Page 5 - warning; Front Panel
1) Local Area Network (LAN) The Broadband router’s 4 LAN ports are where you connect your LAN’s PCs, printer servers, hubs and switches etc. 2) Wide Area Network (WAN) The WAN port is the segment connected to your xDSL or Cable modem and is linked to the Internet. 3) Reset The Reset button allows yo...
Page 6 - Setup Diagram
Setup Diagram Figure 1.2 below shows a typical setup for a Local Area Network (LAN). Figure 1.2 6
Page 7 - Getting started
Getting started This is a step-by-step instruction on how to start using the router and get connected to the Internet. 1) Setup your network as shown in the setup diagram above (fig 1.2). 2) You then need to set your LAN PC clients so that it can obtain an IP address automatically. All LAN clients r...
Page 9 - Note
2c) Windows 2000 1: Click the Start button and select Settings , then click Control Panel . The Control Panel window will appear. 2: Double-click Network and Dial-up Connections icon. In the Network and Dial-up Connection window, double-click Local Area Connection icon. The Local Area Connection win...
Page 12 - Quick Setup Wizard
Menu Description Quick Setup Wizard (Chapter 1) Select your Internet connection type and then input the configurations needed to connect to your Internet Service Provider (ISP). General Setup (Chapter 2) This section contains configurations for the Broadband router’s advance functions such as: Addre...
Page 13 - in; based on your selection.
Chapter 1 Quick Setup The Quick Setup section is designed to get you using the broadband router as quick as possible. In the Quick Setup you are required to fill in only the information necessary to access the Internet. Once you click on the Quick Setup Wizard in the HOME page, you should see the sc...
Page 14 - Step 2) Broadband Type; Cable Modem; optional
Step 2) Broadband Type In this section you have to select one of four types of connections that you will be using to connect your broadband router’s WAN port to your ISP (see screen below). Note : Different ISP’s require different methods of connecting to the Internet, please check with your ISP as ...
Page 15 - Clone MAC Address”; Congratulations
Parameter Description Host Name If your ISP requires a Host Name, type in the host name provided by your ISP, otherwise leave it blank if your ISP does not require a Host Name. MAC Address Your ISP may require a particular MAC address in order for you to connect to the Internet. This MAC address is ...
Page 18 - General Setup
Chapter 2 General Settings Once you click on the General Setup button at the Home Page, you should see the screen below. If you have already configured the Quick Setup Wizard you do NOT need to configure anything thing in the General Setup screen for you to start using the Internet. The General Setu...
Page 19 - System Settings; Select the period in which you wish to start daylight Savings Time
2.1 System The system screen allows you to specify a time zone, to change the system password and to specify a remote management user for the broadband router. Parameter Description System Settings Time Zone Select the time zone of the country you are currently in. The router will set its time based...
Page 20 - Current Password; or start using the router (with the advance settings in place)
2.1.2 Password Settings You can change the password required to log into the broadband router's system web-based management. By default, there is no password. So please assign a password to the Administrator as soon as possible, and store it in a safe place. Passwords can contain 0 to 30 alphanumeri...
Page 21 - host in the Internet that will have management/configuration; Enabled; box to enable the Remote Management function.; Select “Enabled” to enable the remote management function.
2.1.3 Remote Management The remote management function allows you to designate a host in the Internet the ability to configure the Broadband router from a remote site. Enter the designated host IP Address in the Host IP Address field. Parameter Description Host Address This is the IP address of the ...
Page 25 - LAN IP
2.2.8 DDNS DDNS allows you to map the static domain name to a dynamic IP address. You must get an account, password and your static domain name from the DDNS service providers. This router supports DynDNS and TZO. Parameter Default Description Enable/Disable Disable Enable/Disable the DDNS function ...
Page 26 - IP Address Pool
802.1d Spanning Tree Disabled If 802.1d Spanning Tree function is enabled, this router will use the spanning tree protocol to prevent from network loop happened in the LAN ports. DHCP Server Enabled You can enable or disable the DHCP server. By enabling the DHCP server the router will automatically ...
Page 29 - Example: Virtual Server
Example: Virtual Server The diagram below demonstrates one of the ways you can use the Virtual Server function. Use the Virtual Server when you want the web server located in your private LAN to be accessible to Internet users. The configuration below means that any request coming form the Internet ...
Page 32 - Filter client PCs by IP
2.5 Firewall The Broadband router provides extensive firewall protection by restricting connection parameters, thus limiting the risk of hacker attack, and defending against a wide array of common Internet attacks. However, for applications that require unrestricted access to the Internet, you can c...
