Eaton ASY0673 - Manual

Eaton ASY0673

Eaton ASY0673 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
43 Page 43
44 Page 44
45 Page 45
46 Page 46
47 Page 47
48 Page 48
49 Page 49
50 Page 50
51 Page 51
52 Page 52
53 Page 53
54 Page 54
55 Page 55
56 Page 56
57 Page 57
58 Page 58
59 Page 59
60 Page 60
61 Page 61
62 Page 62
63 Page 63
64 Page 64
65 Page 65
66 Page 66
67 Page 67
68 Page 68
69 Page 69
70 Page 70
71 Page 71
72 Page 72
73 Page 73
74 Page 74
75 Page 75
76 Page 76
77 Page 77
78 Page 78
79 Page 79
80 Page 80
81 Page 81
82 Page 82
83 Page 83
84 Page 84
85 Page 85
86 Page 86
87 Page 87
88 Page 88
89 Page 89
90 Page 90
91 Page 91
92 Page 92
93 Page 93
94 Page 94
95 Page 95
96 Page 96
97 Page 97
98 Page 98
99 Page 99
100 Page 100
101 Page 101
102 Page 102
103 Page 103
104 Page 104
105 Page 105
106 Page 106
107 Page 107
108 Page 108
109 Page 109
110 Page 110
111 Page 111
112 Page 112
113 Page 113
114 Page 114
115 Page 115
116 Page 116
117 Page 117
118 Page 118
119 Page 119
120 Page 120
121 Page 121
122 Page 122
123 Page 123
124 Page 124
Page: / 124

Table of Contents:

