Page 3 - Notice for this monitor; Cleaning
Notice for this monitor This product is suited to creating documents, viewing multimedia content, and other general purposes. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specifi...
Page 4 - Attention; the cabinet or LCD panel.; NOTE; dry cloth for better finishing.; To use the monitor comfortably; environmental conditions.
Cleaning Attention • Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may damage the cabinet or LCD panel. NOTE • Optional ScreenCleaner is recommended for cleaning the panel surface. [LCD Panel] • Clean the LCD panel with a soft cloth such as ...
Page 5 - -1 Displaying Monitor Infomation; CONTENTS
CONTENTS ● To adjust brightness of non-display area [Border Intensity] .............................................. 23 -11 Setting Adjustment Menu Display ................ ● To update menu settings [Menu Size/ Menu Position/Menu Off Timer/Translucent] .... 24 -1 Setting Orientation ..................
Page 6 - Hinweise zur Auswahl des richtigen Schwenkarms
6 CONTENTS Chapter Reference ......................................... -1 Attaching an Arm ........................................... - Folding the EZ-UP stand ............................... 5-3 Specifications ................................................ 6 - Glossary .............................
Page 7 - Chapter 1 Features and Overview; • Applicable to DVI long cable
7 Chapter 1 Features and Overview Chapter 1 Features and Overview Thank you very much for choosing an EIZO color LCD monitor. 1-1 Features • 22” wide format LCD Applicable to WSXGA+ (1680×1050) (S2232W)/ 22” wide format LCD Applicable to WUXGA (1920×1200) (S2242W)/ 24” wide format LCD Applicable to ...
Page 8 - - Controls and Functions; Ex. Height adjustable stand
8 Chapter 1 Features and Overview 1- Controls and Functions Ex. Height adjustable stand 1 2 3 4 5 6 7 9 8 11 19 12 14 13 15 10 17 20 21 18 16 Adjustment menu ( * ScreenManager ® ) 1 Sensor Detects ambient brightness. Auto EcoView function ( page 21 ). Auto EcoView button Allows you to switch the Aut...
Page 9 - The monitor supports the following resolutions.; Analog Input
9 Chapter 1 Features and Overview 1- Compatible Resolutions/Frequencies The monitor supports the following resolutions. Analog Input Resolution Frequency Mode SW SW/SW Dot Clock ~10MHz Dot Clock ~0.MHz 640 × 480 ~75 Hz VGA, VESA √ √ 720 × 400 70 Hz VGA TEXT √ √ 800 × 600 ~75 Hz VESA √ √ 1024 × 768 ~...
Page 10 - Screen Adjustment; Resuming the default settings; Color Adjustment
10 Chapter 1 Features and Overview 1- Functions and Basic Operation To adjust the screen and color 1 Screen Adjustment (Automatic Adjustment) ● To adjust flickering and position [Screen] ……………………………… see page 14 ● To adjust color gradation automatically [Range] ……………………………… see page 16 Page 1 Analog...
Page 11 - Information; To make useful settings/adjustments; Other Settings
11 Chapter 1 Features and Overview Information ● Displaying Monitor Infomation [Information] To make useful settings/adjustments Power-save Settings ● Setting On/Off for Power Saving mode [Power Save] ………………………see page 21 ● Turning off the monitor automatically [Off Timer] …………………………see page 22 ● Di...
Page 12 - Basic operation of Adjustment menu; [Displaying Adjustment menu and selecting function]
1 Chapter 1 Features and Overview Basic operation of Adjustment menu [Displaying Adjustment menu and selecting function] (1) Press . The Main menu appears. (2) Select a function with / / / , and press . The Sub menu appears. (3) Select a function with / / / , and press . The adjustment/setting menu ...
Page 13 - Disk contents and software overview; Item; To use ScreenManager Pro for LCD; Chapter Settings and Adjustments
1 Chapter 2 Settings and Adjustments -1 Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents andthe overview of the software programs. ● Disk contents and software overview The disk includes software programs for adjustment, and U...
Page 14 - Digital Input; The auto adjust function works in the following cases:; or; above, perform the adjustments according to the procedures on; ■ For Windows PC
1 Chapter 2 Settings and Adjustments - Screen Adjustment Digital Input When digital signals are input, images are displayed correctly based on the preset data of the monitor, but if characters and/or lines appear blurred, go to step 6 “To modify blurred characters/lines [Smoothing]”. When performing...
Page 15 - Perform the auto adjustment again with the analog screen; (1) Display Pattern 1 in full screen on the monitor using the “Screen; above, perform the adjustments according to the procedures on; To remove flickering or blurring [Phase]
1 Chapter 2 Settings and Adjustments 3 Perform the auto adjustment again with the analog screen adjustment pattern displayed. ● To adjust flickering, screen position, and screen size automatically [Screen] (1) Display Pattern 1 in full screen on the monitor using the “Screen Adjustment Utility” or t...
