Page 2 - COPYRIGHT
COPYRIGHT Copyright © 2006/2007 by this company. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, c...
Page 4 - Contents
Contents 1. Introduction ...................................................................... 1 2. Product Package ............................................................. 2 3. MFP Server with Print Server .......................................... 3 4. MFP Server Installation in Windows 2000...
Page 9 - MFP Server with Print Server
3 3. MFP Server with Print Server This MFP Server supports dual functionalities: MFP Server Mode and Print Server Mode at the same time. Users can choose one of the modes to share MFP or Printer functions through the MFP Server. MFP Server Mode: The MFP Server can communicate with MFP as it is conne...
Page 11 - MFP Server Installation in Windows; Hardware Installation Procedure
5 4. MFP Server Installation in Windows 2000/XP Before you start, you should have: One computer with Windows 2000 SP4 above and Windows XP SP1 above One MFP or printer with USB port and an installation CD One Category 5 Ethernet Cable One USB Cable 4.1 Hardware Installation Procedure 1. Unpack the M...
Page 12 - Software Installation Procedure
6 4.2 Software Installation Procedure Before you start, you should check your computer’s operating system. This program can be run only in Windows 2000 SP4 above and Windows XP SP1 above. Please follow the steps below to start installation. Tip: You have to uninstall all the MFP server drivers and u...
Page 21 - Server; MFP Manager; Server Manager; Uninstall; About Version
15 15. Choose if you want to run the “MFP Manager” utility automatically when Windows starts. It is recommended to enable the setting. 4.3 MFP Server Utilities After the installation is completed, there will be three utilities and a text file in the MFP Server’s Program folder. MFP Manager – Allows ...
Page 34 - MFP Server List
28 6. MFP Manager 6.1 MFP Server List The “MFP Manager” can automatically find the MFP server in the network and show it in the MFP Server List. Users can select a MFP and click “Connect” to connect the MFP just like you connect the MFP directly to your computer through USB cable. It also displays t...
Page 37 - Favorite
31 6.2 My Favorite You can add the frequently use MFP Servers to “My Favorite” list. The MFP Server in the list will be added to the quick link list when you right click the MFP Server icon in the system tray. Please refer to Section 6.4 to know more about the quick setup functions. My Favorite List...
Page 39 - Auto Connect List
33 6.3 Auto Connect List To let the system connect the MFP server automatically when you want to print a document just like using traditional print server, you can add the MFP into your Auto Connect List. The system will send the printing jobs to the MFP when the MFP Server is idle and not being con...
Page 42 - Setup; Quick Setup
36 6.4 Quick Setup Right click on the MFP Server icon in the system tray you can see the MFP servers you have chosen to “My Favorite List”. You can directly connect or disconnect the MFP and check the MFP information from the here easily. Quick Setup Status The current status of the MFP will be disp...
Page 44 - Settings; Setting; General Setting
38 6.5 Option Settings 6.5.1 General Setting General Setting Run MFP Manager when Windows starts Execute the “MFP Manager” when Windows starts every time. By default, it is enabled. Minimized when start MFP Manager Minimized the “MFP Manager” to an icon in the system tray when you start the “MFP Man...
Page 46 - Server Configuration; General Configuration:
40 7. Server Configuration 7.1 Introduction This chapter introduces MFP Server’s system configuration utility in Windows environment. This utility provides the most complete management and configuration functions on the MFP Server This utility only provides configuration functions for MFP Server its...
Page 47 - Search for All Available MFP Server
41 7.2 Search for All Available MFP Server Every time when you run the “Server Manager” configuration utility, click the “Search” icon on the tool bar. The configuration utility will delay for several seconds as the utility uses system’s available network protocols to search for all MFP Servers on t...
Page 48 - Status of MFP Server
42 7.3 Status of MFP Server Click “Status” icon on the tool bar, the status of the selected MFP Server will be showed on the right side of the window. The information of the MFP Server includes MAC ID, Model Type, Firmware Version, status of each server port, IP address, subnet mask, default gateway...
