有限责任保证书 EIZONANAO 有限公司 ( 以下简称 “ EIZO ”) 和 EIZO 授权的经销商 ( 以下简称 “ 经销商 ”), 接受并依照本有限责任保证书 ( 以下简称 “ 保证书 ”) 之条款 , 向从 EIZO 和经销商购买本文中所规定产品 ( 以下简称 “ 产品 ”) 的原买方 ( 以下称 “ 原买方 ”) 提供保证 : 在保证期内 ( 规定如下 ), 如果原买方发现按本产品所附使用说明书 ( 以下简称 “ 用户手册 ”) 所述方式正常使 用本产品过程中 , 本产品出现故障或损坏 , EIZO 和经销商根据其独自的判断免费修理或更换该产品 。 本保...
Page 70 - Recycling Information
70 Appendix Recycling Information Recycling Information This product, when disposed of, is supposed to be collected and recycled according to your country’s legislationtoreduceenvironmentalburden.Whenyoudisposeofthisproduct,pleasecontactadistributoror anaffiliatein...
Page 73 - Информация относно рециклиране; Informaţie referitoare la reciclare; Geri Dönüşüm Bilgisi
73 Appendix Информация относно рециклиране Приизхвърлянетонатозипродуктсепредлагасъбиранетоирециклиранетомусъобразнозаконитена вашатастраназадасенамализамърсяванетонаоколнатасреда.Когатоискатедасеосвободитеот тозипродукт,молясвържетесестърговскиямупредставители...
Page 74 - China Measures for RoHS Compliance in ChinaRoHS; 关于电子信息产品污染控制标识
74 Appendix China Measures for RoHS Compliance in ChinaRoHS 关于电子信息产品污染控制标识 本标识根据「电子信息产品污染控制管理办法」 ,适用于在中华人民共和国销售的电子信息产品。标识中央的 数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项,在自制造日起算的年限内,不会产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。 • 有毒有害物质或元素的名称及含量 部件名称 有毒有害物质或元素 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr(VI) ) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 印刷电路板...