Edimax EK-16RO - Manual - manualsarea.com

Page 2 - TABLE OF CONTENTS

TABLE OF CONTENTS INTRODUCTION……………….……………………………………..1 FEATURES…………...……………………………………………….1 PACKAGE CONTENTS……………...…………..……………………2 TECHNICAL SPECIFICATIONS………..…………………………….3 SYSTEM REQUIREMENT…………………………………………..4 CABLE DIAGRAMS………………………………………………….5 PRODUCT DETAILS…………………………………………………5 HARDWARE INSTALL...

Page 4 - Package Contents

Package Contents 8 port KVM Switch 8 port KVM Switch 1 PCS User’s manual 1 PCS AC to DC Power Adapter 1 PCS Stack Kit 1 SET Daisy Chain Cable 1 SET 16 port KVM Switch 16 port KVM Switch 1 PCS User’s manual 1 PCS AC to DC Power Adapter 1 PCS Stack Kit 1 SET Daisy Chain Cable 1 SET

Page 5 - Technical Specifications

Technical Specifications Model No. 8 port KVM Switch 16 port KVM Switch PC Port 8 16 Console Port 1 1 PC Port Connector (All Female Type) PS/2 Keyboard mini Din 6 pin PS/2 Mouse Mini Din 6 pin VGA HDDB 15pin Console Port Connector (All Female Type) PS/2 Keyboard mini Din 6 pin PS/2 Mouse Mini Din 6 ...

Page 6 - System Requirements; 6 port KVM Switch; Console side; Cable Diagrams; Din 5 pin Male to Mini Din 6 pin Female

System Requirements Model No. 8 port KVM Switch Console side One VGA Monitor One PS/2 Keyboard One PS/2 Mouse Computer side 8 HDB 15 pin male to male VGA cables 8 PS/2 cables male to male for Keyboard 8 PS/2 cables male to male for Mouse Model No. 16 port KVM Switch Console side One VGA Monitor One ...

Page 7 - Hardware Installation; Step 1

Hardware Installation Before installation, please make sure all of peripherals and computers have been turned off. This example of installation is based on 8 port KVM Switch and 16 port KVM Switch have the same installation procedures Step 1 Find a convenient place to put your KVM Switch. Its 19” ra...

Page 8 - Step 4; Connect the mouse to the KVM Switch.; Step 5; Step 6; The rear side of PC; Step 7; The rear side of PC; Step 8

Step 4 Connect the mouse to the KVM Switch. Step 5 Now the PC connections will be made with the monitor (VGA) connections first. Connect a VGA cable (15-pin HDDB Male / Male) with the Male side to both of the PC and the rear panel of the KVM switch to the connector labeled VGA. Repeat this for all P...

Page 9 - Step 9; Repeat step 5 to 7 for the remainder of the computers.; OTE; Usage; When you power on KVM switch, it will ask you the password,; the default password value; . Please key in eight zero and enter the same value at retype; -Segment LED Indication

Step 9 Repeat step 5 to 7 for the remainder of the computers. Step 10 Attach the power supply to the KVM unit and plug the other end into an electrical receptacle. Now you will see the LED for Port 1 light up, and you will hear a beep. Switch on your monitor. N OTE : Please be remind to plug in powe...

Page 10 - You will hear a beep for confirmation and the keyboard

Reset Button ( (Bank Select) and (Port Select) ): To press both “select” button and “bank” button of master bank simultaneously can reset KVM switch. This reset action will not only return KVM switch back to initial state --- Check the password, but also re-check all of slave banks which connected t...

Page 11 - ROM REFLASH; Daisy Chain Connection Diagram

To get out of Auto Scan Mode, Press any key or SPACE bar. + + = OSD default value (Note: Not including password) Scroll Lock Scroll Lock R ROM REFLASH Scroll Lock + + = Search the same PC name (Note: Search PC name starting from 1 st PC port) Scroll Lock F F I N D : █ Scroll Lock + + Space bar = On ...

Page 12 - chain bank is eight levels.; Hot Plug

C. Please repeat item B to daisy chain more bank as you want. But, the maximum daisy chain bank is eight levels. D. Before chaining the slave bank up to six banks, you need a VGA extender (Max. 100 feet ) between the fifth bank and the sixth bank to enhance the VGA signal. Maximum 8 Leve ls B a n k ...

Page 13 - On Screen Display Operation; ON

N OTE : Some O.S. (Operation Systems) like SCO Unix are unable to support “ Hot Plug ” function. If you apply “Hot Plug” to this kind of O.S., it will cause unpredictable behavior or shut down the PC. Before attempting to use “ Hot Plug ” , please make sure your O.S. and software driver supports the...

Page 14 - default SCAN time is 10 sec and the maximum scan time is 99 sec.; ENTER : COMPLETE; d. The “ CONSOLE ON/OFF “ means to manage the console of KVM switch. If you

CONSOLE ON/OFF, etc… a. The “ OSD: 10 SEC” means that the OSD windows display or PC system name exists 10 sec. on your monitor. You can modify it from 05 sec to 99 sec. The factory default value is 10 sec.. 15 ☼ SYSTEM 15 16 SYSTEM 16 OSD : 1 0 SEC. ( CHANGE PASSWORD TAB : NEXT INSERT :EDIT ESC : QU...

Page 15 - switch, the CONSOLE will be set up ON state back to OFF state.; panel will stop flashing

switch, the CONSOLE will be set up ON state back to OFF state. e. W hen you finish the set up of PC name and get out of OSD setting mode, you will find the PC name showed at the up-left corner of monitor. Now, you can use ESC key to clear the message right away if you don’t need it. ☼ SYSTEM 02 102 ...

Page 16 - Troubleshooting; KVM Switch unit

Troubleshooting 1. Ensure that all cables are well seated. Label all of cables with the number for each respective computer to avoid confusion. 2. The recommended VGA cable distance is 5 meters maximum without ghosting and degradation. Normally, the cable length is based on driver capacity of your V...

Page 17 - Accessories; Ordering information:; CERTIFICATES

Accessories Ordering information: 1. VGA Extender (DB15 Female to DB15 Female) MAX. 100 feet 2. PC port PS2 Extender (Mini Din 6 Female to Mini Din 6 Female) MAX. 100 feet 3. Daisy Chain port Extender (Mini Din 6 Female to Mini Din 6 Female) MAX. 100 feet 4. PS2 to Serial adapter (Mini Din 6 Female ...

Edimax EK-16RO - Manual

Table of Contents:

Summary

Other Edimax Models