  • Page 2 – Requesting a Declaration of Conformity
  • Page 3 – Class A EMC Statements; VCCI Notice
  • Page 4 – Special Symbols; RISK OF ELECTRIC SHOCK; - Indicates that a risk of electric shock is present and the
  • Page 5 – Table of Contents
  • Page 6 – Operation
  • Page 7 – The Eaton
  • Page 8 – Safety Warnings; IMPORTANT SAFETY INSTRUCTIONS
  • Page 9 – Consignes de Sécurité; CONSIGNES DE SÉCURITÉ IMPORTANTES; Les modules de batterie à utiliser dans le système Eaton 9170+
  • Page 10 – Advertencias de Seguridad; INSTRUCCIONES DE SEGURIDAD IMPORTANTES
  • Page 11 – Physical Features; Front Cover
  • Page 12 – Front Panel Display
  • Page 13 – DB-9 Communication Port
  • Page 15 – Setup, including clearances and location requirements; Equipment Clearances; ) at the sides of the UPS for
  • Page 16 – Location Requirements; Place the cabinet in its intended operating location.
  • Page 17 – hex-style socket wrench to turn each bolt; Do not use the caster bolts to level the cabinet.
  • Page 18 – Caster Cart; Figure 7. Three-Slot Cabinet Being Lowered onto Caster Cart
  • Page 19 – To install the caster cart:; customer-supplied screws; for the intended
  • Page 20 – Stabilizer Bracket; Figure 8. Stabilizer Bracket Installation; containing brackets and required hardware, is available.
  • Page 21 – Tab Slots; Figure 9. Metal Clip Nut and Tab Slot Locations
  • Page 22 – Select the position for the UPS in the equipment rack.; Floor Anchor Kit Installation; Measurement
  • Page 23 – Figure 11. Floor Anchor Brackets Bolted to UPS Cabinet; Moving the Cabinets; Verify that the cabinet contains no power or battery modules.
  • Page 24 – Pry the caps out of the bolt access holes.
  • Page 25 – through separate; — to the bypass switch, as shown in Figure 12.
  • Page 26 – External Batteries; Figure 12. Typical Installation with a Bypass Switch
  • Page 27 – Input Current Ratings; UPS Capacity
  • Page 28 – Table 2. Recommended Wire Sizes; Input Circuit Breaker Size; This table lists the mm; Bypass Switches; The bypass switch has four positions as described in Table 3.
  • Page 29 – Table 3. Bypass Switch Positions; Switch Position; LINE; Bypass Switch Operation
  • Page 30 – Help
  • Page 31 – Table 4. Bypass Switch Specifications
  • Page 32 – UPS Installation with an External Bypass Switch; To install the UPS with an external bypass switch:
  • Page 33 – Entrance Panel
  • Page 34 – Figure 15. UPS Input and Output Terminals
  • Page 35 – Figure 16 shows a sample label.
  • Page 36 – Wire the UPS for the proper input voltage as shown in Figure 17.; GND; Figure 17. UPS Input Wiring
  • Page 37 – Figure 19. Universal Power Modules
  • Page 38 – Plastic Cable Tie; Figure 20. Input Control Signal Wiring (for MBB Bypass Switch)
  • Page 39 – Generator Set; Figure 21. Input Control Signal Wiring (for External Controls)
  • Page 40 – System Wiring Diagrams; Table 5. UPS with Bypass Wiring Diagrams
  • Page 41 – The customer must provide input overcurrent protection.; The customer must size the AC circuit conductors.; All AC circuit; The customer must provide output overcurrent protection.; See NEC
  • Page 45 – Figure 25. Typical Installation without a Bypass Switch
  • Page 47 – Table 7. Recommended Wire Sizes
  • Page 48 – UPS Electrical Installation; To install the UPS without an external bypass switch:
  • Page 50 – Figure 27. UPS Input and Output Terminals
  • Page 51 – Wire the UPS for the proper input voltage as shown in Figure 28.; Figure 28. UPS Input Wiring
  • Page 52 – Figure 30. Universal Power Modules
  • Page 53 – Figure 31. Input Control Signal Wiring
  • Page 54 – Table 8. Wiring Diagrams
  • Page 59 – Yes
  • Page 60 – Figure 35. Isolated Outputs – Single-Phase Voltages; with Isolated Output Option; Figure 36. Isolated Outputs – Derived Three-Phase Voltages; Neutral-to-Ground Bonding for Isolated Output
  • Page 67 – To install an external battery cabinet:
  • Page 68 – Figure 42. UPS Power Entrance Panel
  • Page 69 – Cable Assembly; Figure 44. Bus-Bar Extension Installation
  • Page 70 – Figure 45. Battery Cable Assembly Installation
  • Page 71 – Figure 46. Battery Cable Installed in Battery Cabinet
  • Page 72 – Figure 47. Connecting Additional Battery Cabinets
  • Page 73 – Power and Battery Module Installation; Insert the battery modules into the cabinet.
  • Page 74 – Figure 48. Inserting the Modules
  • Page 75 – Startup for Plug-Receptacle Units; Figure 49. Communication Port
  • Page 76 – Figure 50. Balancing Receptacle Loads
  • Page 77 – Startup for Hardwired Units; To start a hardwired unit:
  • Page 80 – Turn on the equipment that is connected to the UPS.; Initial Startup Parameters; and; ENTER PASSWORD
  • Page 81 – Set Time
  • Page 82 – Set Redundancy; or; No; Press the ON button on this screen to start the UPS.
  • Page 83 – Double Conversion; Figure 52. UPS Operating Modes Under Auto Mode Control
  • Page 84 – Figure 53 shows the basic functional elements of the UPS.
  • Page 85 – Turning the UPS On; Removing Input Power
  • Page 86 – Wout; Figure 54. UPS Front Panel; Item; A and B
  • Page 87 – Using the Front Panel Display; Figure 55. Typical Front Panel Display
  • Page 88 – Config OFF Menu
  • Page 89 – Parameters; Changing Parameter Settings
  • Page 90 – Reading the Eaton 9170+ System Logs; Inverter Log; button to; Figure 57. Inverter Log Entry; Message; Line Fault
  • Page 91 – Alarm Log; Low Battery; Figure 58. Alarm Log Entry; Open Cell; Figure 59. Alarm Entry for Specific Slot Number
  • Page 92 – Table 12 lists the alarm log messages.; Battery Test
  • Page 93 – Menu Map
  • Page 95 – Power Management and Protection Software
  • Page 96 – ConnectUPS; Dedicated Input Signals; Connection to a facility Emergency Shutdown
  • Page 97 – An external signal can indicate that the input power is
  • Page 98 – Pin
  • Page 99 – Maintenance; Routine Maintenance; Inspect and clean the cabinet.
  • Page 100 – Storage Temperature; shelf life if they are kept below +25; Battery Replacement; To replace battery modules in pairs:
  • Page 101 – Pull the module out approximately 17 cm (7; Power Module Replacement; Remove the front cover.
  • Page 102 – Replace the front cover.
  • Page 103 – Specifications; Electrical input and output; DC fuse and battery charger overvoltage limit network; Table 15. Application of Neutral to Ground Bonding
  • Page 104 – NA
  • Page 105 – CAUTION
  • Page 110 – Table 18. Environmental and Safety; Optimal battery performance: 25
  • Page 111 – Table 20. Weights and Dimensions; Cabinet Size; Optional floor anchor kit weighs 4 kg (9 lb)
  • Page 113 – Troubleshooting; Table 21. Frequently Asked Questions; Answer; Turn off the alarm beeps?
  • Page 114 – To view or change the redundancy level, go to menu 4 2 5.
  • Page 115 – Alarms; S High AC Input; Figure 61. Typical System Active Alarm Display; M Batt Test Failed 1; Figure 62. Detailed Alarm Entry
  • Page 116 – When an alarm occurs, follow these steps:; Table 22. Critical Alarm Messages; Alarm Message
  • Page 117 – What to Do
  • Page 119 – Service and Support; Local; Eaton Customer Support Center; Eaton; for the dealer or distributor nearest you.
  • Page 121 – Warranty; LIMITED WARRANTY PERIOD:
  • Page 122 – WHAT THIS LIMITED WARRANTY DOES NOT COVER:; LIMITATION OF LIABILITY:
  • Page 123 – COSTS NOT RELATED TO WARRANTY:; Load Protection Guarantee (US and Canada); WHAT THIS GUARANTY COVERS:
  • Page 124 – WHAT THIS GUARANTY DOES NOT COVER:
Loading the manual

Powerware Series

Eaton 9170

+

UPS

3–18 kVA
User's Guide

®

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Requesting a Declaration of Conformity

Requesting a Declaration of Conformity Units that are labeled with a CE mark comply with the following harmonized standards and EU directives: S Harmonized Standards: EN 50091-1-1 and EN 50091-2; IEC 60950 Third Edition S EU Directives: 73/23/EEC, Council Directive on equipment designed for use with...

Page 3 - Class A EMC Statements; VCCI Notice

Class A EMC Statements FCC Part 15 NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferencewhen the equipment is operated in a co...

Page 4 - Special Symbols; RISK OF ELECTRIC SHOCK; - Indicates that a risk of electric shock is present and the

Special Symbols The following are examples of symbols used on the UPS or accessories to alert you to importantinformation: RISK OF ELECTRIC SHOCK - Indicates that a risk of electric shock is present and the associated warning should be observed. CAUTION: REFER TO OPERATOR'S MANUAL - Refer to your op...

Other Eaton Models

All Eaton Other