Dolmar PS-7310H - Manual

Dolmar PS-7310H

Dolmar PS-7310H – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
43 Page 43
44 Page 44
45 Page 45
46 Page 46
47 Page 47
48 Page 48
49 Page 49
50 Page 50
51 Page 51
52 Page 52
53 Page 53
54 Page 54
55 Page 55
56 Page 56
57 Page 57
58 Page 58
59 Page 59
60 Page 60
61 Page 61
62 Page 62
63 Page 63
64 Page 64
65 Page 65
66 Page 66
67 Page 67
68 Page 68
69 Page 69
70 Page 70
71 Page 71
72 Page 72
73 Page 73
74 Page 74
75 Page 75
76 Page 76
Page: / 76

Table of Contents:

  • Page 3 – Replacing the fuel filter; This product complies with:; engine exhaust system fire ignition
  • Page 4 – Further symbols see page 6.; Chain oil fill/oil pump
  • Page 5 – saw chain
  • Page 6 – Physical Condition; Discription of symbols used on chain
  • Page 7 – The saw; not recommended; The use of the saw; Transporting the chain saw; Proper clothing; Wear protective helmet,
  • Page 8 – Chain saw operating instructions; Fueling
  • Page 9 – Important adjustments; Working conditions; Take extreme care in wet and freezing weather; Cutting instructions; Always hold the saw firmly with both hands when the
  • Page 10 – Reactive forces during the cut, including kickback; a firm foothold. Never work on a ladder, in a tree or on
  • Page 11 – To avoid kickback; Hold the chain saw firmly with both hands and; not experienced with these cutting techniques.; The speed of contact at which the cutter contacts; Saw chain cutter sharpness:; Devices for reducing the risk of kickback injury; deflection guard on the disengaging lever of the chain
  • Page 12 – To avoid pushback; from a plunge cut or under buck cut (figures 25 to; Cutting techniques; Felling
  • Page 13 – Felling instructions:; direction of the fall of the tree and at a 45° angle (fig.
  • Page 14 – Sectioning Method; are extremely dangerous because they involve
  • Page 16 – and screws except the carburetor adjustment screws
  • Page 17 – Denomination of components; Muffler with spark arrester screen; (toothed stop for holding saw steady against wood); Indicate when ordering spare parts!; Identification plate
  • Page 18 – Technical data
  • Page 19 – Mounting the guide bar and saw chain; PUTTING INTO OPERATION; Before doing any work on the guide bar or chain, always
  • Page 20 – Tightening the saw chain
  • Page 21 – STOP; Checking the chain tension; Chain brake; kickback is sufficiently strong.
  • Page 22 – Chain oil; or fire; Fuel mixture; It is not wise to add more engine oil than specified to ensure; The Storage of Fuel
  • Page 23 – Refuelling; FOLLOW THE SAFETY PRECAUTIONS!; cool off before refuelling!; waste oil; NEVER USE WASTE OIL; Important note on bio-degradable chain oils; engine oil
  • Page 24 – Checking the chain lubrication; Never work with the chain saw withoute sufficient chain lubri-; Adjusting the chain lubrication; The engine must be switched off.; influence the oil flow rate. While working make sure there is
  • Page 25 – Do not work with the chain saw without first checking the; firml; until you hear the first ignition.; As described for cold starting, except before starting pull the; Stopping the engine
  • Page 26 – Working in winter; rature combined with high humidity, and below + 5°C in order; At temperatures over +5°C place the insert in position A; Reinstall the filter hood.; Adjusting the carburetor; the engine is warm, with a clean air filter and properly in; SERVICE
  • Page 27 – MAINTENANCE; Sharpening the saw chain; this point, the chain must be replaced (see the Extract from the; Handle heating; ON
  • Page 28 – Files and how to work with them
  • Page 29 – Cleaning the brake band and sprocket interior
  • Page 30 – Replacing the saw chain; CAUTION: Use only chains and guide bars designed for; number consult the “Extract from the spare parts list”.; The felt filter (17; replace the fuel filter once every three months in order to ensure; Cleaning the guide bar
  • Page 31 – Cleaning the air filter; CAUTION: To prevent eye injury, always wear eye protection
  • Page 32 – Replacing the spark plug; A hot engine can cause burns. Wear protective gloves!; Remove the filter cover; Electrode gap; Checking the ignition spark; It should touch only the cylinder; With the spark-plug cap firmly attached to the unscrewed spark; Checking the muffler screws; Do not tighten the muffler screws when the engine is hot!
  • Page 33 – it will be necessary to first de-tension the cable drum return
  • Page 34 – Cleaning the cylinder area; Remove the filter hood and air filter.; IMPORTANT: Put the air filter back on and fasten it. Insert; With the cyinder fin cleaner, clean out the area between the; Mounting the fan housing; Let cool the engine down for sure!
