Page 2 - English
2 English Copyright © by Edimax Technology Co, LTD. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical...
Page 3 - C A T A L O G
3 C A T A L O G Chapter I: Product Information ....................................................................................... 6 1-1 Introduction and safety information .......................................................................... 6 1-2 Safety Information ..........................
Page 6 - Chapter I: Product Information; -1 Introduction and safety information
6 Chapter I: Product Information 1-1 Introduction and safety information Thank you for purchasing Edimax BR-6225n / BR-6226n nLite wireless broadband router! This high cost-efficiency router is the best choice for Small office / Home office users, all computers and network devices can share a single...
Page 9 - -3 System Requirements
9 1-3 System Requirements z Internet connection, provided by xDSL or cable modem with a RJ-45 Ethernet port. z Computer or network devices with wired or wireless network interface card. z Web browser ( Microsoft Internet Explorer 4.0 or above, Netscape Navigator 4.7 or above, Opera web browser, or S...
Page 11 - Front Panel
11 1-5 Familiar with your new wireless broadband router Front Panel LED Name Light Status Description PWR ON Router is switched on and correctly powered WLAN On Wireless network is switched on Off Wireless network is switched off Flashing Wireless LAN activity (transferring data) or WPS mode is on. ...
Page 12 - Back Panel; Item Name
12 Back Panel BR-6226n BR-6225n Item Name Description Antenna High gain 3dBi Antenna ON/OFF Enable / Disable wireless signal You can not connect the router via wireless adapter, when you disable (OFF) the wireless signal. 12V (Power) Power connector, connects to power adapter Reset / WPS Reset the r...
Page 13 - -1 Establish network connection
13 Chapter II: System and Network Setup 2-1 Establish network connection Please follow the following instruction to build the network connection between your new Broadband router and your computers, network devices: 1. Connect your xDSL / cable modem to the WAN port of router by Ethernet cable. 2. C...
Page 15 - -2 Setup client computers to obtain IP address automatically; Before you can connect to the router and start configuration
15 2-2 Setup client computers to obtain IP address automatically After the network connection is established, the next step you should do is setup the router with proper network parameters, so it can work properly in your network environment. Before you can connect to the router and start configurat...
Page 24 - -3 Connect to broadband router by web browser
24 2-3 Connect to broadband router by web browser Default IP address of this broadband router is ‘192.168.2.1’, and you can connect to broadband router’s web-based configuration interface by any connected computer with web browser (Internet Explorer 5.x or above, Firefox, or Netscape). Please input ...
Page 27 - please note that this value may be different.; by ‘IP Address’ begins with ‘169’, please recheck network connection
27 Input ‘ipconfig’, then press ‘Enter ’ key. Please check the IP address followed by ‘Default Gateway’ (In this example, the IP address of router is 192.168.2.1, please note that this value may be different. ) If you tried the instructions listed above and still can not find the IP address of this ...
Page 28 - -4 Using ‘Quick Setup’
28 2-4 Using ‘Quick Setup’ This broadband router provides a ‘Quick Setup’ menu, and you can setup basic parameters of this broadband router. Please follow the following instructions to use ‘Quick Setup’ menu: 1. Click ‘Quick Setup’ after logged in.
Page 39 - Description
39 Now please go to PPTP settings section: Here are descriptions of every setup items: Item Name Description User ID Please input user ID (user name) assigned by your Internet service provider here. Password Please input the password assigned by your Internet service provider here. PPTP Gateway Plea...
Page 40 - Idle Time Out
40 ‘Continuous’ - keep internet connection alive, do not disconnect. ’Connect on Demand’ - only connects to Internet when there’s a connect attempt, Manual - only connects to Internet when ‘Connect’ button on this page is pressed, and disconnects when ‘Disconnect button is pressed. Idle Time Out Ple...
Page 46 - Here you will see the Access Point which you select.
46 2-4-7 WISP (Wireless ISP Connection mode) You can connect with ISP via the router wirelessly, because the router provides WISP connection mode. Click “ Enable “ and “ Select Site Survey “ button Here you will find many Wireless Access Points as follows. To Choose an Access Point which you would l...
Page 48 - Chapter III: General Setup
48 Chapter III: General Setup The ‘General Setup’ is for you to setup “System, WAN, LAN, Wireless, and others ( Advance settings ) “. Please follow the following instructions to use ‘General Setup’ menu: 1. Click ‘General Setup’ after logged in.
Page 73 - If you have no idea on how to define an IP address plan for your
73 Suggestions on IP address numbering plan: If you have no idea on how to define an IP address plan for your network, here are some suggestions. 1. A valid IP address has 4 fields: a.b.c.d, for most of home and company users, it’s suggested to use 192.168.c.d, where c is an integer between 0 and 25...
Page 75 - The number of the last field (mentioned ‘d’ field) of ‘End IP’ must be
75 3-3-3 DHCP Server You can use this setting to decide the range of IP address leases. Here are descriptions of every setup items: Item Name Description Start IP Please input the start IP address of the IP leases range. End IP Please input the end IP address of the IP leases range. Domain Name If y...
Page 86 - Auto MAC Clone
86 MAC’ button to use the MAC address of your computer (the one you used to connect to the web management interface currently). Auto MAC Clone If you wish to use the MAC address of wired LAN interface of this broadband router, select ‘Enable’, or select ‘Disable’ to not to use the MAC address of the...
Page 98 - Encryption is disabled. It’s; not recommended; to disable encryption
98 3-4-1-7 Set Security In certain AP working modes, you can enable encryption to improve security level. When you click ‘Set Security’ button, the following window will appear: Please select an encryption method from ‘Encryption’ dropdown menu, and corresponding setting will appear: Disabled Encryp...
Page 123 - Apply
123 3-5-2-3 UPnP Settings Parameters Default Description UPnP Feature Disable You can Enable or Disable UPnP feature here. After you enable the UPnP feature, all client systems that support UPnP, like Windows XP, can discover this router automatically and access the Internet through this router with...
Page 124 - > at the bottom of the screen to save the configurations.
124 3-5-2-4 ALG Settings You can select applications that require “Application Layer Gateway” support. Parameters Default Description Enable You can enable “Application Layer Gateway” function, and the router will let selected application correctly pass though the NAT gateway. Click < Apply > ...
Page 146 - Chapter IV EZ View
146 Chapter IV EZ View Many network devices like printer, IP camera, and multi-media adapters support UPnP (Universal PnP) function. Those UPnP-compatible devices can communicate with each other, and make appropriate configurations. This broadband router is capable to scan the local network and find...
Page 161 - Statistics
161 5-6 Statistics This page shows the statistical information of network interfaces of this broadband router, and the total system uptime.
Page 167 - Chapter VII : Language
167 Chapter VII : Language This broadband router’s web-based user interface supports 12-languages . You can change the display language by click ‘Language’ button in main menu. To change the display language, follow the following instructions: 1. Click ‘Language’ button from main menu: