Page 2 - FCC Declaration of Conformity; We, the Responsible Party; Note; Canadian Notice
For U.S.A, Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product Trade name: EIZO Model: FlexScan L761T-C is in conformity with Part 15 of the FCC...
Page 3 - User’s Manual; Touch Panel Color LCD Monitor
User’s Manual Touch Panel Color LCD Monitor It shall be assured that the final system is in compliance to IEC60601-1-1 requirements.
Page 4 - English; SAFETY SYMBOLS; WARNING
English 2 SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTIO...
Page 5 - TABLE OF CONTENTS
English TABLE OF CONTENTS 3 TABLE OF CONTENTS PRECAUTIONS ................................................................................... 4 1. INTRODUCTION ..................................................................................... 9 1-1. Features .........................................
Page 6 - PRECAUTIONS; IMPORTANT; Symbol
English 4 PRECAUTIONS PRECAUTIONS IMPORTANT • This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. • To ensure personal safety and proper maintenance, pl...
Page 7 - Do not open the cabinet or modify the unit.; OK; Use the unit in an appropriate location.
English PRECAUTIONS 5 WARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer for advice. Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage....
Page 8 - To disconnect the power cord, grasp the plug firmly and pull.; The equipment must be connected to a grounded main outlet.; Use the correct voltage.; Never touch the plug and power cord if it begins to thunder.
English 6 PRECAUTIONS WARNING To avoid danger of suffocation, keep the plastic packing bags away from babies and children. Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may result in fi...
Page 10 - Notice for this monitor
English 8 PRECAUTIONS Notice for this monitor This product is suited to creating documents, viewing multimedia content, and other general purposes. In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. ...
Page 12 - Front
English 10 1. INTRODUCTION 1-3. Controls & Connectors Front ENTER AUTO SIGNAL 1 - 2 (3) (4) (5) (2) (6) (7) (1) (8) MODE (1)ScreenManager ® Monitor Adjustment menu (p.16) (2) SIGNAL1-2 Input Signal Selection Button Switch the input signals when connecting 2 PCs. (p.15) (3) MODE Mode Button Show ...
Page 13 - Rear
English 1. INTRODUCTION 11 Rear (14) (15) (13) (9) (10) (11)(12) (9) Power Connector Connect the power cord. (10) DVI-D Connector (SIGNAL1) Connect the optional digital cable. (11) D-Sub mini 15 pin Connector (SIGNAL2) Connect the enclosed analog cable (MD-C87) (12) USB port (Up) Connect the USB cab...
Page 14 - Analog Input
English 12 2. CABLE CONNECTION 2. CABLE CONNECTION 2-1. Before connecting Before connecting your monitor to the PC, change the display screen settings (resolution (p.35) and frequency) in accordance with the charts below. NOTE • The lower display modes like 640x 480, automatically enlarge to the max...
Page 15 - NOTE
English 2. CABLE CONNECTION 13 2-2. Connecting the signal cable NOTE • Be sure that the power switches of both the PC and the monitor are OFF. 1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC. After connecting, s...
Page 17 - Selecting the active input
English 2. CABLE CONNECTION 15 2-3. Touch Operation Point and touch with one finger only. NOTE • Do not touch the screen while turning on the PC and the monitor. Touch the screen five seconds later after appearing the image. • Touch the screen five seconds later after connecting the USB cable. • For...
Page 18 - Entering the ScreenManager; Exiting the ScreenManager
English 16 3. ScreenManager 3. ScreenManager 3-1. How to use the ScreenManager ENTER AUTO SIGNAL 1 - 2 MODE 1. Entering the ScreenManager Press the Enter Button once to display the main menu of the ScreenManager. 2. Making Adjustments and Settings (1) Select the desired sub menu icon using the Contr...
Page 19 - Main menu
English 3. ScreenManager 17 3-2. Adjustments and Settings The following table shows all the ScreenManager’s adjustment and setting menus. “*” indicates adjustments of analog input only. Main menu Sub menu Reference Clock * Phase * Position * Range Adjustment * Screen Smoothing 4-1. Screen Adjustment...
Page 20 - Adjustment Lock; PC
English 18 3. ScreenManager 3-3. Useful Functions Adjustment Lock Use the “Adjustment Lock” function to prevent any accidental changes. Locked function • Auto Adjustment Button adjustments and settings in the ScreenManager. Unlocked function • Adjustment of brightness by the Control Buttons. • Input...