  • Page 35 – Maintenance and repair
  • Page 36 – Troubleshooting; Malfunction
  • Page 37 – Extract from the spare parts list
  • Page 39 – Vérifier le frein de chaîne de sécurité; Sommaire; Nettoyage du filtre d’air; Ce produit est en conformité avec:; Société du génie automobile
  • Page 40 – additionnels voir page 42.
  • Page 41 – chaîne; Mesures de sécurité supplémentaires
  • Page 42 – Condition physique; Description des symboles figurant sur
  • Page 43 – Utilisation de la tronçonneuse; Transport de la tronçonneuse
  • Page 44 – Instructions d’utilisation de la tronçonneuse; Ravitaillement en carburant
  • Page 45 – Instructions de coupe
  • Page 46 – Choc de recul; à la fin d’une coupe. Sous l’effet de la pression, le; Forces de réaction pendant la coupe, y compris; de réaction s’exercent immédiatement. Ces forces
  • Page 48 – Pour éviter le recul; Soyez attentif aux forces ou aux situations dans; Pour éviter la traction; Techniques de coupe; Abattage; toutes les conditions pouvant influencer le sens de; Examinez toujours l’état général de l’arbre. Cherchez
  • Page 49 – en sécurité à une distance suffisante de l’arbre mais; Instructions d’abattage:
  • Page 50 – Méthode de sectionnement; méthodes sont extrêmement dangereuses car elles; Méthode de coupe en plongée; Les arbres d’un diamètre supérieur à deux fois la longueur
  • Page 51 – aux rondins qui roulent.; Débitage; Soyez extrêmement prudent lorsque vous; Ebranchage; guide. Soyez extrêmement prudent et évitez tout
  • Page 53 – Désignation des pièces; (Butée à griffe pour maintenir; Plaque signatique
  • Page 54 – également disponibles.; Caractéristiques techniques
  • Page 55 – dans le sens de la flèche sur la partie supérieure du guide !; Montage du guide et de la chaîne de sciage; Dévisser les écrous de fixation (2; MISE EN ROUTE; Pour tous travaux effectués sur le guide de la chaîne de
  • Page 56 – Tendre la chaîne de sciage
  • Page 57 – Contrôle de la tension de la chaîne; Par conséquent, vérifier souvent la tension de la chaîne le; Retendre la chaîne de sciage; Desserrer les écrous de fixation (2) d’un tour environ au; Enclencher le frein de chaîne; En cas de contrecoup suffisamment fort, le frein de chaîne se; (flèche 2) jusqu’à son enclenchement. Le frein à frein est; Frein de chaîne; automatiquement en cas de contrecoup suffisamment fort par
  • Page 58 – Mélange carburant
  • Page 59 – Remplissage des réservoirs; RESPECTER IMPERATIVEMENT LES REGLES DE; Après avoir rempli le réservoir, nettoyer le bouchon fileté,; Pour graisser suffisamment la chaîne de sciage, il faut qu’il y ait; Huile; N’UTILISEZ JAMAIS DE HUILES USAGEES; Une huile usagée est extrêmement dangereuse pour; EVITEZ LE CONTACT AVEC LA PEAU ET LES YEUX; Le contact avec les yeux de l’huile conduit à des irritations. en cas; Remarque importante pour les huiles de chaîne
  • Page 60 – Vérifier le graissage de la chaîne; ), ainsi que les orifices d’entrée d’huile dans le guide; Réglage du graissage de la chaîne; A effectuer que si le moteur est arrêté!
  • Page 61 – Le frein de chaîne doit être vérifié avant de commencer; dans la sens de la flèche jusqu’à; Arrêter le moteur
  • Page 62 – Réglage du carburateur; Seules les rectifications au niveau de la vis de réglage (S)
  • Page 63 – TRAVAUX DE MAINTENANCE; Affûtage de la chaîne; et la fiche de bougie doit être enlevée; signifient une marche dure de la chaîne et peuvent provoquer; Chauffage de poignée
  • Page 64 – Lime et guidage de la lime
  • Page 65 – Une fois le montage effectué, vérifier le fonctionnement
  • Page 66 – Nouvelle chaîne de sciage; ATTENTION: N’utiliser que des chaînes et guide permises; Remplacement du filtre à carburant; ATTENTION! Porter impérativement des gants de
  • Page 68 – Remplacement de bougie; Les bougies d’allumage ou la fiche de la bougie ne doivent; Vérification de l’étincelle d’allumage; fixée au moyen de la pince; Vérification des vis du silencieux; Retirer auparavant les deux bouchons (11; Re-enfoncer les bouchons après vérification !
  • Page 69 – Enlever les vieux restes de cordon.; montré sur la figure (en n’oubliant pas la rondelle (8; d’enroulement et tourner deux fois le tambour avec le cordon
  • Page 70 – Nettoyage de l’espace cylindre; Enlever le capot du filtre et le filtre à air.; IMPORTANT : Remettre le filtre à aire en place et le fixer,; Montage du carter du ventilateur; impératif de laisser refroidir le moteur !
  • Page 71 – Maintenance et réparations
  • Page 72 – Recherche de pannes; Panne
  • Page 73 – Extrait de la liste des pièces de rechange
  • Page 76 – DOLMAR POWER PRODUCTS; birth defects or other reproductive harm.
Loading the manual