Page 49 - Setup the MFP Server
43 7.4 Setup the MFP Server Click “Setup” icon on the tool bar, the setup items of the selected MFP Server will be showed on the right side of the window. Double click the icon to set up the selected MFP Server. A screen will pop up to verify “User Name” and “Password” of the MFP Server. The default...
Page 50 - Configuration; Server Name
44 7.5 General Configuration Double click “General” icon and the General configuration window will pop-up. You can see basic MFP Server information in this page. You also can configure the “Server Name”, “User Name” and “Password” here. Server Name , the name of the MFP Server. You can use this name...
Page 53 - System Configuration; Upgrade Firmware; Load Default
47 7.7 System Configuration Double Click “System” icon and the System configuration window will pop-up. In the System configuration page, you can see all available printing protocols and upgrade the new firmware for this MFP Server. Upgrade Firmware : You can use this “Upgrade Firmware” tool to upda...
Page 54 - Force Release; MFP Server Description
48 7.8 MFP Server Management Double Click “MFP Server Management” icon and the MFP Server configuration window will pop-up. You are able to manage the MFP Server as below. Force Release : Select the port number and then click “Force Release” will help to you disconnect the current connection between...
Page 61 - Wizard
55 8.4 Setup Wizard Note: You can configure the MFP Server from the Setup Wizard. To apply the changes, you have to click “Save Settings” in the menu at the left side to restart the MFP Server. 8.4.1 System You can change the MFP Server name and password of the MFP Server here. MFP Server Name, the ...
Page 65 - Tools; Default
59 8.5 System Tools 8.5.1 Load Default You can use this page to restore the factory default settings. All of your previous setup will be reset.
Page 66 - Firmware
60 8.5.2 Upgrade Firmware You can upgrade the latest firmware for this MFP Server in this page. Click “Browse” to select the firmware in your storage and then click “OK”, the firmware will be updated in several minutes. Be aware that if you have started upgrading firmware, you have to follow all the...
Page 84 - MFP Server Installation in Windows
78 12. MFP Server Installation in Windows 98SE/Me/NT This MFP Server supports TCP/IP network protocol and IPP, RAW and LPR printing protocols, it can be a print server when you operate it in Windows 98SE/Me/NT/2000/XP/2003, Unix/Linux and MAC OS. The IPP and RAW printing protocols can be used in Win...
Page 85 - Software Installation Procedure
79 12.1 Software Installation Procedure The following are the installation steps in Windows 98SE. To install MFP Server in Windows Me/NT, the procedures are similar. 1. Insert the CD shipped along with the MFP server into your CD-ROM drive. The Autorun.exe program should be executed automatically. I...
Page 92 - Server Utilities; Network Port Setup –; Server Configuration
86 12.2 Server Utilities After the installation is completed, there will be three utilities and a text file in the MFP Server’s Program folder. Network Port Setup – Add the network ports of MFP Server within the network. Server Configuration – Allows you to configure IP Address, network protocols an...
Page 93 - Network Port Setup
87 12.3 Network Port Setup “Network Port Setup” Utility offers a very simple method to add or remove MFP Server’s printer port from the client’s computer. During the MFP Server’s installation procedure, the system will automatically search for all MFP Servers on the network, and add the printer port...
Page 106 - Configure Remote LPD Printing on the Host
100 13.2.4 Configure Remote LPD Printing on the Host The procedure you use to configure your Unix/Linux host(s) to allow printing to your network remote MFP Server varies between different varieties of Unix/Linux. The procedures below can be used for Unix/Linux variants that are related to BSD Unix,...
Page 108 - MFP Server Installation in MAC OS
102 14. MFP Server Installation in MAC OS LPR Printing (Line Printer Remote technology) allows Macintosh computers to connect to MFPs or printers via TCP/IP. LPR Printing can be set up on any Macintosh with version 9.x above. 14.1 MAC 10.4.x To enable LPR Printing in Macintosh 10.4.x, please follow ...
Page 116 - MFP Model
110 Appendix: MFP Server Compatibility List The compatibility information is the first released in August 2006. For the latest information, please contact with your dealer. Note: “N/A” means that the MFP doesn’t support the function. “ -- ” means that the function is not being tested yet. Windows 20...