Eaton APR48 Manual - Free PDF Download

Page 1 - Quick Start Guide Cover Information

Cover information for the Data Power Solutions Quick Start Guide, referencing the Install and Operation manual and providing contact details.

Page 2 - Legal Disclaimer and Copyright Notice

Disclaimer regarding liability, warranty, intellectual property rights, and copyright information for the document.

Page 3 - Table of Contents

Outline of sections in the Quick Start Guide covering worldwide support, system description, installation procedures, commissioning, specifications, and contact information.

Page 4 - Worldwide Support Contact Information

Contact telephone numbers for various regions and guidance resources for technical assistance and translation.

Page 5 - APS3 and APS6 Series System Description

General description of the APS3 and APS6 Series (48V) DC Power Systems, including components like rectifier modules, supervisory modules, circuit breakers, output terminals, input requirements, and battery options.

Page 6 - Low Voltage Disconnect Feature Warnings

Pre-installation warnings and input requirements related to the Low Voltage Disconnect (LVD) feature, including fuse specifications and power cord limitations.

Page 7 - APS3-06X Safety and Installation

Safety and installation instructions for the APS3-06X power system concerning AC input requirements, circuit breaker specifications, fuse ratings, electrical safety standards, and wire gauge requirements.

Page 8 - AP53-06X Power Supply Unit Installation

Safety and installation instructions for the AP53-06X power supply units, detailing AC power cord requirements, grounding conductor size, fuse specifications, and rules for connecting multiple power cords.

Page 9 - Electrical Installation Requirements

Installation requirements for APS3-06X and APS6-05X systems, covering AC input specifications (cable sizing, grounding, fuses), equipment classification, and output characteristics for Ethernet devices.

Page 10 - Safety Precautions for Batteries and Rectifiers

Precautions for battery installation, avoiding short circuits, using insulated tools, proper lifting techniques, rectifier safety (blanking panels), and avoiding electrical shock.

Page 11 - Rectifier Handling Safety Instructions

Safety instructions for handling rectifiers, including covering empty slots, avoiding contact with equipment, using gloves when handling hot units, and procedures for replacement or repair.

Page 12 - APS DC Power System Installation and Servicing

Safety and operational instructions for installing and servicing APS DC power systems, covering mounting requirements, environmental conditions, and isolation procedures before service.

Page 13 - Maintenance and Repair Compliance

Safety and compliance instructions for maintaining and repairing APS3 and APS6 power systems, including handling hazardous voltages, authorized personnel, and EMC compliance with FCC rules.

Page 14 - Initial Setup and Mounting Guidelines

Procedures for initial setup, inspecting equipment for transit damage, installation guidelines for mounting rack-mounted and desktop versions, and environmental considerations.

Page 15 - Mounting DC Systems in Enclosed Spaces

Multilingual instructions for mounting DC power systems in racks or cabinets, focusing on ambient temperature limits, airflow maintenance, support distribution, AC input current verification, and earth ground connection.

Page 16 - DC Power System Installation and Connection

Installation and connection instructions for APS DC power systems, covering mounting considerations, minimum clearance requirements, best practices for connecting DC load/battery cables (color coding), and cable specifications (UL ratings, AWG sizes).

Page 17 - Rack-Mounted Power Unit Termination

Installation instructions for terminating and securing load cables on APS3-05X and APS6-05X rack-mounted power units, including torque requirements and component specifications.

Page 18 - Load Cable Installation and Termination Procedures

Step-by-step instructions for installing and terminating load cables, fitting cable clamps, stripping ends, inserting cables, and securing terminations with specified torque while ensuring polarity safety.

Page 19 - External Battery Installation Requirements

Instructions for installing external batteries on specific APC power systems, detailing sizing requirements (backup time, voltage), UL recognition standards, and proper location to prevent gas buildup.

Page 20 - Battery Fault Protection Requirements

Requirements for fault protection devices in series with battery strings, specifying interrupt ratings (10 kA) and internal impedance limits (5.7 mΩ) for 48V battery systems.

Page 21 - Battery Protection Device Installation Safety

Safety instructions for installing battery protection devices in series with cables, ensuring proper positioning near output terminals, fault current interruption capability, and internal impedance requirements.

Page 22 - Connecting Battery Cables and Short Circuit Protection

Instructions for connecting battery cables to APS systems, specifying safety precautions, cable specifications (UL 1283, 4AWG), procedures for preparing cable clamps, and requirements for short circuit protection.

Page 23 - Battery Cable Termination Arrangement

Step-by-step instructions for terminating and arranging battery cables, including connecting positive/negative cables to terminal blocks, applying specified torque, and fitting knockout plugs.

Page 24 - Temperature Sensor and AC Supply Connection

Instructions for installing a battery temperature sensor, connecting its cable to terminal blocks, mounting location for accurate readings, and connecting the APS DC power system to an AC supply.

Page 25 - Electrical Installation and Commissioning Procedures

Installation and commissioning procedures for APS DC power systems, including AC installation requirements, earthling specifications, earth leakage current limits, and step-by-step instructions for inserting Access Power Rectifiers and pre-power-up checks.

Page 26 - System Initialization and Configuration

Steps for initializing and configuring an APS DC power system, including verifying LED indicators, using DCTools software for site-specific settings, applying DC power to the load, and performing manual equalization.

Page 27 - UL Listed Mark and Service Restrictions

Requirements for the UL Listed Mark on specific power supply models and restrictions prohibiting field replacement or repair of output or battery circuit breakers; directing users to local sales offices for service.

Page 28 - Power System Technical Specifications

Technical specifications detailing input voltage/current ratings, IEC AC cord set details, frequency range, maximum earth leakage current, and output capacities for various models under environmental conditions.

Page 29 - Power Equipment Technical Specifications

Technical specifications comparing dimensions and weights of APS3 and APS6 models, and electrical characteristics of rectifier types APR48 and APU48, including input voltage ranges, output power, and current ratings.