Page 3 - ii; Table of Contents
ii Table of Contents 1. Introduction ....................................................................... 1 Features ............................................................................... 1 Package Contents................................................................ 1 System Requirem...
Page 4 - Features; Supports; Package Contents; USB2.0 to Fast Ethernet Adapter x1
1 1. Introduction The USB 2.0 Ethernet Adapter allows your computer instantly connect to a 10/100Mbps network through simply a USB port; no hassle to open up your computer case as is required for an internal card now! It’s also an ideal USB-to-LAN alternative for gaming console that needs network ac...
Page 5 - LED
2 System Requirements CPU : Pentium III 1G above or similar Memory size : 256MB RAM One CD-ROM drive Hard Disk : At least 100MB available space One available USB port OS: Window 2000/XP/Server 2003/Vista or MAC OS 10.4.x and above LED Status LED Color Description Power Green On for conne...
Page 6 - Driver Installation; With your computer switched on, insert the “USB2.0 to Fast Ethernet
3 2. Driver Installation On Windows 2000/XP/Server 2003/Vista 1. With your computer switched on, insert the “USB2.0 to Fast Ethernet Adapter” into an available USB2.0 port of your computer. The following message will appear on your screen, Please click ‘Cancel’ and use the wizard to install driver.
Page 8 - Verifying the Driver Installation on Windows
5 Verifying the Driver Installation on Windows Once you finish the installation, you can open Windows Device Manager to verify if your Ethernet adapter is properly installed. To access the Device Manager : On Windows Vista: Right-click Computer on the desktop and click Properties > Device Manag...
Page 9 - Continue; to go to next
6 On MAC OS X 10.x 1. Insert the provided driver CD into your CD-ROM drive. Double-click the CD and navigate to the directory of \Drivers\Mac 2. In the directory of Mac10.x, please double-click AX88772_10.4 to execute the installer program. 3. The onscreen prompted and please click on Continue to go...
Page 11 - on; Restart; to take the new settings effect.
8 7. Click on Restart to take the new settings effect. Now the installation is complete. You can connect the adapter to a network device by an Ethernet cable: 1. Connect an Ethernet cable to the Ethernet port on the adapter. 2. Connect the other end of the Ethernet cable to your network hub, switch ...
Page 12 - Verifying the Driver Installation on Mac; then you will find the driver of AX88772.
9 Verifying the Driver Installation on Mac Once you finish the installation of Ethernet Adapter, please navigate to System Profiler > Hardware > USB, then you will find the driver of AX88772. Also navigate to System Preference > Network , please click on Renew DHCP Lease and Apply Now as fo...
Page 13 - Items Descriptions
10 3. Specifications Items Descriptions Network Standards IEEE 802.3: 10Base-T IEEE 802.3u: 100Base-T Data Transfer Rates Ethernet: 10Mbps/20Mbps (Half/Full Duplex) Fast Ethernet: 100Mbps/200Mbps (Half/Full Duplex) Data Bus USB 2.0 (1.1 compliant) LED Indicators Power, Link Power Consumption 850mW P...
Page 14 - the receiver is connected.
11 4. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential in...