Page 16 - to display the image; Adjust the color gradation.; Adjustment Utility” or the screen adjustment pattern files.; Modify blurred characters or lines.; When a image is displayed with a resolution other than the
16 Chapter 2 Settings and Adjustments ● To correct screen position [Position] (1) Choose <Position> from the <Screen> menu, and press . The <Position> menu appears. (2) Adjust the position with / / / to display the image properly in the display area of the monitor, and press The ad...
Page 17 - To select the display mode (FineContrast mode); Mode; (2) One of five modes is displayed in turn each time; Custom
17 Chapter 2 Settings and Adjustments - Color Adjustment ● To select the display mode (FineContrast mode) FineContrast allows you to select the best display mode easily according to the monitor’s application. FineContrast mode Mode Purpose Custom Available to change all setting values. sRGB Suitable...
Page 18 - : Adjustment available −: Invalid for adjustment; Icon
18 Chapter 2 Settings and Adjustments ● To perform advanced adjustments Independent setting and saving of color adjustment are available for each FineContrast mode. ● Adjustment items in each mode According to the FineContrast mode selected, the adjustable function differs. √ : Adjustment available ...
Page 19 - To adjust the color temperature [Temperature]; To adjust the color saturation [Saturation]; (3) Adjust the saturation of the color with
19 Chapter 2 Settings and Adjustments ● To adjust the color temperature [Temperature] The color temperature can be adjusted. The color temperature is normally used to express the hue of “White” and/or “Black” by a numerical value. The value is expressed in degrees “K” (Kelvin).In the same way as the...
Page 20 - - Turning off the audio output at Power
0 Chapter 2 Settings and Adjustments ● To adjust the hue [Hue] This function allows you to adjust the hue. If you set the hue to a high value, the image turns greenish. If low, the image turns purplish. Adjustable range: -32 to 32 (1) Choose <Color> from the Adjustment menu, and press . (2) Ch...
Page 21 - -7 Setting On/Off for Power Saving mode; Analog input; This monitor complies with the VESA DPMS standard.; Digital input; This monitor complies with the DVI DMPM standard.
1 Chapter 2 Settings and Adjustments -6 Setting On/Off for the automatic brightness adjustment function [Auto EcoView] The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness automatically and comfortably by using the Auto EcoView function.(1)...
Page 22 - -8 Turning off the monitor automatically; -9 Displaying the level of power saving by
Chapter 2 Settings and Adjustments -8 Turning off the monitor automatically [Off Timer] This function allows you to switch the setting to turn off the monitor automatically after a specified time has passed at the power saving mode. Adjustable range: Disable, Enable (0, 1, 2, 3, 5, 10, 15, 20, 25, 3...
Page 23 - -10 Screen Size Selection; Menu
Chapter 2 Settings and Adjustments -10 Screen Size Selection ● To change screen size [Screen Size] The image with the resolution other than the recommended resolution is displayed in full screen automatically. You can change the screen size by using <Screen Size> from <Others> menu. Menu...
Page 24 - -11 Setting Adjustment Menu Display; Menu Size; Menu Off Timer; with; Translucent; (4) Adjust the transparency for menu display with
Chapter 2 Settings and Adjustments -11 Setting Adjustment Menu Display ● To update menu settings [Menu Size/Menu Position/Menu Off Timer/Translucent] Menu Size Change the Adjustment menu size using the following procedure.(1) Choose <Others> from the Adjustment menu, and press . (2) Choose <...
Page 25 - -1 Setting Orientation; To set the orientation of the Adjustment menu [Orientation]; ress; press
Chapter 2 Settings and Adjustments -1 Setting Orientation ● To set the orientation of the Adjustment menu [Orientation] This function allows you to change the orientation of the Adjustment menuwhen using the monitor screen in vertical display position.(1) Choose <Others> from the Adjustment me...
Page 26 - communication; Selectable languages; to turn off the monitor.
6 Chapter 2 Settings and Adjustments -1 Enabling/Disabling DDC/CI communication This function allows you to enable/disable the DDC/CI communication.(1) Press to turn off the monitor. (2) Press holding down to turn on the monitor. The Enable/Disable setting is toggled by performing the operation in s...
Page 27 - To reset color adjustment values; To reset all adjustments to the factory default settings
7 Chapter 2 Settings and Adjustments -19 Resuming the Default Setting [Reset] There are two types of Reset. One is to reset the color adjustment only to the default settings, and the other is to reset all the settings to the default settings. ● To reset color adjustment values Only the adjustment va...
Page 28 - -1 Connecting Two PCs to the Monitor; Connection examples; To switch the input signal; The input signal switches each time; Chapter Connecting Cables
8 Chapter 3 Connecting Cables -1 Connecting Two PCs to the Monitor Two PCs can be connected to the monitor through the DVI-D and the D-Sub mini 15 pin connector on the back of the monitor. Connection examples D-Sub mini15-pin Connector DVI-D connector Signal cable (supplied FD-C39) Signal cable (sup...
