Page 2 - Canadian Notice
For U.S.A, Canada, etc. (rated 100-120 Vac) Only This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operat...
Page 3 - Cover
Page 4 - SAFETY SYMBOLS
2 Using the special functions, such as screen size change (ex. changing the horizontal and vertical ratio of images input) for commercial purposes or for the purpose of showing in public may violate copyright laws. <For USA-California Only> CR Coin Lithium Battery contains Perchlorate Material...
Page 5 - PRECAUTIONS; IMPORTANT
3 PRECAUTIONS IMPORTANT • To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below). [Location of Caution Statement] WARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises...
Page 6 - WARNING
4 WARNING Use the unit in an appropriate location. Not doing so may result in fire, electric shock, or equipment damage.• Do not place outdoors.• Do not place in a transportation system (ship, aircraft, train, automobile, etc.) where it may be affected by strong vibration or shock. • Do not place in...
Page 8 - CAUTION
6 CAUTION Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous. It may result in injury. When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward befo...
Page 9 - Notice for this monitor
7 Notice for this monitor This product is suited for displaying surveillance camera images. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. This pro...
Page 10 - Cleaning; Panel; To use the monitor comfortably
8 Cleaning ATTENTION • Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may damage the cabinet or panel. NOTE • Optional ScreenCleaner is recommended for cleaning the panel surface. ● Panel • Clean the panel with a soft cloth such as cotton clo...
Page 11 - CONTENTS
9 CONTENTS CONTENTS Cover ............................................................. 1 PRECAUTIONS ................................................. 3 Notice for this monitor ............................................. 7 CONTENTS ............................................................. 9Ch...
Page 12 - Chapter 1 Introduction
10 Chapter 1 Introduction Chapter 1 Introduction Thank you very much for choosing an EIZO color LCD monitor. 1-1. Features • 19-inch screen• SXGA (1280 × 1024) display compliant• Analog signal support PC signal: D-Sub mini 15-pin connector × 1- Horizontal scan frequency 24.8 kHz - 74.8 kHz- Vertical...
Page 13 - Monitor
11 Chapter 1 Introduction 1-3. Controls and Functions Monitor 14 15 7 3 6 2 4 9 10 12 11 5 1 8 13 1 Remote control detector Receives the signal from the remote control.2 button Displays the volume adjustment menu to volume up or down. 3 button • Displays/Exits the OSD menu.• Pressing the button whil...
Page 14 - Remote Control; Before Using Remote Control; How to install batteries; Insert a battery with the positive side up.; Receivable Range of Remote Control
12 Chapter 1 Introduction Remote Control 1 2 3 8 4 6 5 7 1 POWER Turns the power on or off. 2 INPUT SELECT PC Switches to PC input. VIDEO Switches to video input. 3 VOLUME Displays the volume adjustment menu to volume up or down. 4 MENU • Displays/Exits the OSD menu.• Pressing the button while the O...
Page 15 - Chapter 2 Connecting Cables; Connects to external equipment compatible with the monitor.; When used as a PC monitor
13 Chapter 2 Connecting Cables Chapter 2 Connecting Cables 2-1. Connection Procedures 1 Connects to external equipment compatible with the monitor. • When used as a PC monitor .................................................... page 13• When using video equipment ......................................
Page 16 - When using video equipment
14 Chapter 2 Connecting Cables (1) Connect the monitor to the PC with a signal cable that matches the connectors. After connecting the cable connectors, tighten the screws of the connectors to secure the coupling. Monitor Signal cable FD-C16 (optional) D-Sub mini 15-pin connector D-Sub mini 15-pin c...
Page 17 - Plug the power cord of the monitor into a power outlet.; -2. Adjusting the Screen Height and Angle
15 Chapter 2 Connecting Cables 2 Plug the power cord of the monitor into a power outlet. Plug the power cord into a power outlet and the Power connector on the monitor. ATTENTION • For the maximum power saving, it is recommended that the Power button be turned off. Unplugging the power cord complete...
Page 18 - Chapter 3 Settings and Adjustments; Basic operation of Quick-OSD menu; Displaying Quick-OSD Menu
16 Chapter 3 Settings and Adjustments Chapter 3 Settings and Adjustments Setting and adjustment of the monitor can be performed using the Quick-OSD menu or OSD menu. The Quick-OSD menu enables easy operation of frequently used functions in the OSD menu. 3-1. Using Quick-OSD menu Basic operation of Q...
Page 19 - Functions
17 Chapter 3 Settings and Adjustments Functions The adjustable settings in the Quick-OSD menu are shown below. The availability of items depends on the input signal. √ : Configurable ― : Not configurable Setting / adjustable item PC Video Setting / adjustable content Brightness 0 to 100 √ √ Adjusts ...
Page 20 - Basic operation of OSD menu; Displaying OSD menu
18 Chapter 3 Settings and Adjustments 3-2. Using OSD menu Basic operation of OSD menu 1 Displaying OSD menu ■ The buttons on the monitor Press . ■ The remote control Press . 2 Setting/Adjusting ■ The buttons on the monitor Use or to select the menu tab and then press . Use to select the set/adjustme...
Page 23 - Chapter 4 Troubleshooting
21 Chapter 4 Troubleshooting Chapter 4 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. Common Problems Possible cause and remedy 1. No picture • Power indicator does not light. • Check whether the power cord is connected properly.• If the ...
Page 24 - Chapter 5 Reference; panel surface facing down.
22 Chapter 5 Reference Chapter 5 Reference 5-1. How to Attach the Optional Arm An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our web site for the corresponding optional arm (or optional stand). http://www.eizo.com ATTENTION • When attaching an ...
Page 26 - Outside Dimensions
24 Chapter 5 Reference Main default settings (factory settings) Function PC input Video input Volume 45 Brightness 50 60 Contrast 50 Sharpness 7 Image Size Fill All Color ― 60 Tint ― 50 Backlight 100 DPMS On OSD Settings Transparency 50 OSD Timeout 45 Mode Light Up View Off Source Scan On Video Aspe...
Page 28 - LIMITED WARRANTY; LIMITED WARRANTY
26 LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY EIZO NANAO CORPORATION (hereinafter referred to as “EIZO”) and distributors authorized by EIZO (hereinafter referred to as the “Distributors”) warrant, subject to and in accordance with the terms of this limited warranty (hereinafter referred to ...
Page 29 - 关于电子信息产品污染控制标识
关于电子信息产品污染控制标识 本标识根据「电子信息产品污染控制管理办法」 ，适用于在中华人民共和国销售的电子信息产品。标识中央的 数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项，在自制造日起算的年限内，不会产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。 • 有毒有害物质或元素的名称及含量 部件名称 有毒有害物质或元素铅 （Pb） 汞 （Hg） 镉 （Cd） 六 价 铬 （Cr（VI） ） 多 溴 联 苯 （PBB） 多 溴 二 苯 醚 （PBDE） 印刷电路板 × ○ ○ ○ ○ ○ 机箱 ○ ○ ○ ○ ○ ○ 液晶显示器 × × ○ ○ ○ ○ 其他 × ○...