Page 21 - EIZO Logo display; Connecting two PCs to the monitor
English 3. ScreenManager 19 EIZO Logo display Enables to display the EIZO logo for a while when switching on the monitor (Default is no logo). If you desire to display or undisplay this logo, use this function. [To display] (1) Switch off the monitor’s power by the Power switch on the control panel....
Page 22 - Adjustment Procedure; Press the Auto Adjustment Button on the control panel.
English 20 4. ADJUSTMENT 4. ADJUSTMENT The monitor displays the digital input image correctly based on its pre-setting data. Adjust the brightness (p.23). 4-1. Screen Adjustment Screen adjustments for the LCD monitor should be used in suppressing screen flickering and also for adjusting the screen t...
Page 24 - To adjust the output signal range (Dynamic Range) of the signal.
English 22 4. ADJUSTMENT (3) The screen position is incorrect. → Use the <Position> adjustment. The correct displayed position of the monitor is decided because the number and the position of the pixels are fixed. The “Position” adjustment moves the image to the correct position. Select <Po...
Page 25 - Adjustment Contents
English 4. ADJUSTMENT 23 4-2. Color Adjustment In the analog input, perform the “Range Adjustment” (p.22) before making the color adjustments. The <Color> menu in the ScreenManager enables to change the color of the screen. By using the <Color Mode>, the adjustment mode can be selected f...
Page 27 - ATTACHING A STAND; Setup Procedure; Lay the LCD monitor down. Do not scratch the panel.
English 5. ATTACHING A STAND 25 5. ATTACHING A STAND The LCD monitor can be used with other stand by removing the tilt stand and attaching the stand to the LCD monitor. NOTE • When attaching an arm or stand, follow the instructions of their user’s manual. • When using another manufacturer’s arm or s...
Page 28 - Problems
English 26 6. TROUBLESHOOTING 6. TROUBLESHOOTING If a problem persists even after applying the suggested remedies, contact an EIZO dealer. The latest FAQ information is supplied on EIZO homepage (http://www.eizo.com/). • No Picture Problems Problems Points to check with possible solutions 1. No pict...
Page 32 - Cabinet
English 30 7. CLEANING 7. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. NOTE • Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, disinfectant, and abrasive cleaner, which may damage the cabinet or panel. • ...
Page 34 - Default settings
English 32 8. SPECIFICATIONS Classification of Equipment Type of protection against electric shock: Class I EMC class: EN60601-1-2:2001+A1:2006 Group1 Class B Classification of medical device (MDD 93/42/EEC): Class I Default settings Brightness 100% Smoothing 3 Temperature Off (normal white: approx....
Page 35 - Pin Assignment
English 8. SPECIFICATIONS 33 Pin Assignment D-Sub mini 15 pin connector Pin No. Signal Pin No. Signal Pin No. Signal 1 Red video 6 Red video ground 11 Ground 2 Green video 7 Green video ground 12 Data (SDA) 3 Blue video 8 Blue video ground 13 H. Sync 4 Ground 9 NC* 14 V. Sync 5 NC* 10 Ground 15 Cloc...
Page 36 - Clock
English 34 9. GLOSSARY 9. GLOSSARY Clock With the analog input signal display, the analog signal is converted to a digital signal by the LCD circuitry. To convert the signal correctly, the LCD monitor needs to produce the same number clock pulse as the dot clock of the graphics system. When the cloc...
Page 37 - Range Adjustment
English 9. GLOSSARY 35 Range Adjustment The Range Adjustment controls the level of output signal range to display the whole color gradation. Resolution The LCD panel consists of numerous pixels of specified size, which are illuminated to form images. The display panel of this monitor consists of 128...
Page 39 - EMC Information; CAUTION; Emission test
EMC Information Essential performance of FlexScan L761T-C is to display images and operate functions normally. CAUTION The FlexScan L761T-C requires special precautions regarding EMC and need to be installed, put into service and used according to the following information.Do not use any cables othe...
Page 42 - equipment and the FlexScan L761T-C
Recommended separation distances between portable and mobile RF communications equipment and the FlexScan L761T-C The FlexScan L761T-C is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the FlexScan L761T-C can help pre...