Page 34 - Example: Access Control
Click < Apply Changes> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place) Example: Access Control In the example below, LAN client A can only access websites that use Port 80....
Page 35 - If Internet attacks occur the router can log the events.
2.5.2 URL Blocking You can block access to some Web sites from particular PCs by entering a full URL address or just keyword of the Web site. Parameter Description Enable URL Blocking Enable/disable URL Blocking Add URL Keyword Fill in “URL/Keyword” and then click “Add”. You can enter the full URL a...
Page 36 - Enable DMZ; Server function will have priority over the DMZ function.
2.5.4 DMZ If you have a local client PC that cannot run an Internet application (e.g. Games) properly from behind the NAT firewall, then you can open the client up to unrestricted two-way Internet access by defining a DMZ Host. The DMZ function allows you to re-direct all packets going to your WAN p...
Page 37 - View the Broadband router’s current setting status; Status and Information; Internet Connection
Chapter 3 Status The Status section allows you to monitor the current status of your router. You can use the Status page to monitor: the connection status of the Broadband router's WAN/LAN interfaces, the current firmware and hardware version numbers, any illegal attempts to access your network, and...
Page 38 - Quick Setup Wizard/General Setup
Parameter Description Internet Connection This page displays whether the WAN port is connected to a Cable/DSL connection. It also displays the router’s WAN port: WAN IP address, Subnet Mask , and ISP Gateway as well as the Primary DNS and Secondary DNS being used. 3.3 Device Status View the Broadban...
Page 39 - Active DHCP Client Table; IP; View the statistics of packets sent and received on WAN and LAN.; packets sent and received on WAN and LAN.
3.5 Active DHCP Client Table View your LAN client's information that is currently linked to the Broadband router's DHCP server Parameter Description DHCP Client Log This page shows all DHCP clients (LAN PCs) currently connected to your network. The “Active DHCP Client Table” displays the IP address ...
Page 40 - Configuration Tools
Chapter 4 Tool This page includes the basic configuration tools, such as Configuration Tools (save or restore configuration settings), Firmware Upgrade (upgrade system firmware) and Reset. Parameter Description Configuration Tools You can save the router’s current configuration, restore the router’s...
Page 41 - Firmware Upgrade; Reset; Your settings will not be changed
4.2 Firmware Upgrade This page allows you to upgrade the router’s firmware Parameter Description Firmware Upgrade This tool allows you to upgrade the Broadband router’s system firmware. To upgrade the firmware of your Broadband router, you need to download the firmware file to your local hard disk, ...
Page 42 - Install Print Server Network Driver
Chapter 5 (For BR-6104KP only) 5.1 Install Print Server Network Driver 1. Execute Client.exe inside the CD\BR-6104KP folder and the “PrintServer Network driver Setup program” window will be displayed. 2. Click “Next” and specify the destination folder where the utility will be installed. 3. Click “N...
Page 44 - Add a Network Printer; Click “Start” button, choose “Setting
5.2 Add a Network Printer After installing the print server client tool, you can then perform the standard “Add Printer” procedure to add network printer to your PC. 1. Click “Start” button, choose “Setting Î Printers”. 2. Double click “Add New Printer”. 3. Select “Local Printer” and click “Next”. 4...
Page 46 - IP address; The router’s IP address is the one entitled; Default Gateway; Your PC’s MAC Address is the one entitled; Physical Address; the connection will automatically be disconnected.
Appendix A How to Manually find your PC’s IP and MAC address 1) In Window’s open the Command Prompt program 2) Type Ipconfig /all and <enter> • Your PC’s IP address is the one entitled IP address (192.168.1.77) • The router’s IP address is the one entitled Default Gateway (192.168.1.254) • You...
Page 47 - ISP Gateway Address:
IP Address and Network (Subnet) Mask: IP stands for Internet Protocol. An IP address consists of a series of four numbers separated by periods, that identifies a single, unique Internet computer host in an IP network. Example: 192.168.2.1. It consists of 2 portions: the IP network address, and the h...
Page 48 - Many devices support a graphical user interface that is based
particular network (as opposed to valid IP address numbers recognized by the Internet, which must be assigned by InterNIC). TCP/IP, UDP: Transmission Control Protocol/Internet Protocol (TCP/IP) and Unreliable Datagram Protocol (UDP). TCP/IP is the standard protocol for data transmission over the Int...