Page 29 - To set input signal selection [Input Signal]; Priority setting; - Adjusting the DVI Input Level
9 Chapter 3 Connecting Cables ● To set input signal selection [Input Signal] The monitor recognizes the connector through which PC signals are input.When either PC is turned off or enters the power-saving mode, the monitor automatically displays signals of another PC. Priority setting Function Auto ...
Page 30 - - Connecting Peripheral USB Devices; Required System Environment; (1) A PC equipped with a USB port or another USB hub connected to; Connection Procedure (Setup of USB Function); (1) Connect the monitor first to a PC using the signal cable, and run
0 Chapter 3 Connecting Cables - Connecting Peripheral USB Devices This monitor has a hub compatible with USB. Connected to a PC compatiblewith USB or another USB hub, this monitor functions as a USB hub allowingconnection to peripheral USB devices. ● Required System Environment (1) A PC equipped wit...
Page 31 - Chapter Troubleshooting; Problems
1 Chapter 4 Troubleshooting Chapter Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. • No-picture problems → See No.1 - No.2.• Imaging problems (digital input) → See No.3 - No.8.• Imaging problems (analog input) → See No.3 - No.12.• Other p...
Page 32 - Whole screen is flickering or blurring.
Chapter 4 Troubleshooting Problems Possible cause and remedy . Afterimages appear. • Use a screen saver or off timer function for a long-time image display. • Afterimages are particular to LCD monitors. Avoid displaying the same image for a long time. 6. Green/red/blue/white dots or defective dots r...
Page 34 - Chapter Reference; Lay the LCD monitor on a soft cloth spread over on a stable
Chapter 5 Reference Chapter Reference -1 Attaching an Arm The stand can be removed and replaced with an arm (or another stand) to be attached to the monitor. Use an arm or stand of EIZO option. 1 Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down. ...
Page 35 - Remove the cable holder.; Fall the monitor screen backward with keeping slide-up the
Chapter 5 Reference - Folding the EZ-UP stand Perform the following procedures to fold the stand when re-packing a monitor with an EZ-UP stand. 1 Remove the cable holder. 2 Lower the monitor screen position until the hinge of the stand touches the stand base, and attach the lock metal fitting. Adjus...
Page 36 - SW
6 Chapter 5 Reference 5-3 Specifications SW LCD Panel 22.0-inch (560 mm) TFT color LCD with anti-glareViewing angle: Horizontal 178°, Vertical 178° (CR:10 or more) Dot Pitch 0.282 mm Horizontal Scan Frequency Analog: 31-82 kHzDigital: 31-65 kHz Vertical Scan Frequency Analog: 55-76 Hz (Non-interlace...
Page 41 - Outside Dimensions
1 Chapter 5 Reference Outside Dimensions SW/SW (Height adjustable stand) unit : mm (inch) 53.8 (2.12) 85 (3.35) 475.8(18.7) 17.6(0.69) 17.6(0.69) 511(20.1) 17.45 (0.69) 298.1(11.7) 333(13.1) 100(3.9) 100(3.9) 205.5(8.1) 205.5(8.1) 116.5(4.6) 116.5(4.6) 168(6.6) 35 ° 35 ° 240.5(9.5) 325(12.8) 528(20....
Page 43 - Connector Pin Assignment; Signal
Chapter 5 Reference SW (EZ-UP stand) unit : mm (inch) 27.7(1.09) 25° 172° 172° 90° 129.3(5.1) 532(20.9) 56.3(2.22) 85(3.35) SWIVEL Ø272(10.7) 326(12.8) 367(14.4) 520.4(20.5) 566(22.3) 67(2.64) 533.5(21) 22.8(0.9) 22.8(0.9) 20.5(0.81) 20.5(0.81) 633(24.9) PIVOT 279.9(11) 166.5(6.6) 350(13.8) 153.1(6)...
Page 44 - • USB port; Remarks; Accessories List
Chapter 5 Reference • D-Sub mini 15-pin connector Pin No. Signal Pin No. Signal Pin No. Signal 1 Red video 6 Red video ground 11 NC* 2 Green video 7 Green video ground 12 Data (SDA) 3 Blue video 8 Blue video ground 13 H. Sync 4 NC* 9 NC* 14 V. Sync 5 Ground 10 Ground 15 Clock (SCL) (NC*: No Connecti...
Page 46 - Resolution; A signal transmission system for digital interface.
6 Chapter 5 Reference Resolution The LCD panel consists of numerous pixels of specified size, which are illuminated to form images. This monitor consists of 1920 horizontal pixels and 1200 vertical pixels. At a resolution of 1920 x 1200, all pixels are illuminated as a full screen (1:1). sRGB (Stand...
Page 49 - We, the Responsible Party; Canadian Notice; FCC Declaration of Conformity
9 For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC.5710 Warland Drive, Cypress, CA 90630Phone: (562) 431-5011 declare that the product Trade name: EIZOModel: FlexScan S2232W/S2242W/S2432W is in conformity with Part...
Page 50 - Hinweis zur Ergonomie :
0 Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der Auswahl des Schwenkarms...
