Eizo CH2 - Manual
Eizo CH2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Put screws into the left and right hoods.; Attach the top hood to either the left or; NOTE; Attach the right hood in the same way.; Top Hood
- Page 3 – Slide the top hood to close.; Dimensions
- Page 4 – 廃棄について; 個人のお客様
Thank you very much for choosing an EIZO product.
Please read this User’s Manual carefully to familiarize yourself with safe and effective usage
procedures.
Please retain this manual for future reference.
PRECAUTIONS
To ensure personal safety and proper maintenance, please read this section.
CAUTION
Do not carry the monitor with attaching the hood.
Doing so may cause the hood to drop or slip off, which may result in injury or equipment
damage.
Do not put any object on the hood.
Doing so may cause the hood to drop or monitor to fall, which may result in injury or
equipment damage.
Do not use other screws than the specified ones
.
Doing so may cause the hood to drop, which may result in injury or equipment damage.
Attach only to specified EIZO LCD monitors.
Attach only to specified EIZO LCD monitors. Attaching to other monitors may cause the hood
to drop, which may result in injury or equipment damage. For the specified monitors, please
visit our website at http://www.eizo.com.
Package Contents ________________________________
Please contact your local dealer for assistance if any of the listed items are missing or damaged.
Left Hood
Right Hood
Top Hood
User’s Manual
Screws M3
×
8 4pcs
Screws M3
×
16 4pcs
Screw Caps 6 pcs (2 pcs for spare)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
How to install ____________________________________ 1. Put screws into the left and right hoods. NOTE Attach the hood by using the specified screws with referring to the labels on the packing bags of the screws. By over-driving the screws, the hood cannot attach into the monitor. (1) Put screws into...
4. Slide the top hood to close. Calibration ______________________________________ When calibrating the monitor, the sensor of the measurement device can be attached by sliding the top cover without removing the hood. Sensor Specifications____________________________________ Dimensions(W) × (H) × (D...
故障/修理に関するお問い合わせ先 故障/修理に関するお問い合わせは、EIZOメンテナンスセンター（EIZOサポート）までお願いします。 [EIZOメンテナンスセンター] TEL：0767-52-7700 廃棄について 個人のお客様 自治体の指示に従って廃棄してください。 法人のお客様 産業廃棄物として処理してください。 153 Shimokashiwano, Hakusan, Ishikawa 924-8566 Japan Phone: +81 76 277 6792 Fax: +81 76 277 6793 5710 Warland Drive, Cypress, CA 90630, USA...