Operator’s and Safety Manual

for Gasoline Chain Saws

(page 2 - 37)

Manuel d’emploi et de sécurité

de tronçonneuses thermiques

(page 38 - 73)

WARNING!

Read and understand this Manual. Always follow safety precautions in the Operator’s and Safety Manual. Improper use can cause serious injury! Preserve this Manual carefully!

WARNING!

FUELS WITH MORE THAN 10% ETHANOL ARE NOT APPROVED FOR USE IN DOLMAR 2-STROKE ENGINES!

Use of alternative fuels, such as E-20

(20% ethanol)

, E-85

(85% ethanol)

or any fuels not meeting DOLMAR requirements are not approved for use in DOLMAR 2-stroke gasoline engines!

USE OF ALTERNATIVE FUELS CAN CAUSE THE FOLLOWING PROBLEMS:

Poor engine performance, loss of power, overheating, fuel vapor lock, improper clutch engagement, premature deterioration of fuel lines, premature deterioration of gaskets,

premature deterioration of carburetors.

USING ALTERNATIVE FUELS AND/OR 2-STROKE OILS NOT ACCORDING TO JASO FC OR ISO-L-EGD IN DOLMAR 2-STROKE ENGINES WILL VOID YOUR ENGINE WARRANTY!

ATTENTION!

Suivez toujours les conseils de sécurité du présent manuel d’emploi et de sécurité. Une utilisation incorrecte de la tronçonneuse peut entraîner des blessures graves!

Lisez et comprenez ce manuel. Conservez avec soin ce manuel!

ATTENTION!

LES CARBURANTS CONTENANT PLUS DE 10 % D’ÉTHANOL NE SONT PAS AUTORISÉS POUR L’UTILISATION DANS LES MOTEURS 2 TEMPS!

Les carburants alternatifs, tels que E-20

(20 % d‘éthanol)

, E-85

(85 % d’éthanol)

ou tout autre carburant n’étant pas conformes aux exigences DOLMAR ne sont pas autorisés

pour l’utilisation dans les moteurs essence à 2 temps DOLMAR!

L’UTILISATION DE CARBURANTS ALTERNATIFS PEUT CAUSER LES PROBLÈMES SUIVANTS:

Faible performance moteur, Perte de puissance, Surchauffe, Bouchons de vapeur dans la conduite d’essence, Embrayage incorrect, Détérioration prématurée des conduites

d’essence, Détérioration prématurée des joints d’étanchéité, Détérioration prématurée des carburateurs.

L’UTILISATION DE CARBURANTS ALTERNATIFS ET/OU D’HUILES 2 TEMPS NON-CONFORMES À LA NORME JASO FC OU ISO-L-EGD DANS LES MOTEURS À 2 TEMPS

DOLMAR ANNULERA VOTRE GARANTIE MOTEUR!

PS-7310, PS-7310 H

PS-7910, PS-7910 H

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - Replacing the fuel filter; This product complies with:; engine exhaust system fire ignition

3 The PS-7310 and PS-7910 will be delivered in a protective cardboard box to prevent transport damage. Cardboard is a basic raw material and is consequently reuseable or suitable for recycling (waste paper recycling). Contents Page Delivery inventory ....................................................

Page 4 - Further symbols see page 6.; Chain oil fill/oil pump

4 Delivery inventory Symbols You will notice the following symbols on the chain saw and in the Operator’s and Safety Manual. Further symbols see page 6. In case one of the parts listed should not be included in the delivery inventory, please consult your sales agent. 1 Chain saw 2 Guide bar 3 Saw ch...

Page 5 - saw chain

5 Additional safety precautions The following additional safety precautions must be observed by all users of chain saws: 1. Do not operate a chain saw when you are fati- gued. 2. Use safety footwear; snug-fitting clothing; protec - tive gloves; and eye, hearing, and head protection devices. 3. Use c...

Other Dolmar Models

All Dolmar Other