Page 2 - Index
1 Index 1. PRODUCT INTRODUCTION ............................................................................................. 2 1.1. Product Introduction and Features ........................................................................ 2 1.2. Safety Information .....................................
Page 3 - PRODUCT INTRODUCTION; with wired or wireless network connection.; Wired and Wireless Network Connection; connection provides smooth video and audio performance.; Audio Support; speaker or amplifier via built-in audio interface.; No more hassle cables; you can get it installed within 1 minute!; Easy to Setup
2 1. PRODUCT INTRODUCTION 1.1. Product Introduction and Features Thank you for purchasing this wireless projector server - WP-S1000! This projector server is an user-friendly presentation video server, you can connect this server to video projector or any CRT / LCD monitor with 15-pin D-sub video co...
Page 4 - satisfy the needs of different people from different country.; Security; the password often to improve security.; Main Features; Provides wireless presentation without cable swapping.
3 It’s also simple to install client software. The WP-S1000 projector server provides user-friendly web interface, and you can access the interface with Microsoft Internet Explorer, FireFox, or any other web browser. You can start software download from the web and get the software installed on your...
Page 5 - Linux Open-Source Code
4 1.2. Safety Information Please follow the following safety instructions while you’re using this wireless projector server, or you could damage this projector server and yourself. 1. THIS PROJECTOR SERVER IS NOT A TOY! Keep out of reach of children! 2. Do not place this wireless projector server in...
Page 6 - Power
5 1.3. Package Contents Before you unpack the package and continue with installation, please check the contents inside the package. If any item is missing, please return the package to the dealer of purchase. Wireless Projector Server (1 pc) Power Adapter (1 pc) Software USB Flash Disk (2 pcs)...
Page 7 - Front View
6 1.4. Familiar With WP-S1000 Front View These 3 LEDs indicate the system status of WP-S1000 projector server: STATUS DESCRIPTION POWER ON WP-S1000 projector server is powered on OFF WP-S1000 projector server is powered off WLAN ON Wireless LAN function is activated OFF Wireless LAN function is deac...
Page 8 - Back View; PWR; : Connects to the power connector of power adapter.; VGA; : Connects to the video cable of your projector or CRT / LCD monitor; AUDIO; will be restored to factory default.
7 Back View PWR : Push this button to switch on the WP-S1000 projector server (the ‘POWER’ led at the front panel will lit), push this button again to switch off the projector server. 5V DC : Connects to the power connector of power adapter. WARNING: Only use the power adapter comes with product pac...
Page 9 - INSTALL YOUR WIRELESS PROJECTOR SERVER (WPS); Install the software using the USB Flash (Recommended); Installation
8 2. INSTALL YOUR WIRELESS PROJECTOR SERVER (WPS) Step 1) Hardware Installation. Step 2) Make software USB Flash (PnS Token) by yourself. Step 3) Software Installation. Choose one of the following: i. Install the software using the USB Flash (Recommended) ii. Install the software from the WPS (2 nd ...
Page 10 - -Digit Random Login Code
9 3. Connect the video (VGA) cable of the projector to the video (VGA) port (labeled as ‘VGA’) located at the back of the WPS. 4. Connect the audio cable of external speaker (powered) or audio amplifier to the audio port (labeled as ‘AUDIO’) located at the back of the WPS. (Skip this step if this is...
Page 13 - remove the USB flash disk.
12 3. Setup wizard will copy all necessary files to the USB flash disk, please be patient, and do not remove the USB flash disk in this process. When you see this message, the wizard is completed successfully and the USB flash disk is ready to use. Click ‘Finish’ to exit and remove the USB flash dis...
Page 17 - A removable storage named ‘; PnS Token; ’ will be appeared in your computer’s drive,
16 9. To re-connect to the WPS and re-project your PC screen, follow Step 10-13 below. 10. Click on ‘Start’ > ’My Computer’ . 11. A removable storage named ‘ PnS Token ’ will be appeared in your computer’s drive, double-click on it.
Page 18 - icon, and it will start searching for the WPS.
17 12. Then, double-click on ‘ WP-S1000’ icon, and it will start searching for the WPS.
Page 19 - b. User logged out and when
18 13. You’ll be prompted to enter Login Code, which is a 4-digit number displayed at the upper-left corner of the WPS. Enter Login Code and click ‘OK’ to connect to the WPS. You will be connected and the WPS will project your PC screen to the projector automatically. 14. You need to plug-in the USB...
Page 22 - When you see this security warning, click ‘Run’ to continue.
21 6. Click ‘Download’ to begin software download (leave password field blank). 7. Click ‘Run’ to start software installation after the download is completed. 8. When you see this security warning, click ‘Run’ to continue.
Page 23 - Click ‘Next’ to start software installation procedure.
22 9. Click ‘Next’ to start software installation procedure. 10. You’ll be prompted to enter Login Code, which is a 4-digit number displayed at the upper-left corner of the WPS. Enter Login Code and click ‘OK’ to connect to the WPS. You will be connected and the WPS will project your PC screen to th...
