Page 2 - those shown in this QIG.; For more detailed information about this product, please; The software and specifications are
Copyright © by Edimax Technology Co, LTD. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical...
Page 3 - C A T A L O G; Chapter I: Product Information..................................................................1
C A T A L O G Chapter I: Product Information…………………………………………………………1 1-1 Introduction and safety information .............................................................. 1 1-2 Safety Information ......................................................................................... 1 1-3 System...
Page 4 - CHAPTER IV: Appendix........................................................................62
CHAPTER III: Soft-AP Function.........................................................….…………51 3-1 Switch to AP Mode and Basic Configuration ......................................................... 51 3-2 Security Setting ..............................................................................
Page 5 - Chapter I: Product Information; -1 Introduction and safety information; coverage 3 times further *
1 Chapter I: Product Information 1-1 Introduction and safety information Thank you for purchasing this high-speed wireless network card! Excepting common wireless standards 802.11b/g, this wireless network card is also able to access 802.11n wireless networks - data transfer rate is 150Mbps, and tha...
Page 6 - This is normal and is; CPU : Pentium III 1G above or similar; -4 Package Contents
2 KEEP THIS NETWORK CARD OUT THE REACH OF CHILDREN! 4. This network card will become hot when being used for long time ( This is normal and is not a malfunction) . DO NOT put the network card on a paper, cloth, or other flammable objects after the network card has been used for a long time. 5. There...
Page 8 - CHAPTER II: Driver Installation and Configuration; flip the card over and try again.
4 CHAPTER II: Driver Installation and Configuration 2-1 Network Card Installation Please follow the following instructions to install your new wireless network card: 1. Insert the USB wireless network card into an empty USB 2.0 port of your computer when computer is switched on. Never use force to i...
Page 10 - then click ‘Next’ button, to accept license agreement.
6 If you lose the CD ROM or you prefer the traditional setup procedure, please follow the instruction as following step. 4. Execute ‘Setup.exe’ program inside the CD then the programs will appear. Please read the end user license agreement and click ‘I accept the terms of the license agreement’ then...
Page 12 - If; click ‘Finish’ to complete the driver installation process.
8 7. Now you’ll see the following message, please click ‘Install’ to start utility installation. If you see ‘Found New Hardware’ message again, please ignore it and wait. 8. Please wait while the install procedure is running. When you see this message, please click ‘Finish’ to complete the driver in...
Page 14 - Please note that if you stopped config utility by ‘Exit’ function,
10 11. Please note that if you stopped config utility by ‘Exit’ function, you’ll not be able to maintain the wireless link to the access point you wish to use. In this case, you can start config utility again by clicking ‘Edimax Wireless Utility’ icon from ‘Start’ -> ‘All Programs’ -> ‘Edimax ...
Page 15 - -2 Connect to Wireless Access Point
11 2-2 Connect to Wireless Access Point After the driver is correctly installed, it will try to connect to any unencrypted wireless access point automatically. If you want to connect to a specific wireless access point, or the access point you wish to connect uses encryption, you have to configure t...
Page 18 - you can establish connection with it.
14 2-2-1-1 Scan for Other Wireless Devices There are two kinds of wireless connection mode: Infrastructure and Ad-Hoc. Infrastructure mode is used by wireless access points, which is able to establish wireless connection for you and other wireless / wired network clients. Ad-Hoc mode is also know as...
Page 19 - A B
15 Scan results will be displayed here, please check if the wireless device (access point or another computer) with the SSID you wish to connect is shown here. Scan result includes 6 types of information, they are: A The SSID (Service Set Identifier) of wireless device. If nothing is displayed here,...
Page 21 - There are 4 types of technical information:; information will be displayed here.; Item Name
17 There are 4 types of technical information: General: Displays basic information about this access point, such as SSID, MAC Address, authentication / encryption type, channel etc. WPS: If this access point supports WPS (Wi-Fi Protected Setup), related information will be displayed here. CCX: If th...
Page 24 - ) to see detailed information
20 4. Please ask the owner of the wireless access point you want to connect, and input the correct key here and then click ‘OK’. By checking ‘Show Password’ box, the encryption key you inputted here will be displayed. If the value you inputted here is wrong, you will not be able to connect to this w...
Page 33 - Click ‘Network Connections’.
29 3. Click ‘Start’ button (should be located at the bottom-left corner of windows desktop), click ‘Control Panel’, then click ‘Network and Internet Connections’ in Control Panel. 4. Click ‘Network Connections’.
Page 34 - point you want to use if it’s shown, then click ‘Connect’.
30 5. Right-click ‘Wireless Network Connection’ (it may have a number as suffix if you have more than one wireless network card, please make sure you right-click the ‘Edimax 802.11n Wireless LAN Card), then select ‘View Available Wireless Networks’. 6. All wireless access points in proximity will be...
