Eaton IT-RSS - Manual
Eaton IT-RSS – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Register Your Warranty On-Line at
- Page 3 – NTRODUCTION; Model / Surge Current; In this example, Catalog Number; IT-RSS System Wiring and Maximum Voltages; Split Phase
- Page 4 – Precautions; WARNING; in this manual denotes a potential hazard associated; The use of the word; in this manual denotes a potential hazard associated
- Page 5 – NSTALLATION; Installation; Perform or plan the following before installing the SPD:
- Page 7 – Installing Circuit Interrupt Devices; Table 2-1. Wire and Circuit Interrupt Device Requirements; Type
- Page 8 – Figure 2-1. Conduit Installation Guidelines; Mounting the SPD; and may create safety hazard.
- Page 9 – Wiring SPD to Electrical System; connected to the system’s isolated Ground bus.
- Page 10 – Power Up and System Checkout; Should there be a
Effective Date 2/2007
For more information visit:
www.itvss.com
Contents
Page
1
Introduction ............................................................................. 1
1.1
Scope......................................................................... 1
1.2
XT-40 Catalog Numbering System ............................ 1
1.3
IT-RSS System Wiring and Maximum Voltages ........ 1
1.4
Safety Precautions..................................................... 2
2
Installation............................................................................... 3
2.1
Before Installation ...................................................... 3
2.2
XT-40 Wiring Diagrams ............................................. 4
2.3
IT-RSS Wiring Diagram ............................................. 5
2.4
Installing Circuit Interrupt Devices ............................. 5
2.5
Conduit Installation .................................................... 6
2.6
Mounting the SPD...................................................... 6
2.7
Wiring SPD to Electrical System ............................... 7
2.8
Power Up and System Checkout............................... 8
Instruction Manual:
IM01005012E
Rev. 1 – February 2007
Innovative Technology
®
TVSS Products
XT-40 & IT-RSS
Installation
XT-40 / IT-RSS
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
IM01005012E XT-40 & IT-RSS Installation Page A Rev. 1 – 2/2007 Register Your Warranty On-Line at http://www.itvss.com/ Notice: Product improvements and enhancements are continuous; therefore the specifications and information contained in this document may change without notice. Eaton Corporatio...
XT-40 & IT-RSS Installation IM01005012E Rev. 1 – 2/2007 Page 1 1 I NTRODUCTION 1.1 Scope This installation manual contains the information necessary to install Eaton Corporation’s XT-40 and IT-RSS Surge Protective Devices (SPDs). System wiring and voltage information for these devices are provid...
IM01005012E XT-40 & IT-RSS Installation Page 2 Rev. 1 – 2/2007 1.4 Safety Precautions A licensed/qualified electrician must complete all instructions and measurements described in this instruction in accordance with the U.S. National Electrical Code, state and local codes, or other applicable co...