Page 25 - Switch to video mode:
24 3. FAMILIAR WITH PRESENTATION CLIENT SOFTWARE 3.1 Presentation Mode Once you login successfully to the projector server, you will be connected and the WPS will project your PC screen to the projector automatically. You will find the Presentation Client Software appears in your computer. Here are ...
Page 26 - Video Playing Mode; Switch to Presentation Mode:
25 3.2 Video Playing Mode Here are descriptions of all buttons: Play / Pause: Click this button to toggle video play / pause mode. After a video file has been loaded, click this button to play the video; you can click this button during video play, to pause playing video. Stop: Stop playing video. O...
Page 28 - MAKE A NEW USB FLASH DISK WITH CLIENT SOFTWARE; instructions to build a new USB flash disk:
27 4. MAKE A NEW USB FLASH DISK WITH CLIENT SOFTWARE (PnS TOKEN) We only provide 2 USB flash disks. If you need more USB flash disks, you can build it using your USB flash disk/pen drive. If you lost the USB flash disk that comes with your projector server, you can rebuild one with your own USB flas...
Page 30 - Click ‘Web Admin’ from the menu of presentation client software:; Language
29 5. USING WEB ADMINISTRATION INTERFACE There are 2 Administrator Accounts in the Web Administration Interface> Conference Control and Admin. Conference Control – To control the process of presentation when more than one presenter are connected. Admin – To configure WPS settings, network setup a...
Page 32 - download in ‘admin’ menu.
31 5.2 Download Click ‘Download’ to enter client software download page, and click ‘Download’ to start download. Password is not required by default; however, you can setup a password for file download in ‘admin’ menu. (Please refer to Page 17)
Page 33 - Conference Control; name to identify the presenters.; admin
32 5.3 Conference Control When you have more than one presenter, you can enter this menu and control the process of the presentation by deciding who is controlling the presentation. You can also see the computer’s name of every presenter. Please note that every presenter can change the name by using...
Page 35 - system firmware. To enter admin menu, click ‘admin’. Enter password as ‘; Default password is ‘admin’.
34 5.4 Admin 1. You can configure network and other parameters of this projector server, or upgrade system firmware. To enter admin menu, click ‘admin’. Enter password as ‘ admin ’, and click ‘Login’ button. Default password is ‘admin’.
Page 40 - Projection Setup; ‘Apply’
39 5.7 Projection Setup You can use this page to setup video resolution, color depth, and refresh rate. Description of every setup items are listed below: Resolution Select video output resolution from dropdown menu, available options are XGA (1024x768), SVGA (800x600), and WXGA (1280x768). Please m...
Page 41 - Change Passwords
40 5.8 Change Passwords You can use this page to change the passwords for Download, Conference Control, and Administration. Description of every setup items are listed below: Download Change the password required for client software download. Please enter the same password for both ‘Enter New Passwo...
Page 42 - Reset to Default; think twice before you click ‘Apply’ button. Then, click on; ‘Reboot System; ’ to reboot the
41 5.9 Reset to Default You can use this Reset to clear all current settings and restore the project server to factory default settings. Click ‘Apply’ to clear all settings and you will not be able to recover any settings, so please think twice before you click ‘Apply’ button. Then, click on ‘Reboot...
Page 43 - Firmware Upgrade; server off during the upgrade process.
42 5.10 Firmware Upgrade If there is new version of firmware (the system software of this projector server) available, you can download it from Edimax’s website, and store the firmware file to your hard disk. Then you can use this page to upload new firmware file to the projector server and replace ...
Page 47 - Reset The Projector Server To Factory Default Setting; Please follow the following instructions to perform the reset:; HERE
46 6.2 Reset The Projector Server To Factory Default Setting In some cases, you may lose the control of your projector server, eg: you forget the administration password, or you can’t get access to the administration interface for some reasons. You can use reset button located at the back of the pro...
Page 48 - Set Up The Wireless Projector Server (WPS) To The Internet; presentations using the information on the Internet.; Use the following IP Address; Subnet Mask – Use the same Subnet Mask of your router.; Disable; on DHCP Server Setup.; All Pass; ) Click ‘Apply ‘and then click ‘Reboot System’ to save your settings.
47 6.3 Set Up The Wireless Projector Server (WPS) To The Internet You can setup the WPS to connect to your router/existing network that has internet connection. By doing this, all computers connected to the WPS wirelessly will be able to access to the Internet via your router. This allows the presen...
Page 49 - - IP Address and Subnet Mask of the router.
48 6) Connect a LAN cable to the WPS’s LAN port and connect it to the LAN port of your router. Application (Example): - IP Address, Subnet Mask and Default Gateway of the WPS. - IP Address and Subnet Mask of the router. 7) All computers that connected to the WPS wirelessly can access to the Internet...