Page 36 - -3 Profile Management; ‘Launch Config Utility’.
32 2-3 Profile Management If you need to connect to different wireless access points at different time, like of access point of your home, office, cybercafe, or public wireless service, you can store the connection parameters (encryption, passphrase, security etc, etc.) as a profile for every access...
Page 38 - changes, or click ‘Cancel’ to discard changes.
34 2-3-2 Edit an existing profile If you have added a profile before, and you wish to change the content of the profile, you can use this function. Please select a profile from the list first, then click ‘Edit’ button. You’ll be provided with the contents of selected profile, and you can edit them. ...
Page 39 - the list, and click ‘Delete’ button to delete it.
35 2-3-3 Delete an existing profile If you no longer need a profile, you can delete it. Select the profile you wish to delete from the list, and click ‘Delete’ button to delete it.
Page 41 - -4 Advanced Settings; desktop and then click ‘Launch Config Utility’.
37 2-4 Advanced Settings This wireless network card provides several advanced settings for experienced wireless users. You can change these settings to increase data transfer performance, or change operation mode. Please follow the following instructions to set advanced wireless settings: 1. Right-c...
Page 43 - -5 View Network Statistics; detailed information about the wireless connection you’re using.
39 2-5 View Network Statistics The configuration utility provides information about network statistics and link status. If you want to know how your wireless network card works, you can use these functions to get detailed information about the wireless connection you’re using. Please follow the foll...
Page 46 - -7 WPS Configuration; network card will do the rest for you.
42 2-7 WPS Configuration Wi-Fi Protected Setup (WPS) is the latest wireless network technology which makes wireless network setup become very simple. If you have WPS-enabled wireless access point, and you want to establish a secure connection to it, you don’t have to configure the wireless access po...
Page 49 - access point on the list will be selected to establish connection.
45 You can click ‘PBC’ button few more times to try again. When an access point is connected, you can click ‘Disconnect’ to disconnect your wireless network card from a connected access point, or select another WPS-enabled wireless access point, then click ‘Connect’ to establish connection to select...
Page 54 - Click this button to view on-line help documents.
50 2-10 On-line Help If you need to know the directions of how to use specific function in the utility, please click ‘Help’ button. On-line help documents will be presented in Windows help format. Click this button to view on-line help documents.
Page 55 - the internet connection you have!; -1 Switch to AP Mode and Basic Configuration; Edimax utility icon, and select ‘Switch to AP Mode’.
51 CHAPTER III: Soft-AP Function Excepting become a wireless client of other wireless access points, this wireless card can act as a wireless service provider also! You can switch this wireless card’s operating mode to ‘AP’ mode to simulate the function of a real wireless access point by software, a...
Page 56 - you to assign an existing network card with internet connection.
52 A configuration window will appear after you switch the operation mode to ‘AP’, which asks you to assign an existing network card with internet connection. If your computer has another network card which is connected to Internet, please select it from ‘Name’ dropdown menu, and click ‘Enable ICS’;...
Page 59 - -2 Security Setting
55 3-2 Security Setting This wireless card supports wireless encryption in AP mode, which will encrypt the data being transferred over the air to enhance data security level. It’s recommended to enable data encryption unless you wish to open your computer (and its internet connection) to the public....
Page 63 - -4 Connection Table
59 3-4 Connection Table If you want to see the list of all wireless clients connected to this access point, please select ‘Mac Table’ tab from the utility. Here are descriptions of every field: Item Name Description MAC Address Displays the MAC address of this wireless client. AID The serial number ...
Page 66 - CHAPTER IV: Appendix
62 3-7 About The ‘About’ tab provides you the information about version number of the configuration utility, driver, and other important information about your wireless access point. CHAPTER IV: Appendix
Page 67 - Antenna: Internal Antenna
63 4-1 Specification Standards: IEEE 802.11b/g Interface: USB 2.0 (USB 1.1 Compatible) Frequency Band: 2.4000 ~ 2.4835GHz (Industrial Scientific Medical Band) Data Rate: 11b: 1/2/5.5/11Mbps 11g: 6/9/12/24/36/48/54Mbps 11n (20MHz): MCS0-7 (up to 72Mbps) 11n (40MHz): MCS0-7 (up to 150Mbps) Securities:...
Page 76 - FCC and CE Compliance Statements; Federal Communication Commission; Reorient or relocate the receiving antenna.; FCC Caution; other antenna or transmitter.
72 4-4 FCC and CE Compliance Statements Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmfu...
Page 78 - R&TTE Compliance Statement; Safety
74 R&TTE Compliance Statement This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE) The R&TTE ...
